Home/Knowledge Center/Bag Filters Compared With Cartridge Filters
Comparison GuideBag Filters Compared With Cartridge Filters
Compare liquid filter bags and pleated bag cartridges. Learn when each is right for your process, and how they fit standard SBS swing bolt housings.
Use a liquid filter bag when handling high dirt loads, oily feeds, or where low cost per unit and fast change-out are priorities. Bags are ideal for bulk solids removal in pre-treatment stages like RO pretreatment, chemical processing, and paint lines.
- Filter bags handle high dirt loads with low pressure drop
- Bags are lower cost per unit than cartridges
- Use bags for coarse filtration where the next stage tolerates some particle carryover
- Bags are best in high flow, low pressure drop applications
Related product: Liquid Filter Bags
Choose a pleated bag style cartridge when you need longer service life, higher efficiency, or a sealed change-out without contaminant release. These cartridges fit existing bag housings and offer better retention than plain bags.
- Pleated bag cartridges last up to three times longer than plain bags
- Inside-out flow traps contaminants during change-out
- Higher filtration efficiency with consistent pore size
- Compatible with standard #1 and #2 bag housings
Related product: HFBH Bag Style High Flow Filter Cartridges
SBS swing bolt housings accept both plain bags and pleated bag cartridges. The housing design allows quick change-out and high pressure operation. The same housing can be used with either a bag or a cartridge if the dimensions match.
- SBS series housings accept #1, #2, #3, and #4 size bags
- Same housing can be used with plain bags or pleated bag cartridges
- Swing bolt closure enables fast, secure change-out
- Housings rated to 150 psi with NPT, BSP, or flanged connections
Related product: Pleated Bag High Flow Filter Cartridges
Material choice determines chemical and temperature resistance. PP and PE bags handle up to 80℃, nylon up to 180℃, and PTFE up to 260℃. Pleated bag cartridges use polypropylene and glass fiber media with a max temperature of 80℃.
- PP and PE bags: max 80℃
- NMO nylon bags: max 180℃
- PTFE bags: max 260℃
- Pleated bag cartridges: max 80℃
- All materials resist a broad range of chemicals
Related product: SBS Swing Bolt Bag Filter Housings
Cartridges Mentioned Above
Liquid Filter Bags
Liquid filter bags are available in felt and mesh materials.
View SpecificationsHFBH Bag Style High Flow Filter Cartridges
HFBH is a 6 inch diameter high flow pleated bag style cartridge with a polypropylene media pack, an inner core, and an injection moulded outer cage.
View SpecificationsPleated Bag High Flow Filter Cartridges
HFBH is a 6 inch diameter high flow pleated bag cartridge with a polypropylene and glass fiber media pack, an inner core, and a rigid polypropylene ou
View SpecificationsSBS Swing Bolt Bag Filter Housings
SBS series stainless steel swing bolt liquid bag filter housings are designed to accept single filter bags.
View SpecificationsQuestions On This Topic
Can I use a pleated bag cartridge in my existing SBS swing bolt housing?
What micron ratings are available for the pleated bag cartridges?
What materials are used in the pleated bag cartridges?
What is the maximum temperature for the pleated bag cartridges?
How do I get a sample to test a cartridge in my housing?
Still Deciding Between Two Options
Send your housing model, the fluid and what sits downstream. We will tell you which of the two we would fit and why.