3 Products in This Range
Stainless Steel Anchor Shackles
Shackles are the removable link between chain, rope and fixed hardware. Honke supplies bow, D and long D patterns to both US and European dimensions in stainless steel and carbon steel with a choice of finish.
Who It Is For
Buyers This Range Was Built for
The trades below account for most of what leaves the plant in this category.
Problems It Solves
- US and European dimensions are mixed in one shipment and pins do not interchange
- Galvanised carbon shackles stain the deck and the rope on a boat
- Pins seize after a season in salt air and cannot be released by hand
Core Advantages
- US and European patterns from the same factory so your catalogue stays consistent
- Stainless steel for marine work and carbon steel where price leads
- Polished, hot dip galvanised and zinc plated finishes
- Bow shackles for multi leg slings and D shackles for straight line pull
The Range
All 3 Anchor Shackles Items
Comparison
Anchor Shackles Side by Side
Type material size and finish for every item in this category as supplied by the factory.
| Item | Type | Material | Size | Surface Finish |
|---|---|---|---|---|
| S360 | D Type Anchor Shackle | Stainless steel, carbon steel | Custom size on request | Polishing, Hot Dipped Galvanized, Zinc-plated etc |
| S362 | Long D Type Anchor Shackle | Stainless steel, carbon steel | Custom size on request | Polishing, Hot Dipped Galvanized, Zinc-plated etc |
| S370 | Anchor Shackle | Stainless steel, carbon steel | Custom size on request | Polishing, Hot Dipped Galvanized, Zinc-plated etc |
Application Scenarios
Where This Range Is Specified
Related Reading
Guides That Cover This Category
Material GuideStainless Steel 304 vs 316 for Rigging HardwareWhere the extra cost of 316 is worth paying and where it is not
Material GuideSurface Finish Guide for Steel HardwarePolishing hot dip galvanising zinc plating and anodising compared
Process GuideHow Rigging Hardware Is MadeFrom bar and wire to a finished polished fittingFAQ
Anchor Shackles Questions Buyers Ask
What is the difference between a bow shackle and a D shackle
A bow shackle has a wide rounded body that can take load from several directions, which suits multi leg slings and mooring. A D shackle is narrow and is meant for straight line pull. A long D gives extra clearance in the same narrow shape.
Which finish should I choose
Polished stainless for boats and visible installations, hot dip galvanised carbon steel for outdoor and agricultural use, zinc plated where the part stays dry.
Are your shackles load rated and marked
Marking and rating vary by pattern and market. Tell us which standard your buyer works to and we will confirm what we can supply on that item before you place the order.
Can you supply captive pin or screw pin versions
Both pin styles are made. Confirm which one you need with the part code when you enquire.
What sizes are available
Shackle sizes on this range are made to order. Send the pin diameter and jaw width your market uses and we will quote against that.
Next Step
Get Anchor Shackles Priced for Your Market
Send the item codes, quantities, material grade and finish. We will confirm what is possible and what the packing looks like.