Home/Knowledge Center
Filtration Selection Guides For Buyers And Plant Engineers
Short practical guides on the decisions that come up when you are specifying or replacing a filter element. No product pitch, just the reasoning we would walk you through on a call.
How To Choose A Micron Rating For Cartridge Filters
Absolute versus nominal ratings, choosing from the stage you protect, and why rating drives change-out cost more than unit price.
Read Guide
High Flow Cartridges Compared With Standard 2.5 Inch Cartridges
Compare element count, footprint, change-out labour, and cost per cycle between 6 inch and 6.5 inch high flow cartridges and traditional 2.5 inch cartridges.
Read Guide
O-Ring Material Selection For Filter Cartridges
Choose EPDM, Viton, Buna, or Silicone o-rings based on fluid and temperature. All rated up to 80℃. Avoid mismatched materials to prevent failure.
Read GuideMelt Blown Compared With String Wound Depth Cartridges
Compare graded density, media migration, dirt holding capacity, and suitable duties for melt blown and string wound depth cartridges. Both handle 80℃ and 100μm
Read Guide
Bag Filters Compared With Cartridge Filters
Compare liquid filter bags and pleated bag cartridges. Learn when each is right for your process, and how they fit standard SBS swing bolt housings.
Read Guide
Matching Replacement Cartridges To Your Filter Housing
Find the right replacement cartridge by matching outer diameter, length, adapter, O-ring, and flow direction. We confirm fit based on your housing model and cur
Read GuideNot Sure Which Cartridge Fits Your Duty
Tell us the housing, the fluid and what sits downstream and we will recommend a configuration.