Replacement Filter Cartridges That Fit The Housings You Already Own
High flow, pleated, depth, carbon and bag elements built to the installed OEM envelopes, made in Jiangyan, Taizhou and shipped to more than 50 countries.
One Large Element Instead Of A Bank Of Small Cartridges
Six inch and 6.5 inch high flow series cut the piece count on a large skid, which is where change-out labour actually goes.
Media Chosen For The Fluid Not For The Price List
PTFE membrane with PFA hardware for aggressive acids and solvents, and pleated polypropylene where polypropylene is the right answer.
- Built to the installed OEM dimensional envelopes
- Six ranges from prefiltration to final polishing
- Configuration recorded so reorders repeat the trial
- WhatsApp and email only, no forms to fill in
Six Ranges Covering Prefiltration Through To Final Polishing
Every element we make is built to drop into a housing that already exists on somebody's skid. That constraint shapes the whole range: fixed diameters, fixed lengths, published adapter styles and a choice of elastomer rather than one default.
High Flow Filter Cartridges
Large diameter pleated elements that replace banks of small cartridges in existing housings, reducing skid footprint and change-out time.
Explore RangePleated Filter Cartridges
Pleated filter cartridges that deliver fine and absolute rated filtration with durable construction and direct fit into common OEM housings.
Explore Range
Depth Filter Cartridges
Coarse to medium sediment filtration for pre-treatment lines using melt blown and string wound depth cartridges with backwash capability and durable construction.
Explore Range
Carbon Filter Cartridges
Activated carbon cartridges that remove chlorine, taste, odor and organics from liquid streams using coconut shell, nut shell or acid washed coal media with iodine values up to 1000.
Explore Range
Filter Housings
Stainless steel and plastic filter housings that fit existing systems and support standard cartridge and bag sizes for industrial liquid filtration.
Explore Range
Liquid Filter Bags
Coarse high throughput filtration in bag housings using felt and mesh bags with high dirt holding capacity and broad chemical resistance.
Explore RangeFilter Cartridges And Housings Buyers Ask For Most
The series buyers ask for by name, usually because they are replacing an OEM element and need the same envelope at a lower landed cost.
HFMV Series High Flow Filter Cartridges
HFMV is a 6.5 inch large diameter high flow cartridge with a vertically pleated polypropylene pack, an inner core and an injection moulded outer cage.
View SpecificationsPFA Fluoropolymer Membrane Filter Cartridges
PFA Fluoropolymer Membrane Filter Cartridges use expanded PTFE membranes with PFA core, cage, and end caps.
View Specifications
SPP Series Depth Pleated Filter Cartridges
SPP series depth pleated filter cartridges are constructed with a single piece full length polypropylene media pack, an inner core and an injection mo
View SpecificationsPP Melt Blown Depth Filter Cartridges
PP Melt Blown Depth Filter Cartridges are made from polypropylene fibers spun into a three dimensional network that captures particles throughout the
View Specifications
Activated Carbon Filter Cartridges
Activated carbon filter cartridges remove chlorine, taste, odor and organic contaminants from liquid streams.
View Specifications
SCC Clamp Cartridge Filter Housings
SCC series stainless steel cartridge filter housings feature a V band clamp closure for quick and easy cartridge change-out in commercial and light in
View Specifications
Liquid Filter Bags
Liquid filter bags are available in felt and mesh materials.
View Specifications
SS 304 and 316L Lenticular Filter Housings
SS 304 and 316L Lenticular Filter Housings are constructed with SS316L for the lenticular filter elements and SS304 for the legs and clamp.
View SpecificationsPlants That Cannot Afford A Filtration Surprise
Our buyers are rarely buying filtration for its own sake. They are protecting a membrane rack, a bottling line, a plating bath or a well, and the cartridge is the cheapest part of that chain.
Water Treatment And RO Systems
Water treatment plants and RO system integrators need cartridges that fit existing housings, maintain a consistent micron rating, and arrive.
See Filtration DutyFood And Beverage Plants
Food and beverage plants use filtration to protect downstream processes from particulates, chlorine, taste, and odour.
See Filtration Duty
Chemical And Coatings Plants
Chemical and coatings plants need filter cartridges that resist aggressive acids, bases, solvents and coatings without degrading.
See Filtration DutyPharmaceutical And Life Science
Pharmaceutical process engineers filter purified water loops, buffers and intermediates using sanitary housings with clamp closures and low .
See Filtration Duty
Electronics And Semiconductor
Electronics and semiconductor plants filter process water, ultrapure water loops and aggressive wet chemistry, where extractables from the c.
See Filtration Duty
Oil And Gas Operations
Oil and gas operations filter completion fluids, workover fluids, injection water, polishing brines and produced water on well sites and in .
See Filtration DutyThe Three Things Buyers Call Us About
The OEM Element Costs Too Much
Replacement elements from the original vendor carry a long lead time and a price the plant cannot keep absorbing every cycle.
How we handle it: We build to the same dimensional envelopes, so the vessel stays and only the element supplier changes.
Change-Out Eats A Whole Shift
A skid full of small cartridges takes two people most of a day to change, and that labour dwarfs the cartridge bill.
How we handle it: Large diameter high flow elements carry the same flow through far fewer pieces.
The Run Ends Earlier Than Planned
Differential pressure climbs faster than expected and the filter train comes offline before the maintenance window.
How we handle it: We work back from the stage you are protecting and stage a coarse element ahead of the fine one where the feed needs it.
What We Can Actually Evidence
We publish the figures we can stand behind and leave out the ones we cannot. If a specification you need is not on this site, it is because it is not published, not because we are holding it back.
Built To The Installed Envelope
Diameters, lengths and adapter styles follow the common OEM series so the element drops into the vessel you already own.
Six Ranges Under One Account
High flow, pleated, depth, carbon, bags and housings, so one supplier covers prefiltration through to final polishing.
Configured Not Substituted
Micron rating, elastomer and adapter are set to your duty and recorded, so a reorder repeats the trial instead of restarting it.
Export Since 2009
Over 1,000 customers across more than 50 countries, with more than 200 of them buying from us for over a decade.
Filtration Problems We Are Asked To Solve
Four situations that come up in almost every enquiry, and how we work through each one.
OEM Cartridge Cross Reference
You keep the vessels already bolted to the skid and we match the element that goes inside them.
Read SolutionRO Pretreatment Filtration
Cartridge selection and staging ahead of reverse osmosis, sized so the run ends when you planned it to.
Read SolutionReducing Cartridge Change-Out Cost
Fewer elements, longer runs and a change-out trigger based on differential pressure rather than the calendar.
Read SolutionSanitary And Corrosive Duty Filtration
Cartridge and housing material selection for sanitary lines and for acids solvents and coatings.
Read SolutionSelection Guides For Filtration Buyers
How To Choose A Micron Rating For Cartridge Filters
Absolute versus nominal ratings, choosing from the stage you protect, and why rating drives change-out cost more than unit price.
Read GuideHigh Flow Cartridges Compared With Standard 2.5 Inch Cartridges
Compare element count, footprint, change-out labour, and cost per cycle between 6 inch and 6.5 inch high flow cartridges and traditional 2.5 inch cartridges.
Read GuideO-Ring Material Selection For Filter Cartridges
Choose EPDM, Viton, Buna, or Silicone o-rings based on fluid and temperature. All rated up to 80℃. Avoid mismatched materials to prevent failure.
Read GuideQuestions Buyers Ask Before Ordering
Can you match the cartridge my plant buys today?
Do I have to change my filter housings?
Are you an authorised distributor for the OEM brands you mention?
Can I trial before committing to volume?
Which certifications do you hold?
How do I get a quotation quickly?
Send Us The Element You Are Replacing
A photograph of the end cap and label is usually enough for us to identify the series and quote an equivalent that fits your existing housing.