Lifting and Rigging hardware production at Honke Hardware

Industry Application

Components for Lifting and Rigging Assemblies

Eye bolts shackles swivels clips and thimbles for sling makers

Get a Custom Solution Download Catalog

Industry Pain Points

What Goes Wrong in This Trade

These are the complaints that come back down the chain and land on the importer.

Pain Points

  • Components arrive from several sources and finishes do not match inside one assembly
  • Threaded lifting points are loaded off axis because the wrong pattern was supplied
  • Wire rope eyes are made without thimbles and fail at the loop

What Buyers Need

  • DIN 580 eye bolts and DIN 582 eye nuts across the M6 to M24 range
  • Shackles, swivels, clips and thimbles from one plant so finishes agree
  • Stainless and carbon steel versions of the same part codes
  • Clear documentation expectations agreed before the order is placed

Typical Application Scenarios

Where the Parts Actually Sit

Machine and mould handling

DIN 580 eye bolts and DIN 582 eye nuts screwed into lifting points

Wire rope slings

Thimbles and DIN 741 or JIS clips forming the terminating eye

Chain assemblies

Quick links and shackles joining chain legs to the master link

Anti twist connections

Eye and jaw swivels relieving rotation between rope and load

Suitable Product Ranges

6 Ranges That Serve This Industry

6 productsEye Bolts and Screw Eye HooksDIN 580 eye bolts DIN 582 eye nuts and lag screw eyes from M6 to M243 productsAnchor ShacklesBow D and long D shackles in US and European patterns4 productsWire Rope Clips and ThimblesDIN 741 and JIS type clips with matching thimbles from 3 mm to 12 mm2 productsQuick LinksScrew gate chain connectors in oval and delta shapes from 3.5 mm to 14 mm10 productsSwivel Snap HooksBolt snaps trigger snaps and jaw end swivels that stop rope twist5 productsSpring HooksCarabiner and snap hooks in 304 and 316 stainless steel
S306 Lifting Eye Bolt DIN580 manufactured by Honke Hardware Eye Bolts and Screw Eye HooksS306Lifting Eye Bolt DIN580 View Details S3061 Lifting Eye Nut manufactured by Honke Hardware Eye Bolts and Screw Eye HooksS3061Lifting Eye Nut DIN582 View Details S360 D Type Anchor Shackle manufactured by Honke Hardware Anchor ShacklesS360High Quality US&European Type stainless steel D Type anchor shackle View Details S362 Long D Type Anchor Shackle manufactured by Honke Hardware Anchor ShacklesS362High Quality US&European Type stainless steel Long D Type anchor shackle View Details S234 Rope Thimble manufactured by Honke Hardware Wire Rope Clips and ThimblesS234Stainless Steel Light Duty Wire Rope Thimble View Details S2350 Rope Thimble manufactured by Honke Hardware Wire Rope Clips and ThimblesS2350High quality stainless steel wire rope clip and wire rope thimble and round thimble and View Details S7350 Quick Link manufactured by Honke Hardware Quick LinksS7350Rigging Hardware curt threaded quick link Stainless steel chain connecting link 3.5mm-14 View Details S7360 Delta Shape Quick Link manufactured by Honke Hardware Quick LinksS7360Delta shaped stainless steel chain quick connector link 3.5mm-12mm View Details

Solution Process

How an Order for This Trade Runs

The same route whether you are adjusting one dimension or bringing a new part into production.

1 Requirement Market and load 2 Drawing Or a sample 3 Material Grade and finish 4 Sample Free, freight prepaid 5 Production Longyan plant 6 Inspection Against the sample 7 Shipping Consolidated

Delivery Capability

What We Can Put Behind an Order

4,500 m²Plant floor area in Longyan Fujian
100People across forming machining finishing and assembly
61Catalogue items that can be mixed on one order
4Material families and four surface finishes

We publish what we can evidence. Certification, capacity and tolerance claims are confirmed against your specific item before an order rather than advertised in general.

Related Knowledge

Guides Worth Reading Before You Specify

Stainless Steel 304 vs 316 for Rigging Hardware Material GuideStainless Steel 304 vs 316 for Rigging HardwareWhere the extra cost of 316 is worth paying and where it is not Surface Finish Guide for Steel Hardware Material GuideSurface Finish Guide for Steel HardwarePolishing hot dip galvanising zinc plating and anodising compared How Rigging Hardware Is Made Process GuideHow Rigging Hardware Is MadeFrom bar and wire to a finished polished fitting How to Choose a Snap Hook Swivel or Quick Link Buying GuideHow to Choose a Snap Hook Swivel or Quick LinkMatching the connector style to how the joint is actually used

FAQ

Lifting and Rigging Questions

Are your parts load rated and marked

Rating and marking vary by pattern, material and destination market. Tell us the standard your buyer works to and we will confirm on that specific item what we can supply before you place the order.

Can you supply stainless and carbon versions of the same part

Yes. Most of the shackle, eye bolt, clip and thimble range is made in both stainless and carbon steel with a choice of polished, hot dip galvanised or zinc plated finish.

Do you make parts to our drawing

Yes, design work is handled as OEM and ODM. Send the drawing by WhatsApp or email and we will come back on feasibility and tooling.

Next Step

Build a Lifting and Rigging Programme with Us

Send your item list, target market and the material grade your customers expect. We will come back with a quotation and packing proposal.

Request a Quote Download Catalog
WhatsApp