2480 Full Automatic Wood Pieces Tenno Connecting Machine
The 2480 Full Automatic Wood Pieces Tenno Connecting Machine joins wood laths into longer battens using a hydraulic clamping and connecting system. It handles laths up to 2500 mm in length, 100 mm in width and 40 mm in height. The machine produces 10 to 16 connected battens per minute with...
Product Overview
The 2480 Full Automatic Wood Pieces Tenno Connecting Machine joins wood laths into longer battens using a hydraulic clamping and connecting system. It handles laths up to 2500 mm in length, 100 mm in width and 40 mm in height. The machine produces 10 to 16 connected battens per minute with consistent joint strength and smooth finish. It operates safely and stably with a working pressure of 0.6 MPa and a maximum connecting pressure of 5000 kg. This machine is part of a timber wood processing line, used after sawing and before final shaping or assembly.
Key Benefits
- Replaces manual lath joining with consistent, repeatable connections
- Produces 10 to 16 connected battens per minute, increasing throughput
- Hydraulic system ensures even pressure and stable operation
- Handles laths up to 2500 mm in length and 40 mm in height
- High precision joints reduce waste and rework in downstream processes
- Safe and stable operation with fixed pressure settings and mechanical guards
Application Scenarios
- A wood board plant automating the joining of short laths into longer battens for panel production
- A sawmill adding a finishing step to prepare laths for furniture or construction framing
- A factory replacing hand clamping and glue application with a fully automatic connection process
- A production line needing consistent joint quality to reduce edge gaps in laminated wood products
Who It Is For
- Sawmills and wood board plants
- Timber processing factories producing laminated or composite wood panels
- Furniture manufacturers using joined laths for frames or structural parts
- Wood product makers requiring high-volume, repeatable jointing
Problems It Solves
- Manual lath joining leads to inconsistent pressure, weak joints, and variable alignment
- Hand assembly limits output to fewer than 10 battens per minute
- Inconsistent joint quality causes gaps or warping in final products
- Manual glue application is messy, slow, and hard to control for uniform bonding
- Lack of automation increases labor cost and operator fatigue on long shifts
Technical Features
- Hydraulic clamping system with adjustable pressure up to 5000 kg
- Single control panel with pressure gauge and start/stop functions
- Saw shaft speed set at 2800 rpm for clean, fast cutting of lath ends
- Feeding speed up to 25 meters per minute for continuous operation
- Working pressure maintained at 0.6 MPa for stable performance
- Integrated tenon cutting and joining mechanism in one cycle
Specifications
| Model | 2480 Full Automatic Wood Pieces Tenno Connecting Machine |
|---|---|
| Max Batten Length | 2500 mm |
| Max Batten Width | 100 mm |
| Max Batten Height | 40 mm |
| Saw Blade Diameter | 300 mm |
| Saw Shaft Speed | 2800 r/min |
| Feeding Speed | 25 M/Min |
| Working Pressure | 0.6 MPa |
| Max Connect Pressure | 5000 KG |
| Motor Power | 6.6 KW |
| Net Weight | 1200 KG |
| Overall Size | 5200*800*1500 MM |
| Production Rate | 10-16 PCS per minute |
Values taken from the manufacturer data for this model. Anything not listed is confirmed on request before order.
Materials
- Wood laths with straight, flat ends
- Hardwood or softwood laths used in panel or frame construction
- Glue or adhesive applied before connection (buyer supplies)
- Tenon cutters and guide rails for precise joint alignment
Manufacturing And Process
Step 1
Feed individual wood laths into the machine at the specified feeding speed
Step 2
The machine automatically aligns the lath ends and cuts the tenon profile
Step 3
Hydraulic clamps hold the laths together under 5000 kg pressure
Step 4
The joint is pressed and secured in one cycle
Step 5
The connected batten exits the machine and moves to the next stage
Step 6
Repeat for continuous production with minimal operator input
Quality Control
- Hydraulic pressure maintained at 0.6 MPa during operation to ensure consistent joint strength
- Sample joints tested before shipment to verify alignment and pressure
- Free sample testing available on buyer’s own laths and glue before purchase
- Installation and operation training provided to ensure correct setup and safety
Customization Options
- Voltage and phase configured for the destination market
- Adjustable clamping pressure settings for different wood types
- Tenon cutter profiles can be changed to match specific joint designs
- Machine can be quoted as part of a larger timber wood processing line
Compared With The Alternatives
| Manual lath joining with hand clamps and glue | Manual joining is slower, inconsistent, and requires more labor; this machine produces 10-16 battens per minute with uniform pressure |
|---|---|
| Semi-automatic tenno connecting machine | This model is fully automatic with integrated feeding and pressing; semi-automatic requires more operator intervention per cycle |
| CRA-2000 Timber Wood Cutting Machine | The CRA-2000 cuts raw wood to length; this machine joins pre-cut laths, so they serve different steps in the production line |
Use Guide
- Ensure all laths have flat, straight ends before feeding to avoid misalignment
- Set the clamping pressure to match the wood density and glue type
- Keep the saw blade sharp and clean to prevent splintering or uneven tenon cuts
- Monitor the feeding speed to avoid overloading the machine at 25 M/Min
- Contact us on WhatsApp for the English operation video if the operator is new
2480 Full Automatic Wood Pieces Tenno Connecting Machine FAQ
What is the maximum length of batten this machine can produce?
Up to 2500 mm in length.
How many battens can it produce per minute?
Between 10 and 16 pieces per minute, depending on lath size and joint type.
What voltage does the machine use?
380 V three phase four wire, customisable for other markets.
Do I need to supply glue for the joints?
Yes, the machine applies pressure but does not supply adhesive; glue is provided by the buyer.
What is the lead time for delivery?
5 to 15 workdays if in stock, otherwise 15 to 60 workdays depending on quantity and model.
What are the payment terms?
Orders up to 10000 USD are 100% in advance. Above 10000 USD it is 30% T/T deposit with the balance before shipment.
Can you test my own laths before I buy?
Yes, free sample testing is available. You cover freight and send the specific material you plan to run.
Related Products
025A Full Automatic Saw Blade Grinding Machine
View Details
CYMJ-2 1 Wood Panel Heat Pressing Jointing Machine
View Details
CYMJ-3 2 Wood Panel Heat Pressing Jointing Machine
View Details
1825A Semi Automatic Wood Batten Tenno Connecting Machine
View DetailsLines Industries And Guides
Timber Cutting and Board Joining Line
CRATOOLS builds timber cutting and board joining lines using its own machines and saw blades. The line processes logs, round...
Timber and Wood Board Processing
CRATOOLS has produced timber wood cutting machines for 10 years and manufactures saw blades in-house. The company supplies a...
Get A Price On The 2480 Full Automatic Wood Pieces Tenno Connecting Machine
Send the quantity, the diameters and the material you run. We answer with price, lead time and packing within 24 hours.