Multi-Zone Walk Through Metal Detector up to 90 Zones
This WTMD platform scales its zone count from 1 up to 90, so the same gate design covers a simple single-zone door and a high-resolution 90-zone checkpoint. It is built from an electronic control unit and two door panels carrying transmitting and receiving antennas, with LED light bars top to bottom inside both panels.
Key benefits
- Zone count configurable from 1 up to 90
- LED light bars inside both door panels, top to bottom
- Electronic control unit with variable magnetic field generator and signal processor
- Power saving and standby modes
- Supplied with a full installation and operating manual
Problems it solves
- One fixed zone count cannot cover every position on a site
- Gates installed side by side interfere without proper spacing
- Undocumented equipment is maintained inconsistently
- Coarse zone counts cannot locate a small item on the body
Who it is for
- Operators specifying different zone counts across a site
- Buyers who want the installation and maintenance procedure documented
- Sites installing more than one gate side by side
Application scenarios
- Checkpoints requiring precise location of a detected item
- Sites installing several gates side by side
- Projects where zone count must be specified per position
- Facilities that will train staff on documented procedures
Technical features
- Two door panels with pre-installed transmitting and receiving antennas
- Electronic control unit with variable magnetic field generators, receivers, signal processors and process controllers
- Multi-zone display with menu and program setting
- Power saving mode and standby mode
- Password-protected settings
Specifications
| Zone Configuration | 1 to 90 zones, including 8, 15, 16, 24, 30 and 45 zone variants |
|---|---|
| Construction | Two door panels plus main box with internal electronic control unit |
| Indication | LED light bars top to bottom inside both door panels |
| Power Adapter Input | AC 100 to 240 V |
| Power Adapter Output | 15 V DC, 5 A |
| Adapter Size | 114 x 50 x 30 mm |
| Cable Length | 2.5 m |
| Modes | Power saving and standby |
| Documentation | Full user manual covering installation, operation and maintenance |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Quality control
- Documented routine maintenance, storage conditions and after-service procedures
Customisation options
- Zone count specified from 1 to 90 for the position
Compared with other models in the range
The VM-45 fixes 45 zones with a 4095-level sensitivity scale and a touch screen host. This platform is the one to discuss when different positions on a site need different zone counts, anywhere from 1 to 90.
Use guide
- Choose the installation location and design the checkpoint before assembly
- Follow the manual's guidance when installing more than one gate side by side
- Raise sensitivity to detect smaller metal objects, lower it to reduce the alarm rate
- Use power saving and standby modes outside peak periods
- Keep passengers in queue, as the manual advises, for effective inspection
Where this product is used
Part of Multi-Zone Walk-Through Metal Detectors ยท typically specified for:
Multi-Zone Walk Through Metal Detector up to 90 Zones FAQ
How many zones can it have
From 1 up to 90, with 8, 15, 16, 24, 30 and 45 zone configurations among the options.
What does the system consist of
An electronic control unit and two door panels with pre-installed transmitting and receiving antennas, connected by cable.
What power supply does it use
A power adapter taking AC 100 to 240 V and outputting 15 V DC at 5 A, with a 2.5 m cable.
Does it save power when idle
Yes, it has power saving and standby modes.
Is a manual supplied
Yes, covering installation, operation, maintenance, storage and after service.
How does sensitivity relate to alarm rate
Raising sensitivity detects smaller metal objects but increases the alarm rate; the manual explains the trade-off.
Can several be installed side by side
Yes, the manual includes guidance for installing more than one WTMD side by side.
Quotation for the Multi-Zone Walk Through Metal Detector up to 90 Zones
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.