Ultra-Thin Portable X-Ray Inspection System 120KV
The 12 mm panel is the point of this system. It slides into gaps a thicker detector cannot enter, with only a 7 mm bottom blind spot, and it is compatible with all X-ray sources on the market so it can be added to equipment a team already owns. Penetration is 200 mm of aluminium or 25 mm of steel at 60 to 120 kV.
Key benefits
- 12 mm ultra-thin panel fits into tight gaps
- 7 mm bottom blind spot, so little is lost at the panel edge
- Compatible with all X-ray sources on the market
- 200 mm aluminium or 25 mm steel penetration
- 3D imaging supported
Problems it solves
- A thick detector cannot be placed behind the target at all
- A large blind spot at the panel edge hides part of the item
- Panels tied to one source lock a team into one supplier
- Flat imaging misrepresents layered internal contents
Who it is for
- Units that already own a source and need a better panel
- Field teams working in confined or awkward geometry
- Operations where the panel placement, not the source, is the limit
Application scenarios
- Imaging behind panels and inside confined spaces
- Inspection under seats, in vehicle voids and inside furniture
- Teams adding a panel to an existing X-ray source
- Situations where a thicker detector cannot be placed at all
Technical features
- 12 mm panel thickness
- 2.5 Lp/mm resolution
- 3D imaging supported
- Source-agnostic compatibility
Specifications
| Voltage | 120 kV, 60 to 120 kV adjustable |
|---|---|
| Panel Size | 350 x 430 mm |
| Panel Thickness | 12 mm |
| Resolution | 2.5 Lp/mm |
| Bottom Blind Spot | 7 mm |
| Penetration | 200 mm aluminium or 25 mm steel |
| Imaging | 3D imaging supported |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The 125KV cloud system has a 5 mm blind spot and 42 mm steel penetration but is a complete platform. This 120KV system is the one to specify when the panel has to be thin enough to fit somewhere, and when it must work with a source you already have.
Use guide
- Slide the 12 mm panel into the gap behind the target
- Allow for the 7 mm bottom blind spot when positioning
- Set the source between 60 and 120 kV for the material
- Pair with an existing X-ray source if one is already in service
- Use 3D imaging where layered contents must be separated
Where this product is used
Part of Portable X-Ray Inspection Systems ยท typically specified for:
Ultra-Thin Portable X-Ray Inspection System 120KV FAQ
How thin is the panel
12 mm, with a 7 mm bottom blind spot.
Does it work with our existing X-ray source
It is described as compatible with all X-ray sources on the market. Send us your source model on WhatsApp to confirm.
What penetration does it reach
200 mm of aluminium or 25 mm of steel.
What resolution does it give
2.5 Lp/mm over a 350 x 430 mm panel.
Does it support 3D
Yes.
Which model has the smallest blind spot
The 125KV Smart Cloud system, at 5 mm.
Related products
Quotation for the Ultra-Thin Portable X-Ray Inspection System 120KV
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.