Liquid filter cartridges and housings made in Jiangyan, Taizhou since 2009[email protected]+8618051183600
HomeAll ProductsHigh Flow Filter CartridgesPleated Filter CartridgesDepth Filter CartridgesCarbon Filter CartridgesFilter HousingsLiquid Filter BagsWater Treatment And RO SystemsFood And Beverage PlantsChemical And Coatings PlantsPharmaceutical And Life ScienceElectronics And SemiconductorOil And Gas OperationsOEM Cartridge Cross ReferenceRO Pretreatment FiltrationReducing Cartridge Change-Out CostSanitary And Corrosive Duty FiltrationKnowledge CenterDownloadsAboutContact
Finished high flow filter cartridges on the production floor

Home/Industries/Water Treatment And RO Systems

Filtration For Water Treatment And RO Systems

Water treatment plants and RO system integrators need cartridges that fit existing housings, maintain a consistent micron rating, and arrive without long OEM lead times. Mykro Filter supplies dimensional equivalents to common OEM series so plants can keep their current housings and reduce cartridge spend.

Talk To An Engineer Cartridges For This Duty
Pain Points

What Goes Wrong On This Duty

  • A colloid breakthrough at prefiltration causes unplanned membrane cleaning and lost production
  • Cartridge change-out on a large RO train ties up operators that the plant does not have
  • Long OEM lead times force the store to carry spare stock it would rather not fund
  • Differential pressure climbs faster than expected, ending the run early
What Buyers Need

What This Duty Demands Of A Cartridge

  • An element that fits the installed housing bore, seat and length without adapters
  • A stated micron rating that behaves the same from batch to batch
  • Enough dirt holding capacity to reach the planned change-out interval
  • An elastomer compound compatible with the feed and cleaning chemistry
Recommended Products

Cartridges And Housings For This Duty

These are the series buyers in this sector ask for most often. Send your housing model and we will narrow it down.

Large diameter high flow filter cartridge with moulded handle
High Flow Cartridges

HFMV Series High Flow Filter Cartridges

HFMV is a 6.5 inch large diameter high flow cartridge with a vertically pleated polypropylene pack, an inner core and an injection moulded outer cage.

View Specifications
Labelled schematic of the Ultro Series High Flow Filter Cartridges showing construction and connection detail
High Flow Cartridges

Ultro Series High Flow Filter Cartridges

Ultro Series is a 6 inch large diameter high flow cartridge with a radial pleated polypropylene pack, an inner core, and a support layer.

View Specifications
Labelled schematic of the HFPL Series Stainless Steel High Flow Filter Cartridges showing construction and connection detail
High Flow Cartridges

HFPL Series Stainless Steel High Flow Filter Cartridges

HFPL is a 6 inch large diameter high flow cartridge with a pleated microfiber polypropylene or fiberglass media pack, a coreless construction, and an

View Specifications
Depth filter cartridges in melt blown and wound construction
Depth Cartridges

PP Melt Blown Depth Filter Cartridges

PP Melt Blown Depth Filter Cartridges are made from polypropylene fibers spun into a three dimensional network that captures particles throughout the

View Specifications
Labelled schematic of the String Wound Depth Filter Cartridges showing construction and connection detail
Depth Cartridges

String Wound Depth Filter Cartridges

HFSW is a string wound depth filter cartridge with a continuous yarn structure that forms a graded density media pack.

View Specifications
Labelled schematic of the PP Pleated Filter Cartridges showing construction and connection detail
Pleated Cartridges

PP Pleated Filter Cartridges

PP pleated filter cartridges are depth pleated cartridges with a single piece full length polypropylene media pack, an inner core, and an injection mo

View Specifications
Typical Scenarios

Where The Cartridges Sit In The Line

RO Prefiltration

Cartridges immediately ahead of membrane racks, sized so differential pressure stays within the run window.

Municipal Polishing

Final particulate removal before distribution or storage.

Reclaimed Water

Protecting downstream equipment on a reuse stream with variable solids load.

Desalination Trains

Pre-treatment for reverse osmosis systems handling high-salinity feed water.

How We Work

From Enquiry To Repeat Supply

Send The Duty

Housing model, current cartridge part number, flow, fluid and target rating.

We Cross Reference

We confirm the equivalent series, length, adapter and O-ring against your installed vessel.

Sample And Trial

A sample quantity in the exact configuration so you can log differential pressure over a real run.

Production Supply

Repeat orders in the confirmed configuration with the same carton marking each time.

Delivery

What To Expect On Supply

  • Cartridges configured to the order code rather than picked from generic stock
  • Individually bagged and cartoned for export
  • Carton marking to your part number when you resell
  • WhatsApp thread kept per account so the configuration history is one message away
Related Guides

Reading For This Industry

High Flow Cartridges Compared With Standard 2.5 Inch Cartridges

Compare element count, footprint, change-out labour, and cost per cycle between 6 inch and 6.5 inch high flow cartridges and traditional 2.5 inch cartridges.

Read Guide

Matching Replacement Cartridges To Your Filter Housing

Find the right replacement cartridge by matching outer diameter, length, adapter, O-ring, and flow direction. We confirm fit based on your housing model and cur

Read Guide

How To Choose A Micron Rating For Cartridge Filters

Absolute versus nominal ratings, choosing from the stage you protect, and why rating drives change-out cost more than unit price.

Read Guide
FAQ

Water Treatment And RO Systems Filtration FAQ

Can you match the element on my RO skid?
Send the housing model and the code printed on the cartridge you pull out. We confirm diameter, length, adapter and O-ring before quoting.
What micron rating should I run ahead of membranes?
It depends on the feed and the membrane supplier's guidance. Tell us the feed and the current rating and we will suggest a starting point.
Do you supply the housings as well?
Yes. We supply cartridge, bag and lenticular housings in stainless steel and plastic alongside the elements.
How do I trial before switching?
Order a sample set, log clean differential pressure and run length, then compare against your current element.
What information speeds up a quotation?
Housing model, cartridge code, quantity per year and destination port.

Tell Us What Your Line Has To Protect

Send the duty, the housing model and the element you run today and we will come back with a configuration rather than a catalogue.

Chat on WhatsApp Email Us All Products