Timber Cutting and Board Joining Line
CRATOOLS builds timber cutting and board joining lines using its own machines and saw blades. The line processes logs, round wood, square timber and panels through cutting, resawing, jointing and finger joining. These machines are used by sawmills and wood board plants in China and overseas, with in-house blade...
The Short Version
CRATOOLS builds timber cutting and board joining lines using its own machines and saw blades. The line processes logs, round wood, square timber and panels through cutting, resawing, jointing and finger joining. These machines are used by sawmills and wood board plants in China and overseas, with in-house blade production ensuring consistent tooling across the line.
Where It Goes Wrong
- Manual log breaking and resawing lead to inconsistent board thickness and high labour input
- Frequent blade changes and poor edge quality reduce throughput and increase waste
- Jointing and finger joining done by hand or with mismatched machines cause gaps and weak joints
- Separate suppliers for machines and blades mean no alignment in tooth geometry or feed rate
- Lack of automated blade maintenance leads to dull blades and inconsistent cuts
What Buyers Need
- A machine line that handles logs, round wood and square timber in sequence
- Saw blades that match the machine's tooth pitch and kerf width
- Automated jointing and finger joining with consistent pressure and alignment
- Blade maintenance machines that keep cutting edges sharp without stopping production
- English interface and operation manuals for setup and troubleshooting
Typical Situations
- A sawmill upgrading from manual log breaking to a full hydraulic line with 300E and 280E cutters
- A board plant adding a 3060D multichip resaw to increase panel output and reduce waste
- A wood processor integrating CYMJ-3 heat pressing jointers to improve edge quality on 18 mm boards
- A finger jointing line replacing semi automatic 1825A machines with 2480 full automatic units
- A plant adding 025A blade grinding and 8160B edge cutting to maintain blade sharpness between shifts
How The Work Runs
Step 1
Logs and round wood fed into 300E hydraulic round wood cutter or 200E chain multi dip log cutter
Step 2
Square timber resawn on 1528, 3060D or 3060H multichip machines with adjustable kerf
Step 3
Panels cut on 300 round wood table saw or 200 semi circle side panel saw
Step 4
Stock broken down on 250 horizontal belt band saw for smaller pieces
Step 5
Boards jointed on CYMJ-2 or CYMJ-3 heat pressing jointing machines
Step 6
Battens finger jointed on 2480 full automatic or 1825A semi automatic tenno connecting machines
Step 7
Saw blades maintained on 025A full automatic grinding machine and 8160B infrared edge cutting machine
Products For This Work
Wood Edge Banding Buffs
View Details
025A Full Automatic Saw Blade Grinding Machine
View Details
CYMJ-2 1 Wood Panel Heat Pressing Jointing Machine
View Details
CYMJ-3 2 Wood Panel Heat Pressing Jointing Machine
View Details
2480 Full Automatic Wood Pieces Tenno Connecting Machine
View Details
1825A Semi Automatic Wood Batten Tenno Connecting Machine
View Details
8160B Infrared Edge Saw Blade Edge Cutting Machine
View Details
200 Semi Circle Side Panel Saw Blade Wood Working Machine
View DetailsDelivery And Terms
- 5 to 15 workdays from stock, 15 to 60 workdays made to order depending on quantity and model
- Free sample testing on the buyer's own wood, buyer covers freight
- 100% in advance up to 10000 USD, 30% T/T deposit above that with balance before shipment
- Installation and operation training with lifetime free consulting
- After sales feedback within 0 to 24 hours
Timber Cutting and Board Joining Line FAQ
Can you supply a full timber cutting line with blades included?
Yes. The line can be quoted with CRATOOLS machines and matching saw blades for each machine.
Do your saw blades fit standard machines from other brands?
Our blades are designed for CRATOOLS machines. We can check compatibility if you provide the machine model and blade mounting dimensions.
What is the output capacity of the 3060D multichip machine?
The 3060D is rated for up to 1500 board feet per hour, depending on wood species and thickness.
Can the 2480 finger jointer run on 110 V?
Standard voltage is 380 V three phase four wire. Custom voltage is available upon request.
How often should the 025A blade grinder be used?
Grinding frequency depends on wood hardness and daily usage. Most users run it every 8 to 12 hours.
What wood types do your machines handle best?
The machines are designed for softwood, hardwood, and engineered wood. Feed rate and blade settings must be adjusted per material.
How do we get a quotation for a full line?
Send the wood types, board sizes, monthly volume and desired machines via WhatsApp or email. We quote the full line with blades.
Related Pages
Airway Buff Production Line
A full ventilated airway buff line from fabric roll to finished wheel. The process starts with bias cutting, slitting...
Corrugated and Weave Buff Line
Corrugated and weave buffs are formed on the CRA-360 automatic forming machine using cotton, treated cotton or sisal...
Pleated and Sewn Buff Line
Pleated and sewn buffs are produced using a fold and stitch machine with a fabric feed rack, followed by a roll glue...
Buff Raw Material Supply
CRATOOLS supplies raw materials for buffing wheel production from the Qingyuan buffing polish materials production...
Get A Machine List For Timber Cutting and Board Joining Line
Describe the product you need to finish or cut, the volume and the space you have. We come back with the equipment list and the consumables it runs on.