MD-300 Security Handheld Wand Scanner
The MD-300 uses a circular detection area rather than a flat blade, which is what gives it a consistent response from any approach angle. It runs at 20 kHz, detects a 40 mm diameter target and 10 mm copper or aluminium sheet, weighs 272 g including battery, and works about 40 hours from a single 9 V cell.
Key benefits
- Circular detection area giving consistent response from any angle
- 20 kHz operation with adjustable sensitivity
- 272 g including battery, light for extended screening
- About 40 hours normal working on one 9 V cell
- Audio, visual and vibration alerts plus a built-in LED flashlight
Problems it solves
- Flat detection blades respond differently depending on the sweep angle
- Audible alarms are disruptive in quiet or crowded areas
- A separate torch is needed for dark inspections
- Unexpected battery depletion stops screening mid-shift
Who it is for
- Operators screening at varying approach angles
- Sites needing discreet vibration alerting in quiet areas
- Teams inspecting dark spaces without a separate torch
Application scenarios
- Airports and government buildings
- Public events and high-security areas
- Scanning individuals, bags, parcels and objects
- Inspecting dark or hard-to-reach areas
Technical features
- Adjustable sensitivity settings
- Audio and visual alerts with a separate vibration mode
- Built-in LED flashlight
- Low battery indicator
- Buzzer and vibration motor indicators
- Rugged housing and sturdy components
Specifications
| Operating Frequency | 20 kHz |
|---|---|
| Weight | 272 g including battery |
| Length | 420 mm |
| Width | 138 mm |
| Height | 110 mm |
| Handle Measurement | 30 x 30 mm |
| Control | Manual |
| Indicators | Buzzer and vibration motor |
| Battery | 9 V, suitable for about 40 hours normal working |
| Detection, Diameter Target | 40 mm |
| Detection, Copper and Aluminium Sheet | 10 mm |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The MD-3003B1 has a flat blade and a 60-hour battery at 409 g. The MD-300 is lighter at 272 g with a circular detection head, which is the difference when operators sweep at varying angles.
Use guide
- Adjust sensitivity for the specific security requirement before the shift
- Sweep with the circular head, response is consistent from any angle
- Use vibration mode in quiet or crowded areas
- Switch on the LED flashlight for dark or hard-to-reach inspections
- Recharge or replace the battery when the low battery indicator shows
Where this product is used
Part of Handheld Security Metal Detector Wands ยท typically specified for:
MD-300 Security Handheld Wand Scanner FAQ
Why a circular detection area
It gives a consistent response regardless of the angle the operator approaches from.
What frequency does it run at
20 kHz.
How long does the battery last
About 40 hours of normal working from a 9 V battery.
How heavy is it
272 g including battery, at 420 x 138 x 110 mm.
Does it have a light
Yes, a built-in LED flashlight for inspecting dark or hard-to-reach areas.
Can it alert without sound
Yes, a vibration mode is included alongside audio and visual alerts.
What can it detect
A 40 mm diameter target and 10 mm copper or aluminium sheet, among other metal objects.
Quotation for the MD-300 Security Handheld Wand Scanner
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.