34 Inch 420cc Two Stage Snow Thrower SJ1151XD-D
The SJ1151XD-D is a two stage walk behind snow thrower built for municipal crews, contractors and dealers who have to clear deep compacted snow rather than a light dusting. A 420cc Loncin L190FDS engine drives an 86cm auger and impeller assembly that takes in snow up to 58.4cm deep and throws it 10 to 15 metres clear of the path. The machine carries CE marking for Europe and ships 84 units to a 40HQ container, which is what makes it practical for importers buying a full season of stock in one shipment.
- Clears 86cm in one pass so a standard driveway or footpath is finished in two runs instead of five
- 58.4cm intake height handles the compacted ridge a road plough leaves across a driveway entrance
- 10 to 15m throwing distance keeps cleared snow off the lane you have already finished
- Manual and electric start on the same machine so a cold morning does not cost the operator a recoil pull
- CE marked for Europe, which removes the compliance step for EU importers
- 84 units per 40HQ container keeps freight cost per machine low for a full season order
Product Gallery
Specifications
| Model No | SJ1151XD-D |
|---|---|
| Engine Brand | Loncin L190FDS, OHV, 4 stroke |
| Power | 9.0kW / 3600rpm |
| Displacement | 420cc |
| Start Mode | Manual start and electric start |
| Fuel Capacity | 6.5L |
| Oil Capacity | 1.1L |
| Fuel Consumption | 1.8L/h |
| Transmission Mode | Chain drive |
| Clearing Width | 34″ / 86cm |
| Clearing Height | 23″ / 58.4cm |
| Throwing Distance | 10-15m |
| Forward / Reverse Speeds | 6 forward / 2 reverse |
| Chute Rotation | 190° |
| Wheels | 16×5″ |
| Auger Diameter | 12″ (30.48cm) |
| Certification for Europe | CE Standard |
| Packing | Cardboard box, 1pc per carton |
| Carton Size | 110*90*92cm |
| Gross / Net Weight | 125 / 115kg |
| Loading 20′ / 40′ / 40HQ | 24 / 70 / 84pcs |
| Warranty | One year |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Municipal crews clearing footpaths, pedestrian crossings and bus stops where a truck plough cannot reach
- Facility teams keeping car parks, loading bays and fire exits open through a snow event
- Contractors running fixed seasonal routes across several commercial properties in one morning
- Rural properties with long access drives that get drifted shut overnight
- Equipment rental fleets that need a machine tolerant of untrained operators
Who It Is For
- Importers and distributors stocking two stage snow equipment for the European and North American season
- Municipal and highway maintenance departments
- Property and facility management contractors
- Equipment hire and rental companies
- Retail chains running a winter seasonal range
Problems It Solves
- Single stage machines stall in wet compacted snow; the two stage auger and impeller layout keeps feeding under load
- Narrow clearing widths force repeat passes and blow out the labour budget on a fixed route
- Short throwing distance dumps snow back onto cleared ground and doubles the work
- Recoil only machines are slow to start in low temperatures and frustrate seasonal staff
- Uncertified machines leave the EU importer carrying the CE compliance burden
Technical Features
- Two stage clearing with a 12 inch auger feeding a separate impeller
- Loncin L190FDS OHV four stroke engine rated 9.0kW at 3600rpm
- Chain drive transmission with six forward and two reverse speeds
- 190 degree chute rotation for directing discharge away from traffic and buildings
- 16 by 5 inch wheels for traction on packed snow and ice
- Manual and electric start fitted as standard
- Fuel consumption of 1.8L per hour from a 6.5L tank
Certifications
- CE Standard for Europe
Quality Control
- Incoming inspection on engines, gearboxes and steel before they reach the line
- In process checks during welding and assembly of the auger housing
- 100% finished machine inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and decal set
- Manual and packaging artwork in the destination market language
- Retail colour box or bulk carton packing to suit the sales channel
How It Compares
Against Single stage snow thrower
A single stage machine relies on the auger alone to throw snow and bogs down in wet or compacted snow. The two stage impeller keeps throwing distance steady as the load rises.
Against Smaller 6.5HP snow thrower
The 420cc machine clears 86cm against roughly half that on a small household unit, which matters when the route is measured in kilometres rather than metres.
Against ATV mounted snow blade
A blade pushes snow to the side and needs somewhere to put it. This machine throws snow 10 to 15m clear, which suits confined footpaths and car parks.
Use Guide
- Fill with fresh unleaded fuel and check oil level before the first start of the season
- Set chute rotation away from traffic, parked vehicles and building glazing before engaging the auger
- Start in a low forward gear on deep or compacted snow and increase speed only once the auger clears freely
- Stop the engine before clearing a blocked chute and use a clearing tool, never a hand
- Drain or stabilise fuel at the end of the season and grease the auger shaft before storage
36″ 420CC Snow thrower Buyer Questions
What is the minimum order quantity?
One 20ft container, which holds 24 units of this model. Single sample orders are also accepted if you want to test the machine before committing to a container.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Is the machine CE certified for the European market?
Yes. This model is produced to CE standard for Europe.
How many units fit in a container?
24 units in a 20ft, 70 units in a 40ft and 84 units in a 40HQ, packed one machine per cardboard carton at 110*90*92cm.
What warranty and spare parts support do you provide?
One year warranty. Parts needed because of a quality problem are supplied free of charge, and parts outside the warranty period are sold at cost price.
Can the machine be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme, manual and packaging artwork.
Which port do you ship from?
Ningbo or Shanghai, whichever gives the better sailing for your destination.
Other Models in Snow Throwers
Wheels snow shovel
View Specifications →
Multi-function snow plough
View Specifications →
Riding snow blower
View Specifications →
ATV Snowplow
View Specifications →
733 Best snow blower 2024
View Specifications →
732 Gasoline snow shovel
View Specifications →
732 Snow blower gas
View Specifications →
15HP Gasoline spreader
View Specifications →Guides That Help You Specify This
How to Choose a Snow Thrower for a Commercial Clearing Route
Clearing width, intake height and drive type decide how long a fixed route takes. Here is how to specify a machine against the route rather than against a brochure.
Read the guide →Snow Thrower Against Snow Sweeper Which Machine Suits Your Surfaces
Augers and brushes solve different problems. Choosing the wrong one costs either clearing capacity or the surface underneath.
Read the guide →Snow Blower Spare Parts a Pre Season Stocking List
The parts that actually stop a machine mid route are cheap, small and never in stock when they are needed. Stock them in autumn instead.
Read the guide →Request a Quotation for the 36″ 420CC Snow thrower
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.