Riding Snow Blower SJ-D0150-1 500cc 150cm Working Width
The SJ-D0150-1 is a seated ride on snow blower for commercial property owners, contractors and large private sites that have driveways, car parks and footpaths to clear rather than a single path. An 11kW 500cc gasoline engine with electrical start drives the machine through a gear transmission at 4.5km/h, and the 150cm working head carries a 55cm brush turning at up to 400rpm, covering between 3600 and 26000 square metres an hour depending on conditions. The operator sits and steers instead of walking behind the machine, which is what makes a large area practical for one person in the hours before the site opens. It carries CE marking for Europe and loads 15 units to a 40HQ container.
- Seated operation means one person covers a car park sized area without walking every metre of it
- 150cm working width in one pass, so a wide driveway is done in a single run rather than three
- Up to 26000 square metres per hour sweeping rate for sites measured in hectares rather than metres
- Brush speed up to 400rpm keeps the surface cleared rather than smeared on a second pass
- 3 forward and 3 reverse speeds, so the operator can back out of a bay without turning the machine
- Working head angles 25 degrees left or right to direct snow away from the area already cleared
- CE marked for Europe, which removes the compliance step for EU importers
Product Gallery
Specifications
| Model No | SJ-D0150-1 |
|---|---|
| Engine Power | Gasoline engine 11Kw |
| Displacements | 500cc |
| Forward / Reverse Speeds | 3 forward and 3 reverse |
| Start Mode | Electrical start |
| Fuel Capacity | 15L |
| Vehicle Speed | 4.5km/h |
| Brake System | Front and rear brake disc |
| Load Capacity | 200kg |
| Seats | 1 People |
| Area Sweep (Max) | 3600-26000 m²/H |
| Transmission Mode | Gear |
| Working Width | 150cm / 59″ |
| Brush Diameter | 55cm / 21.7″ |
| Brush Rotate Speed | 400rpm (max) |
| Working Head Adjustable Angle | Left 25 degrees, right 25 degrees |
| Easy Fast Assembly | Yes |
| Packing | Iron rack + wooden box, 1PC/2Carton |
| Certification for Europe | CE Standard |
| Gross / Net Weight | 600 / 500kg |
| Carton Size | 300*150*110cm |
| Warranty | One year |
| Loading 20′ / 40′ / 40HQ | 6 / 13 / 15pcs |
Figures as supplied by the factory. Confirm critical dimensions in writing before ordering.
Application Scenarios
- Commercial property owners clearing car parks, service yards and entrance areas before opening
- Contractors covering several sites on a fixed seasonal route in one morning
- Large private and rural properties with long driveways and hard standing
- Facility teams keeping loading bays and fire exits open through a snow event
- Equipment rental fleets offering a ride on machine for seasonal hire
Who It Is For
- Importers and distributors stocking ride on snow equipment
- Commercial property and facility management companies
- Snow clearing and grounds maintenance contractors
- Equipment hire and rental companies
- Municipal and campus maintenance depots
Problems It Solves
- Manual shovelling and walk behind machines cannot cover a car park in the hours before a site opens
- Narrow clearing widths force repeat passes and blow out the labour cost on a fixed route
- Walking behind a machine through a full shift in low temperature is what loses seasonal staff
- A fixed working head dumps snow back onto ground already cleared, so the angle needs to swing 25 degrees either way
- Machines with only one reverse speed are slow to manoeuvre in parking bays and tight yards
- Uncertified machines leave the EU importer carrying the CE compliance burden
Technical Features
- 11kW 500cc gasoline engine with electrical start
- Gear transmission with 3 forward and 3 reverse speeds and a travel speed of 4.5km/h
- 150cm working width with a 55cm brush turning at up to 400rpm
- Maximum area sweep rate of 3600 to 26000 square metres per hour
- Working head adjustable 25 degrees left and 25 degrees right
- Front and rear brake discs
- Single seat operator station with a 200kg load capacity
- 15L fuel tank
- Fast assembly on arrival
Certifications
- CE Standard for Europe
Quality Control
- Incoming inspection on engines, transmissions and steel before they reach the line
- In process checks during welding and assembly of the frame and working head
- Brake and drive function check before packing
- 100% finished machine inspection before packing
- Full order inspection before shipment with real time production status shared with the buyer
Customization Options
- OEM and ODM production to buyer drawings and specification
- Buyer branding, colour and decal set
- Manual and packaging artwork in the destination market language
- Packing configuration to suit the sales channel
How It Compares
Against Walk behind snow blower
A walk behind machine ties the operator to walking pace for the whole shift. Seated operation with a 150cm head is what makes a car park sized area a one person job.
Against Snow blade on a utility vehicle
A blade pushes snow along and needs somewhere to put it. The 55cm brush at 400rpm clears the surface and the head angles 25 degrees either side to place the snow.
Against Compact tractor with a sweeper attachment
A tractor and attachment is two purchases and a hitch to match. This is a single machine at 600kg gross with the head already fitted.
Use Guide
- Check fuel and oil levels and brake operation before the first run of the shift
- Set the working head angle away from traffic, parked vehicles and building glazing before starting a pass
- Work in a low gear on packed snow and increase speed only once the brush is clearing freely
- Keep within the 200kg load capacity and use the front and rear brakes early on a slope
- Raise the working head for transport and store the machine with the brush off the ground
- Drain or stabilise fuel at the end of the season before storage
Riding snow blower Buyer Questions
What is the minimum order quantity?
One 20ft container, which holds 6 units of this model. Single sample orders are also accepted if you want to test the machine before committing to a container.
How long is the lead time?
25 to 35 days for a full 40HQ container. A sample order ships in 1 to 7 days.
Is the machine CE certified for the European market?
Yes. This model is produced to CE standard for Europe.
How many units fit in a container?
6 units in a 20ft, 13 units in a 40ft and 15 units in a 40HQ, packed on an iron rack in a wooden box at 300*150*110cm.
How large an area can it clear in an hour?
The maximum area sweep rate is 3600 to 26000 square metres per hour, with a 150cm working width and a brush speed up to 400rpm.
What warranty and spare parts support do you provide?
One year warranty. Parts needed because of a quality problem are supplied free of charge, and parts outside the warranty period are sold at cost price.
Can the machine be supplied under our own brand?
Yes. OEM and ODM production is available, including buyer branding, colour scheme, manual and packaging artwork.
Other Models in Snow Sweepers
Wheels snow shovel
View Specifications →
Multi-function snow plough
View Specifications →
ATV Snowplow
View Specifications →
733 Best snow blower 2024
View Specifications →
732 Gasoline snow shovel
View Specifications →
732 Best snow blower with diesel engine
View Specifications →
15HP Gasoline spreader
View Specifications →
15HP Gasoline snowplow
View Specifications →Request a Quotation for the Riding snow blower
Send your quantity and destination and we will come back within 24 hours with price, container loading and lead time.