GC-1002 Handheld Security Metal Detector
The GC-1002 needs no adjustment at all, and its detection distance holds steady as the 9 V battery drops from 9 V to about 7 V, which is what stops performance quietly degrading through a shift. It runs 20 kHz with sound and vibration alarms, works about 40 hours continuously, and weighs 450 g at 417 x 87 x 41 mm.
Key benefits
- No adjustment required, nothing for an operator to set wrong
- Detection distance holds steady as the battery falls from 9 V to about 7 V
- About 40 hours of continuous work on low power consumption
- Automatic continuous alarm when the battery is exhausted
- External rechargeable socket and hand-off switch for audio, light and vibration
Problems it solves
- Detection quietly weakens as a battery drains on cheaper wands
- Adjustable wands are left on the wrong setting between shifts
- A dead battery goes unnoticed until a miss occurs
- Heavy wands are hard for older or less able staff to use
Who it is for
- Government departments screening at controlled entrances
- Public venues with rotating screening staff
- Operators who need a wand light enough for extended use
Application scenarios
- Courts, prisons, detention centres and public security bureaus
- Subways, high-speed rail, airports, railway and bus stations, ports
- Schools, gymnasiums and entertainment venues
- Exhibition halls, museums, banks, oil depots and power stations
Technical features
- Switch on and off audio prompt function
- External rechargeable socket hole
- Audio, light and vibration hand-off switch
- Low power consumption design
Specifications
| Model | GC-1002 |
|---|---|
| Dimension | 417 x 87 x 41 mm |
| Working Frequency | 20 kHz |
| Alarm Mode | Sound and vibration |
| Weight | 450 g |
| Power | Standard 9 V laminated alkaline battery |
| Continuous Working Time | approximately 40 hours |
| Battery Behaviour | detection distance unchanged from 9 V down to about 7 V; automatic continuous alarm when exhausted |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The V006E and PD-240 run far longer, up to 500 hours on a lithium pack, with three sensitivity levels. The GC-1002 is the no-adjustment wand at 450 g, and the one that warns you when the battery is finished rather than simply going quiet.
Use guide
- Fit a standard 9 V laminated alkaline battery, or use the external rechargeable socket
- Sweep without adjusting anything, no setup is required
- Use the hand-off switch to select audio, light or vibration alerting
- Replace the battery when the automatic continuous alarm sounds
- Expect about 40 hours of continuous working per battery
Where this product is used
Part of Handheld Security Metal Detector Wands ยท typically specified for:
GC-1002 Handheld Security Metal Detector FAQ
Does it need adjusting
No adjustment is required, which is the point of the design.
Does detection weaken as the battery drains
No. Detection distance is stated to stay unchanged as the battery voltage drops from 9 V to about 7 V.
How do I know the battery is finished
It gives an automatic continuous alarm when the battery is used up.
How long does it work continuously
About 40 hours.
How heavy is it
450 g, at 417 x 87 x 41 mm.
Can it be recharged
There is an external rechargeable socket hole.
Can you quote wholesale quantities
Yes. Send your quantity and destination on WhatsApp and we will come back with pricing.
Quotation for the GC-1002 Handheld Security Metal Detector
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.