Precision Stainless Steel Strip
Austenitic and ferritic stainless strip in 200, 300 and 400 series, rolled down to 0.05 mm and slit from 5 mm to 1250 mm.
| Designation | Material | Temper | Surface | Thickness | Width |
|---|---|---|---|---|---|
| 200 series | 200 Series Precision Stainless Steel Strip | Annealed to full hard | 2B, BA, 2H | 0.05 - 1.0 mm | 5 - 1250 mm |
| 300 series | 300 Series Precision Stainless Steel Strip | Annealed to full hard | 2B, BA, 2H | 0.05 - 1.0 mm | 5 - 1250 mm |
| 400 series | 400 Series Precision Stainless Steel Strip | Annealed to full hard | 2B, BA, 2H | 0.05 - 1.0 mm | 5 - 1250 mm |
200 Series Precision Stainless Steel Strip
Manganese bearing austenitic stainless strip, 0.05 to 1.0 mm, slit 5 to 1250 mm.
View Specification
300 Series Precision Stainless Steel Strip
Austenitic stainless strip including 304 and 316 families, 0.05 to 1.0 mm, slit 5 to 1250 mm.
View Specification
400 Series Precision Stainless Steel Strip
Ferritic and martensitic stainless strip, 0.05 to 1.0 mm, slit 5 to 1250 mm.
View SpecificationCold Rolled Carbon Steel Strip
Drawing qualities DC01 to DC06 and high strength low alloy grades HSLA 260 to 550, from 0.05 mm thick and 5 mm wide.
| Designation | Material | Temper | Thickness | Width |
|---|---|---|---|---|
| DC01 - DC06 | DC01 to DC06 Cold Rolled Steel Strip | Annealed to full hard | 0.05 - 1.0 mm | 5 - 1500 mm |
| HSLA 260 - 550 | HSLA 260 to 550 Cold Rolled Steel Strip | Annealed | 0.40 - 1.0 mm | 5 - 1500 mm |
Hot Dipped Galvanized Steel Strip
Forming grades DX51D to DX56D and structural grades S260GD to S550GD, with zinc from 30 to 350 gram per square metre.
| Designation | Material | Temper | Zinc Weight | Thickness | Width |
|---|---|---|---|---|---|
| DX51D - DX56D | DX51D to DX56D Hot Dipped Galvanized Steel Strip | Annealed | 30 - 350 gram/m2 | 0.15 - 1.0 mm | 5 - 1500 mm |
| Construction steel S260GD - S550GD | S260GD to S550GD Structural Galvanized Steel Strip | Annealed | 30 - 350 gram/m2 | 0.40 - 1.0 mm | 5 - 1500 mm |
DX51D to DX56D Hot Dipped Galvanized Steel Strip
Forming grade galvanized strip, zinc 30 to 350 g/m2, 0.15 to 1.0 mm, slit 5 to 1500 mm.
View Specification
S260GD to S550GD Structural Galvanized Steel Strip
Structural galvanized strip, zinc 30 to 350 g/m2, 0.40 to 1.0 mm, slit 5 to 1500 mm.
View SpecificationAluminum Coil
Painted and anodized aluminum coil in 3000, 4000, 5000 and 6000 series, 0.15 to 1.0 mm thick and 5 to 1500 mm wide.
| Designation | Material | Quality Designation | Thickness | Width |
|---|---|---|---|---|
| Painted aluminum coil | Painted Aluminum Coil | 3000 series / 4000 series / 5000 series / 6000 series | 0.15 - 1.0 mm | 5 - 1500 mm |
| Anodized aluminum coil | Anodized Aluminum Coil | 3000 series / 4000 series / 5000 series / 6000 series | 0.15 - 1.0 mm | 5 - 1500 mm |
About This Range
Is every grade you supply listed on this page?
What if my requirement falls outside these ranges?
Why do stainless and carbon have different maximum widths?
Not Sure Which Grade Fits
Send the part and the process. Picking between DC06 and HSLA 340, or between 2B and BA, is a five minute conversation once we can see what the part has to do.