Liquid filter cartridges and housings made in Jiangyan, Taizhou since 2009[email protected]+8618051183600
HomeAll ProductsHigh Flow Filter CartridgesPleated Filter CartridgesDepth Filter CartridgesCarbon Filter CartridgesFilter HousingsLiquid Filter BagsWater Treatment And RO SystemsFood And Beverage PlantsChemical And Coatings PlantsPharmaceutical And Life ScienceElectronics And SemiconductorOil And Gas OperationsOEM Cartridge Cross ReferenceRO Pretreatment FiltrationReducing Cartridge Change-Out CostSanitary And Corrosive Duty FiltrationKnowledge CenterDownloadsAboutContact
Large diameter high flow filter cartridge with moulded handle

Home/Knowledge Center/High Flow Cartridges Compared With Standard 2.5 Inch Cartridges

Comparison Guide

High Flow Cartridges Compared With Standard 2.5 Inch Cartridges

Compare element count, footprint, change-out labour, and cost per cycle between 6 inch and 6.5 inch high flow cartridges and traditional 2.5 inch cartridges.

Replacing multiple 2.5 inch cartridges with one 6 inch or 6.5 inch high flow element reduces the number of elements in a housing, lowers the footprint, and simplifies change-out. The larger diameter provides more filtration area in a single unit.

  • A single 6 inch or 6.5 inch high flow cartridge replaces multiple 2.5 inch elements
  • Less space is needed for housing arrays or skid-mounted systems
  • Fewer elements mean less change-out labour per cycle

Related product: HFMV Series High Flow Filter Cartridges

The larger filtration area in 6 inch and 6.5 inch high flow cartridges reduces differential pressure rise during operation, extending the run time and reducing the frequency of change-outs. This lowers the total cost per cycle when labour and downtime are included.

  • Higher dirt holding capacity delays change-out
  • Lower differential pressure rise extends service life
  • Compare total cost per cycle, not unit price
Large diameter high flow filter cartridge with moulded handle
Large diameter high flow filter cartridge with moulded handle

Related product: HFPK Series High Flow Filter Cartridges

The HFMV, HFPK, and HFPL series are designed as dimensional equivalents to common 2.5 inch cartridge housings. They fit in the same housing envelope, allowing direct replacement without system modification.

  • HFMV: 6.5 inch diameter, lengths 10”, 20”, 40”, 60”
  • HFPK: 6 inch diameter, lengths 40”, 60”
  • HFPL: 6 inch diameter, lengths 10”, 20”, 40”, 60”
  • Send us your housing model and we will confirm compatibility

Related product: HFPL Series High Flow Filter Cartridges

All high flow series offer micron ratings from 1 to 100, with media and o-ring options to match process conditions. The HFPK and HFMV series use polypropylene media and polypropylene core. The HFPL series uses polypropylene and fiberglass media.

  • Micron ratings: 1, 3, 5, 10, 20, 25, 50, 100
  • O-rings: EPDM, Viton, Buna, Silicone
  • HFPL series supports higher temperature with fiberglass media

Related product: PP Pleated Filter Cartridges

Products In This Guide

Cartridges Mentioned Above

Large diameter high flow filter cartridge with moulded handle
High Flow Cartridges

HFMV Series High Flow Filter Cartridges

HFMV is a 6.5 inch large diameter high flow cartridge with a vertically pleated polypropylene pack, an inner core and an injection moulded outer cage.

View Specifications
Labelled schematic of the HFPK Series High Flow Filter Cartridges showing construction and connection detail
High Flow Cartridges

HFPK Series High Flow Filter Cartridges

HFPK is a 6 inch large diameter high flow cartridge with a pleated polypropylene media pack, an inner core and an injection moulded outer cage.

View Specifications
Labelled schematic of the HFPL Series High Flow Filter Cartridges showing construction and connection detail
High Flow Cartridges

HFPL Series High Flow Filter Cartridges

HFPL is a 6 inch large diameter high flow cartridge with a vertically pleated polypropylene and fiberglass media pack, an inner core and an injection

View Specifications
Labelled schematic of the PP Pleated Filter Cartridges showing construction and connection detail
Pleated Cartridges

PP Pleated Filter Cartridges

PP pleated filter cartridges are depth pleated cartridges with a single piece full length polypropylene media pack, an inner core, and an injection mo

View Specifications
FAQ

Questions On This Topic

Can I replace a 2.5 inch cartridge with a 6 inch high flow element?
Yes, if the housing envelope matches. Send us the housing model and we will confirm which high flow series fits.
What micron ratings are available in the high flow series?
All series offer 1, 3, 5, 10, 20, 25, 50, and 100 micron ratings.
What materials are used in the high flow cartridges?
HFMV and HFPK use polypropylene media and polypropylene core. HFPL uses polypropylene and fiberglass media.
What is the maximum temperature these cartridges can handle?
Polypropylene series: 80℃. HFPL series with fiberglass media: up to 130℃.
Can I get a sample to test in my housing?
Yes. Message us with the housing model, the current cartridge code, and the rating you want to test.

Still Deciding Between Two Options

Send your housing model, the fluid and what sits downstream. We will tell you which of the two we would fit and why.

Chat on WhatsApp Email Us More Guides