Outdoor Lighting Simple Look LED Wall Lamp
The FD-IW060X10 is a 10W outdoor LED wall lamp designed for commercial office and architectural applications where a clean, minimal appearance is required. It features a slim profile with an aluminium body and glass cover, rated IP65 for protection against dust and water jets. The fixture operates on AC85-265V, making it compatible with standard building electrical systems. It uses a Philips LED chip and a Dark Energy driver, ensuring stable performance in outdoor environments. The lamp is available in white or black finish for integration into modern building facades.
| Model | FD-IW060X10 |
|---|---|
| Power | 10W |
| Input Voltage | AC85-265V |
| IP Rating | IP65 |
| Dimension | 125 x 1221 x 63 mm |
| Material | Aluminium+Glass |
| LED Chip | Philip |
| Driver | Dark Energy |
| Finish | White/Black |
| Warranty | 3 Years |
Key Benefits
- Slim 125mm depth allows flush mounting on walls with minimal projection
- IP65 rating protects against water jets and dust ingress in exposed outdoor locations
- AC85-265V input supports standard building voltage without need for step-down transformers
- Philips LED chip provides consistent light output and long life in outdoor conditions
- Dark Energy driver ensures stable operation under varying voltage conditions
- White or black finish options match modern architectural finishes without visible fasteners
Application Scenarios
- Mounting along the exterior of office buildings for uniform facade lighting
- Installing on corridor walls in commercial complexes with limited space for fixtures
- Lighting entryways and access points in mixed-use developments with a clean aesthetic
- Integrating into modern architectural designs where minimal visual impact is required
Who It Is For
- Commercial office building contractors specifying wall-mounted lighting
- Architectural lighting designers seeking a simple, low-profile outdoor fixture
- Electrical wholesalers supplying outdoor lighting for office and public buildings
- Brand owners sourcing OEM wall lamps under their own label for commercial projects
Problems It Solves
- Bulkier wall lamps require more space and create visual clutter on narrow walls
- Low IP-rated fixtures fail in outdoor areas exposed to rain and wind
- Voltage fluctuations in building wiring can cause flickering or early driver failure
- Visible mounting hardware or mismatched finishes disrupt the clean look of modern architecture
- Lack of standardised input voltage requires additional power conversion equipment
Technical Features
- Slim 125mm depth for flush mounting with minimal wall projection
- IP65 rating for protection against water jets and dust in outdoor environments
- AC85-265V input compatible with standard building electrical systems
- Philips LED chip for consistent light output and reliability
- Dark Energy driver for stable performance under variable input voltage
- Aluminium body with glass cover for heat dissipation and optical clarity
Materials
- Aluminium body for heat dissipation and structural rigidity
- Tempered glass cover for optical clarity and impact resistance
- Anodised aluminium finish for corrosion resistance in outdoor exposure
- Sealing gasket to maintain IP65 rating under environmental stress
Manufacturing Process
- Aluminium body extrusion and surface treatment
- Glass cover cutting and edge polishing
- LED board assembly with Philips chips and Dark Energy driver
- Sealing and gasket fitting to achieve IP65 rating
- Final inspection and powered testing before packing
Quality Control
- Incoming inspection of Philips LED chips and Dark Energy drivers
- IP65 sealing test using water spray and dust exposure
- Powered ageing test under normal operating conditions
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Available in white or black finish to match project finishes
- Driver can be supplied with the fixture or omitted when centralised drivers are used
- OEM and ODM production available for buyers selling under their own brand
Compared With the Alternatives
Standard wall-mounted LED fixture with plastic housing
Higher durability and better heat dissipation, but higher cost due to aluminium and glass materials
Wall lamp with lower IP rating
IP65 provides protection against water jets, suitable for exposed outdoor locations where lower ratings would fail
Fixture with fixed beam angle
No beam angle adjustment, but simpler design and lower cost for fixed lighting needs
Use Guide
- Mount the fixture on a solid wall with appropriate fasteners to support the weight
- Ensure the mounting surface is clean and dry before installing the fixture
- Connect to AC85-265V supply; no additional voltage conversion required
- Avoid direct exposure to high-pressure water jets during cleaning
- Clean the glass cover periodically with a soft cloth and mild detergent to maintain output
Outdoor Lighting Simple Look LED Wall Lamp Questions
What is the input voltage range for this wall lamp?
The fixture operates on AC85-265V, which covers standard building electrical systems.
Is the driver included?
Yes, the Dark Energy driver is included. It can also be supplied without the driver if centralised drivers are used.
What does IP65 mean for outdoor use?
IP65 means the fixture is protected against dust and water jets from any direction, suitable for outdoor wall mounting.
Can I get a sample before placing a bulk order?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship within 3-5 days.
How long does mass production take?
Mass production typically takes 1-2 weeks, with shipping via DHL, UPS, FedEx or TNT taking 3-5 days in transit.
What is the warranty period?
This model carries a 3-year warranty. Across the FENGDIAN range, the warranty is 2 to 5 years depending on the product.
Can I have my logo printed on the fixture?
Yes. Customer logo printing is available, and the design is confirmed against an approved sample before production begins.
Related Products
Remote Controller RGB DC24V LED Strip Light
View Specification
30W 10 Heads Ceiling Recess Office Linear Light
View Specification
Cheap 12W Acrylic D230mm LED Ceiling Light
View Specification
DC24V Silicone LED Strip Light
View Specification
Wholesale COB Chip DC24V LED Strip Light
View Specification
Foldable LED Surface Down Light 7W
View SpecificationRelated Guides
Request a Quotation for Outdoor Lighting Simple Look LED Wall Lamp
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.