Liquid filter cartridges and housings made in Jiangyan, Taizhou since 2009[email protected]+8618051183600
HomeAll ProductsHigh Flow Filter CartridgesPleated Filter CartridgesDepth Filter CartridgesCarbon Filter CartridgesFilter HousingsLiquid Filter BagsWater Treatment And RO SystemsFood And Beverage PlantsChemical And Coatings PlantsPharmaceutical And Life ScienceElectronics And SemiconductorOil And Gas OperationsOEM Cartridge Cross ReferenceRO Pretreatment FiltrationReducing Cartridge Change-Out CostSanitary And Corrosive Duty FiltrationKnowledge CenterDownloadsAboutContact
Schematic of a multi bag filter housing

Home/Industries/Oil And Gas Operations

Filtration For Oil And Gas Operations

Oil and gas operations filter completion fluids, workover fluids, injection water, polishing brines and produced water on well sites and in gas plants, where dirt holding capacity directly affects change-out frequency and cost.

Talk To An Engineer Cartridges For This Duty
Pain Points

What Goes Wrong On This Duty

  • Frequent cartridge changes due to low dirt holding capacity increase downtime and operational cost
  • Inconsistent filtration performance leads to downstream equipment damage or process contamination
  • Long lead times for OEM cartridges disrupt maintenance schedules on remote well sites
  • Chemical incompatibility causes premature media degradation or O-ring failure
What Buyers Need

What This Duty Demands Of A Cartridge

  • Cartridge with high dirt holding capacity for extended service life in high-solids fluids
  • Dimensional equivalent to common OEM housings to avoid retrofitting
  • Materials compatible with aggressive oilfield fluids and cleaning agents
  • Clear micron rating and configuration code for repeatable ordering
Recommended Products

Cartridges And Housings For This Duty

These are the series buyers in this sector ask for most often. Send your housing model and we will narrow it down.

Labelled schematic of the HFOF Series Oilfield Filter Cartridges showing construction and connection detail
High Flow Cartridges

HFOF Series Oilfield Filter Cartridges

HFOF is a 64mm outer diameter high flow cartridge designed for oilfield fluids such as well completion fluids, work over fluids, injection water, poli

View Specifications
Labelled schematic of the HFPP Series String Wound High Flow Filter Cartridges showing construction and connection detail
Depth Cartridges

HFPP Series String Wound High Flow Filter Cartridges

HFPP series high flow string wound cartridges are designed for power station condensation water filtration.

View Specifications
Labelled schematic of the HFBH Bag Style High Flow Filter Cartridges showing construction and connection detail
High Flow Cartridges

HFBH Bag Style High Flow Filter Cartridges

HFBH is a 6 inch diameter high flow pleated bag style cartridge with a polypropylene media pack, an inner core, and an injection moulded outer cage.

View Specifications
Labelled schematic of the Liquid Filter Bags showing construction and connection detail
Filter Bags

Liquid Filter Bags

Liquid filter bags are available in felt and mesh materials.

View Specifications
Labelled schematic of the SQH Quick Open Multi Bag Filter Housings showing construction and connection detail
Filter Housings

SQH Quick Open Multi Bag Filter Housings

SQH is a quick open multi bag filter housing with a hand wheel operated closure that allows single hand operation and self-balancing open angles.

View Specifications
Typical Scenarios

Where The Cartridges Sit In The Line

Well Completion Fluid Filtration

Protecting downhole tools and formation integrity by removing particulates from completion fluids before injection.

Workover Fluid Polishing

Maintaining fluid cleanliness during well intervention to prevent equipment wear and formation plugging.

Injection Water Treatment

Ensuring clean water for reservoir injection to avoid scaling and permeability loss.

Produced Water Reuse

Preparing produced water for reinjection or discharge by removing suspended solids and oil.

How We Work

From Enquiry To Repeat Supply

Send The Duty

Provide housing model, current cartridge part number, fluid type, target micron rating, and flow rate.

We Cross Reference

Confirm the equivalent series, length, adapter, O-ring, and media against your installed housing.

Sample And Trial

Receive a sample set in the exact configuration to test differential pressure and run length under real conditions.

Production Supply

Repeat orders in the confirmed configuration with consistent carton marking for inventory tracking.

Delivery

What To Expect On Supply

  • Cartridges configured to the order code rather than picked from generic stock
  • Individually bagged and cartoned for export
  • Carton marking to your part number when you resell
  • WhatsApp thread kept per account so the configuration history is one message away
Related Guides

Reading For This Industry

High Flow Cartridges Compared With Standard 2.5 Inch Cartridges

Compare element count, footprint, change-out labour, and cost per cycle between 6 inch and 6.5 inch high flow cartridges and traditional 2.5 inch cartridges.

Read Guide

Matching Replacement Cartridges To Your Filter Housing

Find the right replacement cartridge by matching outer diameter, length, adapter, O-ring, and flow direction. We confirm fit based on your housing model and cur

Read Guide

How To Choose A Micron Rating For Cartridge Filters

Absolute versus nominal ratings, choosing from the stage you protect, and why rating drives change-out cost more than unit price.

Read Guide
FAQ

Oil And Gas Operations Filtration FAQ

Can you match the cartridge in my oilfield housing?
Send the housing model and the code printed on the cartridge you remove. We confirm diameter, length, adapter, and O-ring before quoting.
What micron rating should I use for injection water?
It depends on the downstream equipment and fluid composition. Tell us your current rating and feed type, and we will suggest a starting point.
Do you supply the housings as well?
Yes. We supply cartridge, bag, and high flow housings in stainless steel and plastic alongside the elements.
How do I trial before switching?
Order a sample set, log clean differential pressure and run length, then compare against your current element.
What information speeds up a quotation?
Housing model, cartridge code, quantity per year, and destination port.

Tell Us What Your Line Has To Protect

Send the duty, the housing model and the element you run today and we will come back with a configuration rather than a catalogue.

Chat on WhatsApp Email Us All Products