
PV800 Solar Pump Inverter
MPPT solar pump inverter for three phase AC and PMSM pumps, with dual DC and AC input.
View Product ›KEWO solar pump inverters are used in land irrigation, domestic water supply, fish farming, livestock, swimming pools, fountains, drip irrigation and sprinkler systems.

MPPT solar pump inverter for three phase AC and PMSM pumps, with dual DC and AC input.
View Product ›
Small size PV350 solar pump inverter for lower power solar pumping systems.
View Product ›
Outdoor rated IP65 solar pump inverter for installation next to the array with no extra enclosure.
View Product ›
SG320 solar pump drive with high MPPT efficiency, dry run protection and remote monitoring.
View Product ›
Mini format SG320 for small solar pumping systems from 0.75 kW to 3.7 kW.
View Product ›
SG100 low start voltage solar pump inverter for small single phase and three phase pumps.
View Product ›
SG600 series MPPT solar pump inverter from 0.3 kW upwards with dual supply operation.
View Product ›
SG200 series solar inverter with single phase output for single phase motors and pumps.
View Product ›
OEM outdoor cabinet with AC/DC switches, breaker and optional GPRS, water and dust proof.
View Product ›
Raises DC voltage from the PV array so a higher voltage inverter can still be used.
View Product ›
GPRS DTU wireless terminal for remote control and status monitoring of solar pump drives.
View Product ›
Matched DC solar pump sets supplied together with the drive as a complete system.
View Product ›
Mono crystalline and poly crystalline PV modules with TUV, IEC61215, IEC61730, CE and ROHS certification.
View Product ›
Three phase submersible well pumps matched to KEWO solar pump inverters.
View Product ›Choosing a model: size the unit to motor or pump current, not only to kW, and check the supply voltage and the enclosure rating the site needs. Send the nameplate data and we will confirm the model.
FAQ
No. The design philosophy is that it is more efficient to store water than electricity, so there is no storage battery in the system. The array feeds the inverter directly and water is stored in an elevated tank, water tower or reservoir.
Yes. The inverters operate in dual supply mode and accept either DC from the PV array or an AC supply, so the pump can still run when there is no sunlight. Only one supply is connected at a time.
Single and three phase AC induction pumps, and high efficiency permanent magnet synchronous motor pumps as an option. Centrifugal, axial flow, mixed flow and deep well pumps are all used, depending on the system demand and the installation.
You need the Voc, Vmp and power of the panel. Voc sets how many panels you can put in series into the inverter MPPT window, and Vmp is where the array actually delivers its power. There is a full explanation on our solar pumping system article.
Dry run or under load protection, water tank full detection, maximum pump current protection, low stop frequency protection, sleep and wake up on falling and rising sunlight, plus short circuit, phase missing, over current and over voltage protection.
Yes, with the GPRS DTU module. It gives remote start and stop and working status monitoring over the mobile network, anywhere a phone has coverage.
Send the model, the quantity and the supply voltage, or just describe the application and let an engineer pick the model.