Stainless Steel or Fiberglass Resin for a Large Figure
Two completely different routes to a large sculpture, each with a form language it suits and one it fights.
Brass Sculpture
Modern Large-Scale Animal Cartoon Outdoor Decorative Glass Fiber Resin Figure
Modern Large-Scale Animal Cartoon Outdoor Decorative Glass Fiber Resin Figure is a fiberglass reinforced resin animal figure built to order in our Shenzhen workshop.
Product Overview
What This Piece Is
Modern Large-Scale Animal Cartoon Outdoor Decorative Glass Fiber Resin Figure is a fiberglass reinforced resin animal figure built to order in our Shenzhen workshop.
Animal figures give a public space a focal point that children and visitors approach, which is why malls and parks use them as meeting points.
Fiberglass takes complex modelled shapes that metal cannot be beaten into, and it stays light enough to lift into place without heavy plant.
A sketch, a render or a dimensioned drawing is enough to start a quotation.
Modern Large-Scale Animal Cartoon Outdoor Decorative Glass Fiber Resin Figure produced by Xinhengda Sculpture in Shenzhen
Key Benefits
Why Buyers Specify This Piece
- Moulded in fiberglass reinforced resin, which carries sculpted detail and cartoon proportions that sheet metal cannot reproduce.
- At large scale this animal figure is trial assembled in the workshop, then split into transportable sections with the joints placed where they will not be seen.
- Animal figures give a public space a focal point that children and visitors approach, which is why malls and parks use them as meeting points.
- The crate is built around the finished geometry of this animal figure, with foam contact on every finished face.
- Because the fiberglass reinforced resin is worked and finished in the same building, one team owns the surface from the first cut to the last pass.
Application Scenarios
Where It Is Installed
Placed wherever the drawing puts it, with the base and fixing detail set to suit that position for this animal figure.
Who It Is For
The People Who Order This
- Galleries and trade buyers reselling fiberglass resin animal figures into their own local projects
- Main contractors who need the animal figure, the base plate and the crate quoted as one package
- Private clients commissioning a single finished animal figure for the position it is going into
- Architects matching a animal figure to a material palette that already uses fiberglass resin
Problems It Solves
What This Piece Removes From the Project
- Figurative and cartoon forms are impossible to fabricate economically in sheet metal. A mould makes them repeatable and keeps the weight down for indoor floors and roof terraces.
- A animal figure specified late has to fit dimensions that are already fixed. Working from your drawing means the piece adapts instead of the scheme.
- Suppliers who subcontract the finishing cannot answer for the surface. The fiberglass reinforced resin here is cut, welded and finished under one roof.
- Getting a animal figure into the position it is going into is usually harder than the design assumed. Access is checked before the piece is built, not on delivery day.
Technical Features
How It Is Constructed
- Modelled figure with the internal structure sized for the pose rather than a standard frame
- Fabricated throughout in fiberglass reinforced resin with matching filler where the material is welded
- Internal frame sized to this animal figure rather than taken from a standard section list
- Base plate and anchor pattern for the animal figure issued as a drawing before the foundation is poured
Specifications
Recorded Specification
| Material | Fiberglass reinforced resin |
|---|---|
| Form | Animal Figure |
| Category | Brass Sculpture |
| Size | Quoted per project |
| Minimum Order | Quoted per project |
| Placement | Outdoor |
| Packing | Foam lined plywood crate built to the finished geometry |
| Origin | Shenzhen China |
Dimensions, weight and lead time for this animal figure are confirmed with the quotation, because it is built to your drawing rather than to a brass sculpture catalogue size.
Materials
What It Is Made From
- Fiberglass reinforced resin
- Stainless or galvanised fixings sized for this animal figure and supplied with it
Manufacturing Process
How It Is Made
1
Clay or digital modelling of the master form
2
Mould making from the approved master
3
Hand laminating of the fiberglass shell
4
Demoulding, trimming and seam filling
5
Fine sanding and primer coats
6
Colour coating and clear topcoat
Quality Control
What Is Checked and When
- Master form signed off before the mould is cut
- Laminate thickness checked at the thin sections
- Seams filled and sanded until they read as one surface
- Colour matched against the approved sample under daylight
- Topcoat film checked for runs and orange peel
Customisation Options
What Can Be Changed
- Design developed from your sketch, render or reference photograph
- Your own branding applied to the animal figure for resale as OEM or ODM work
- The fiberglass resin grade stepped up where the piece is going within reach of salt or treated water
- Proportions adjusted so the animal figure reads correctly from the approach distance in public spaces
Comparison
How It Compares With the Alternatives
Compared with Cast bronze
Bronze is heavier, slower and far more expensive per piece. Fiberglass gives the same modelled form at a fraction of the weight and lead time, with colour options bronze cannot match.
Compared with An imported gallery piece
A gallery animal figure arrives as it is. Working direct with the workshop means the size, the surface finish and the base for the position it is going into are decided before anything is cut.
Compared with A general metal fabricator
A fabricator can weld a animal figure but rarely has the polishing capacity. On fiberglass resin the surface work is where the piece is won or lost.
Use Guide
Looking After It Once It Is Installed
- Wash with water and a mild detergent, never a solvent
- Touch up chips early so moisture does not reach the laminate
- For permanent outdoor sites, ask for a UV stable topcoat at the quoting stage
- Lift from the base, not from projecting limbs or ears
Related Products
Other Pieces in Brass Sculpture
Brass Sculpture
Modern Large-Scale Animal Cartoon Outdoor Decorative Fiberglass Resin Goat Figure
View details
Brass Sculpture
Modern Large-Scale Animal Cartoon Outdoor Decorative Fiberglass Resin Money-Drawing Figure
View details
Brass Sculpture
Modern Large-Scale Animal Cartoon Outdoor Decorative Fiberglass Resin Giant Figure
View details
Brass Sculpture
Modern Large-Scale Cartoon-Style Outdoor Decorative Fiberglass Resin Gorilla Sculpture
View detailsRelated Reading
Guides That Apply To This Piece
Frequently Asked Questions
Why fiberglass reinforced resin rather than something cheaper
Fiberglass takes complex modelled shapes that metal cannot be beaten into, and it stays light enough to lift into place without heavy plant. Figurative and cartoon forms are impossible to fabricate economically in sheet metal. A mould makes them repeatable and keeps the weight down for indoor floors and roof terraces.
How is a animal figure this size packed and shipped
A plywood crate is built around the finished geometry with foam on every finished face. Large animal figures are split into sections at joints chosen during design, trial assembled in the workshop, then marked so they go back together in the same order on site.
What do you need from me to quote
The position, the height or overall size you want, and any drawing, render or reference photograph you already have. For the position it is going into a photograph of the space is often enough to start.
What is the lead time
Lead time depends on the size of the animal figure, the surface finish and how much design work it needs, so it is confirmed with the quotation rather than promised in advance. Send the brief and the schedule comes back with the price.
Quote This Piece for Your Project
Send the position, the height you want and any drawing you have. The quotation comes back against your figures, not against a catalogue size.