SJ733 Walk Behind Snow Blower 420cc 110cm Working Width
The SJ733 is a walk behind snow clearing machine for contractors, facility teams and dealers who need a wide working head on a machine one person can still push into a footpath or a loading bay. A Loncin G420FE OHV four stroke engine of 420cc, rated 9.0kW at 3600rpm, drives a 110cm working head with a 50cm brush through a gear transmission, covering up to 5000 square metres an hour. Manual and electric start are both fitted, there are 3 forward and 3 reverse speeds, and the working head angles 25 degrees left or right so snow is placed clear of the ground already done. The machine carries CE marking for Europe and loads 58 units to a 40HQ container at 130kg gross each.
- 110cm working width in one pass, so a standard footpath is finished in a single run instead of two
- Up to 5000 square metres an hour, which is what makes a fixed commercial route achievable in a morning
- Manual and electric start on the same machine so a cold morning does not cost the operator a recoil pull
- 3 forward and 3 reverse speeds for backing out of a bay or a dead end without turning the machine
- Working head angles 25 degrees either way to keep snow off the lane already cleared
- Universal 6 inch wheels alongside the 5.00-10 drive wheels for manoeuvring in confined areas
- 58 units per 40HQ container keeps freight cost per machine low for a full season order
- CE marked for Europe, which removes the compliance step for EU importers
Product Gallery
Specifications
| Model No | SJ733 |
|---|---|
| Engine Brand | Loncin G420FE, OHV, 4 stroke |
| Power | 9.0Kw / 3600rpm |
| Displacement | 420cc |
| Start Model | Manual start & electric start |
| Fuel Capacity | 6.5L |
| Oil Capacity | 1.1L |
| Fuel Consumption | 1.8L/H |
| Area Sweep (Max) | 5000 m²/H |
| Transmission Mode | Gear |
| Working Width | 110cm / 43.3” |
| Brush Diameter | 50cm / 19.7″ |
| Forward / Reverse Speeds | 3 / 3 reverse |
| Wheels | 5.00-10 |
| Universal Wheel | 6″ wheels |
| Working Head Adjustable Angle | Left 25 degrees, right 25 degrees |
| Easy Fast Assembly | Yes |
| Packing | Wooden box, 1PC/2Cartons |
| Certification for Europe | CE Standard |
| Gross / Net Weight | 130 / 120kg |
| Carton Size | 125*115*92cm |
| Warranty | One year |
| Loading 20′ / 40′ / 40HQ | 24 / 50 / 58pcs |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Municipal crews clearing footpaths, crossings and bus stops where a truck plough cannot reach
- Facility teams keeping car parks, loading bays and fire exits open through a snow event
- Contractors running fixed seasonal routes across several commercial properties
- Schools, hospitals and campuses clearing pedestrian routes before opening
- Equipment rental fleets that need a machine tolerant of untrained operators
Who It Is For
- Importers and distributors stocking walk behind snow equipment for the season
- Municipal and highway maintenance departments
- Property and facility management contractors
- Equipment hire and rental companies
- Retail chains running a winter seasonal range
Problems It Solves
- Narrow clearing widths force repeat passes and blow out the labour budget on a fixed route
- Recoil only machines are slow to start in low temperatures and frustrate seasonal staff
- A single reverse speed makes a machine awkward in car park bays and dead end footpaths
- A fixed working head throws snow back onto ground already cleared and doubles the work
- Ride on machines will not fit the footpaths and entrances that actually have to be cleared first
- Uncertified machines leave the EU importer carrying the CE compliance burden
Technical Features
- Loncin G420FE OHV four stroke engine of 420cc rated 9.0kW at 3600rpm
- Manual start and electric start fitted as standard
- Gear transmission with 3 forward and 3 reverse speeds
- 110cm working width with a 50cm brush
- Maximum area sweep rate of 5000 square metres per hour
- Working head adjustable 25 degrees left and 25 degrees right
- 5.00-10 drive wheels with 6 inch universal wheels
- Fuel consumption of 1.8L per hour from a 6.5L tank with 1.1L oil capacity
- Fast assembly on arrival
Certifications
- CE Standard for Europe
Quality Control
- Incoming inspection on engines, gearboxes and steel before they reach the line
- In process checks during welding and assembly of the working head
- 100% finished machine inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and decal set
- Manual and packaging artwork in the destination market language
- Wooden box or bulk packing to suit the sales channel
How It Compares
Against Narrower walk behind snow machine
At 110cm working width and up to 5000 square metres an hour, this machine halves the pass count on a route that a sub 60cm machine would take all morning.
Against Ride on snow machine
A ride on unit covers open ground faster but will not enter narrow footpaths, entrances and bays. This walk behind machine goes where the route actually is.
Against Diesel powered version of the same frame
This model uses a Loncin 420cc gasoline engine at 9.0kW. The diesel version of the same 110cm frame runs 6.8kW, which matters where fuel availability drives the choice.
Against Recoil start only machine
Manual and electric start are both fitted, so a cold start does not depend on an operator pulling a recoil at low temperature.
Use Guide
- Fill with fresh unleaded fuel and check the oil level before the first start of the season
- Set the working head angle away from traffic, parked vehicles and building glazing before engaging the head
- Start in a low forward gear on deep or compacted snow and increase speed only once the head clears freely
- Stop the engine before clearing a blockage and use a clearing tool, never a hand
- Use the universal wheels to reposition the machine rather than dragging it under power
- Drain or stabilise fuel at the end of the season and grease the working head shaft before storage
733 Best snow blower 2024 Buyer Questions
What is the minimum order quantity?
One 20ft container, which holds 24 units of this model. Single sample orders are also accepted if you want to test the machine before committing to a container.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Is the machine CE certified for the European market?
Yes. This model is produced to CE standard for Europe.
How many units fit in a container?
24 units in a 20ft, 50 units in a 40ft and 58 units in a 40HQ, packed in a wooden box at 125*115*92cm.
How much ground can it cover in an hour?
Up to 5000 square metres an hour, with a working width of 110cm and a 50cm brush.
What warranty and spare parts support do you provide?
One year warranty. Parts needed because of a quality problem are supplied free of charge, and parts outside the warranty period are sold at cost price.
Can the machine be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme, manual and packaging artwork.
Other Models in Snow Sweepers
Wheels snow shovel
View Specifications →
Multi-function snow plough
View Specifications →
Riding snow blower
View Specifications →
ATV Snowplow
View Specifications →
732 Gasoline snow shovel
View Specifications →
732 Best snow blower with diesel engine
View Specifications →
15HP Gasoline spreader
View Specifications →
15HP Gasoline snowplow
View Specifications →Request a Quotation for the 733 Best snow blower 2024
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.