5 Products in This Range
Stainless Steel Spring Snap Hooks
Spring snap hooks are the fastest way to make a rope, chain or webbing connection that a person can open and close by hand. Honke forms them in 304 and 316 stainless steel from 4 mm to 20 mm and finishes them by polishing.
Who It Is For
Buyers This Range Was Built for
The trades below account for most of what leaves the plant in this category.
Problems It Solves
- Plated carbon hooks rust within a season on salt water and the buyer sends them back
- Gate springs lose tension after a few hundred cycles and the hook opens under load
- Mixed sizes arriving in one carton slow down the assembly line
Core Advantages
- 304 for general use and 316 for salt water so you can quote both grades from one supplier
- Polished finish that does not chip or flake like plating
- Eight standard diameters from 6 mm to 20 mm on the S2430 body alone
- Screw lock and eyelet variants for applications where the gate must stay shut
The Range
All 5 Spring Hooks Items
Spring HooksS2430304/316 Stainless Steel Spring Carabiner Snap Keychain Hook 6mm-20mm
View Details
Spring HooksS2450Stainless steel carabiner spring snap hook 4mm-14mm
View Details
Spring HooksS2450NHigh Quality Stainless Steel Screw Lock Snap Hooks with Nut Carabiner 4mm-14mm
View Details
Spring HooksS2450XHigh Quality Stainless Steel Spring Hook With Eyelet 4mm-14mm
View Details
Spring HooksS2470Stainless steel spring hook clasps stainless steel oval egg snap hook 40mm/50mm/70mm/100
View DetailsComparison
Spring Hooks Side by Side
Type material size and finish for every item in this category as supplied by the factory.
| Item | Type | Material | Size | Surface Finish |
|---|---|---|---|---|
| S2430 | Spring Snap Hook | stainless steel 304/316 | 6mm/8mm/10mm/12mm/14mm/16mm/18mm/20mm | Polishing |
| S2450 | Spring Hook | stainless steel, Steel Iron | 4mm-14mm | Polishing, plating, etc |
| S2450N | Spring Hook | stainless steel, Steel Iron | 4mm-14mm | Polishing, plating, etc |
| S2450X | Spring Hook | stainless steel, Steel Iron | 4mm-14mm | Polishing, plating, etc |
| S2470 | Spring Snap Hook | stainless steel 304/316 | 40mm/50mm/70mm/100mm | Polishing |
Application Scenarios
Where This Range Is Specified
Related Reading
Guides That Cover This Category
Material GuideStainless Steel 304 vs 316 for Rigging HardwareWhere the extra cost of 316 is worth paying and where it is not
Process GuideHow Rigging Hardware Is MadeFrom bar and wire to a finished polished fitting
Buying GuideHow to Choose a Snap Hook Swivel or Quick LinkMatching the connector style to how the joint is actually usedFAQ
Spring Hooks Questions Buyers Ask
What is the difference between 304 and 316 spring hooks
Both are austenitic stainless steels. 316 contains molybdenum, which makes it noticeably more resistant to chloride pitting, so it is the normal choice for sea water, coastal air and swimming pool areas. 304 is used for general indoor and inland outdoor work. Honke supplies both grades on the same part numbers.
Can you supply a spring hook with a locking gate
Yes. The S2450N carries a screw lock nut over the gate and the S2450X adds an eyelet so a lanyard or split ring can be attached. Both are listed in this category.
Are spring snap hooks load rated
The hooks in this range are connecting and holding hardware. Tell us the working load your market expects and we will confirm what we can supply and what documentation is possible for that item before you order.
What sizes do you keep
The S2430 runs 6, 8, 10, 12, 14, 16, 18 and 20 mm. The S2450 family runs 4 mm to 14 mm and the S2470 oval hook runs 40, 50, 70 and 100 mm overall length.
Can we get our own logo on the hook
Colour, marking and packaging are handled as OEM and ODM work. Send us the artwork and the part you want it applied to and we will come back on what the forming process allows.
Next Step
Get Spring Hooks Priced for Your Market
Send the item codes, quantities, material grade and finish. We will confirm what is possible and what the packing looks like.