
AC Drives And Frequency Inverters
General purpose and high performance vector control AC drives from 0.4 kW to 500 kW, for induction motors and permanent magnet synchronous motors.
8 products ›Shenzhen Kewo Electric Technology Co., Ltd.
KEWO manufactures vector control frequency inverters up to 500 kW, SD3000 medium voltage drives, MPPT solar pump inverters and motor soft starters for machine builders, panel builders, solar contractors and distributors worldwide.
What We Make
Everything below is designed and built by KEWO in Shenzhen. Pick the range that matches your application, or send us the motor data and we will size it for you.

General purpose and high performance vector control AC drives from 0.4 kW to 500 kW, for induction motors and permanent magnet synchronous motors.
8 products ›
SD3000 series medium voltage drives for 660 V, 1140 V and 3300 V motor systems.
1 products ›
MPPT solar pump inverters that take DC straight from a PV array and drive AC pumps directly, with no battery bank in the system.
14 products ›
Digital and online soft starters that cut starting current and mechanical shock on direct on line motor applications.
4 products ›
EMC filters, sine wave and dv/dt filters, AC and DC reactors, braking units and braking resistors to complete a drive installation.
10 products ›Popular Models

MPPT solar pump inverter for three phase AC and PMSM pumps, with dual DC and AC input.
View Product ›
High performance vector control drive with open loop and closed loop vector modes, torque control and wide speed range.
View Product ›
SG320 solar pump drive with high MPPT efficiency, dry run protection and remote monitoring.
View Product ›
Online soft starter with the bypass built in, so no external AC contactor is needed.
View Product ›
SD3000 series drive for 660 V, 1140 V and 3300 V motors on high power fan, pump and mining loads.
View Product ›
Small and smart current vector control drive for induction motors, with rich terminal functions and PG card option.
View Product ›
SG600 series MPPT solar pump inverter from 0.3 kW upwards with dual supply operation.
View Product ›
Sealed IP54 version of the SD350 and SD800 drive for dusty and humid installations.
View Product ›What Problem We Solve
Most enquiries start from a problem rather than a model number. These are the four we are asked about most.

Sites with no grid connection, or with a supply too weak and too expensive to run a pump on, still need water for irrigation, livestock and domestic supply.
Read The Solution ›
Fans, pumps and compressors that run direct on line at full speed waste energy whenever the process does not need full flow, and start with high inrush current that stresses the motor and the supply.
Read The Solution ›
An OEM building machines in volume needs a drive that fits the panel, holds torque at low speed, talks to the machine controller and can be bought at a stable price with a stable lead time.
Read The Solution ›Why Customers Choose Us
KEWO designs, develops, manufactures, sells and services its own drives. Two production lines, a digital quality control system, bar code tracking and ERP sit behind every unit.
Each piece of KEWO product is tested at full load with a motor before it leaves the factory. The manufacturing line has been ISO9001 approved since 2009.
All KEWO AC drives use Infineon IGBT modules. High end components are what keeps the failure rate low on drives that run continuously.
18 months free repair on AD100, AD350, AD800, AS850T and AS850Z. Free spare parts are supplied for in-warranty repair, and service engineers respond within 24 hours.
How We Work
Send the motor or pump data and the application.
An engineer sizes the drive to current, not just kW.
A sample can be supplied for testing on your machine.
Full load test, bar code tracking, packing.
Response within 24 hours, free in-warranty spares.
Inside The Factory
KEWO moved into its current factory in July 2015. There are two modern production lines, a digital quality control system, a bar code tracking system and an ERP management system. The AC drive assembly lines, the automated VFD test desks and the warehouse for 0.75 kW to 500 kW units are all shown on the factory page, photographed as they are.
Every drive is tested with a motor before it leaves the factory. All KEWO AC drives use Infineon IGBT modules.
See The Factory
FAQ
AC drives and frequency inverters from 0.4 kW to 500 kW, SD3000 medium voltage drives for 660 V, 1140 V and 3300 V systems, MPPT solar pump inverters, AC servo drives, motor soft starters and the peripheral equipment that goes with them — filters, reactors, braking units and resistors.
Machine builders and OEMs, panel builders and system integrators, solar EPC contractors, distributors, and end users in industrial automation, cement, textile, metallurgy, HVAC, oil and gas, water treatment, chemical, machine tools, hoisting, agriculture and irrigation.
It removes the need for a grid connection and for a battery bank. DC from the PV array is converted directly to AC to drive the pump, and output frequency tracks the available sunlight through MPPT. Water is stored in a tank rather than electricity in batteries.
The AD series is a high performance vector control inverter with open loop vector, closed loop vector and V/F modes and covers around 90 percent of industrial applications. Customers use it in place of Siemens, Schneider, ABB, Allen-Bradley and Emerson drives.
Yes. A sample is available for testing if you cover the freight cost and send back a test report. You are also welcome to visit the factory in Shenzhen to test in person.
Tell us the motor rating, the load type and the supply voltage and an engineer will come back with a model and a price. No form to fill in — WhatsApp or email is enough.