Stainless Steel or Fiberglass Resin for a Large Figure
Two completely different routes to a large sculpture, each with a form language it suits and one it fights.
Animal Sculpture
Size Modern Home Decorations Animal Panda Fiberglass Sculpture Statue
Size Modern Home Decorations Animal Panda Fiberglass Sculpture Statue is a fiberglass reinforced resin animal figure built to order in our Shenzhen workshop.
Product Overview
What This Piece Is
Size Modern Home Decorations Animal Panda Fiberglass Sculpture Statue is a fiberglass reinforced resin animal figure built to order in our Shenzhen workshop.
Animal figures give a public space a focal point that children and visitors approach, which is why malls and parks use them as meeting points.
Fiberglass takes complex modelled shapes that metal cannot be beaten into, and it stays light enough to lift into place without heavy plant.
The minimum order is one piece, the size is set by your drawing rather than by a catalogue.
Size Modern Home Decorations Animal Panda Fiberglass Sculpture Statue produced by Xinhengda Sculpture in Shenzhen
Key Benefits
Why Buyers Specify This Piece
- Moulded in fiberglass reinforced resin, which carries sculpted detail and cartoon proportions that sheet metal cannot reproduce.
- Height, width and base detail for this animal figure are set from your drawing, so it is proportioned to the space instead of being the nearest standard size.
- One animal figure is a full order. A single project in villas and private residences does not have to wait for a container quantity.
- Animal figures give a public space a focal point that children and visitors approach, which is why malls and parks use them as meeting points.
- Anything about this animal figure that has to change for villas and private residences is settled on the drawing, where changes still cost nothing.
- Fixing points and the anchor pattern for this animal figure are drawn before fabrication, so site work is bolt down rather than improvisation.
Application Scenarios
Where It Is Installed
Placed in a living room, a corridor or a private garden, at a scale that suits a domestic ceiling height.
Who It Is For
The People Who Order This
- Private clients commissioning a single finished animal figure for villas and private residences
- Architects matching a animal figure to a material palette that already uses fiberglass resin
- Facility and estate managers replacing a tired feature in villas and private residences with something that needs no repainting
- Landscape architects specifying a finished animal figure as the focal piece for villas and private residences
Problems It Solves
What This Piece Removes From the Project
- Figurative and cartoon forms are impossible to fabricate economically in sheet metal. A mould makes them repeatable and keeps the weight down for indoor floors and roof terraces.
- Off the shelf animal figures are never the size villas and private residences actually needs, so schemes end up compromised. Making this one to the drawing removes that compromise.
- Commissioning a single animal figure usually means a studio price and a studio lead time. Factory fabrication of one piece keeps both in range.
- Large animal figures are often quoted without the base, the fixings or the crate, and the budget moves after the order. Those are quoted up front here.
Technical Features
How It Is Constructed
- Modelled figure with the internal structure sized for the pose rather than a standard frame
- Fabricated throughout in fiberglass reinforced resin with matching filler where the material is welded
- Edges and arrises detailed for the contact a animal figure gets in villas and private residences
- Internal frame sized to this animal figure rather than taken from a standard section list
Specifications
Recorded Specification
| Material | Fiberglass reinforced resin |
|---|---|
| Form | Animal Figure |
| Category | Animal Sculpture |
| Size | Made to your drawing |
| Minimum Order | 1 piece |
| Placement | Quoted per project |
| Packing | Foam lined plywood crate built to the finished geometry |
| Origin | Shenzhen China |
Dimensions, weight and lead time for this animal figure are confirmed with the quotation, because it is built to your drawing rather than to a animal sculpture catalogue size.
Materials
What It Is Made From
- Fiberglass reinforced resin
- Stainless or galvanised fixings sized for this animal figure and supplied with it
Manufacturing Process
How It Is Made
1
Clay or digital modelling of the master form
2
Mould making from the approved master
3
Hand laminating of the fiberglass shell
4
Demoulding, trimming and seam filling
5
Fine sanding and primer coats
6
Colour coating and clear topcoat
Quality Control
What Is Checked and When
- Master form signed off before the mould is cut
- Laminate thickness checked at the thin sections
- Seams filled and sanded until they read as one surface
- Colour matched against the approved sample under daylight
- Topcoat film checked for runs and orange peel
Customisation Options
What Can Be Changed
- Overall height, width and depth of the animal figure set from your drawing or from the dimensions of villas and private residences
- Base detail changed between a flush plate, a plinth and a direct planting bed fixing
- The animal figure split into transportable sections where access to villas and private residences is restricted
- Lighting designed into the animal figure with the cable route concealed
Comparison
How It Compares With the Alternatives
Compared with Cast bronze
Bronze is heavier, slower and far more expensive per piece. Fiberglass gives the same modelled form at a fraction of the weight and lead time, with colour options bronze cannot match.
Compared with A general metal fabricator
A fabricator can weld a animal figure but rarely has the polishing capacity. On fiberglass resin the surface work is where the piece is won or lost.
Compared with A rented or temporary installation
Rental suits an event. For a permanent position in villas and private residences the cost of two or three rentals already covers a animal figure that stays.
Use Guide
Looking After It Once It Is Installed
- Wash with water and a mild detergent, never a solvent
- Touch up chips early so moisture does not reach the laminate
- For permanent outdoor sites, ask for a UV stable topcoat at the quoting stage
- Lift from the base, not from projecting limbs or ears
Related Products
Other Pieces in Animal Sculpture
Animal Sculpture
Animal Water Feature Park Lawn Animation Metal Home Decoration
View details
Animal Sculpture
Stainless Steel Mirror Dolphin
View details
Stainless Steel Sculpture
Stainless Steel Mirror Geometry Block Face Leopard Large Metal
View details
Animal Sculpture
Custom Animal Sculpture Garden Shopping Mall Park Forest Decorative
View detailsRelated Reading
Guides That Apply To This Piece
Frequently Asked Questions
Can this be made in a different size
Yes. Size Modern Home Decorations Animal Panda Fiberglass Sculpture Statue is made to order, so the height and width are set from your drawing or from the dimensions of the space. Send the position and the height you have in mind and the quotation follows those figures.
What is the minimum order quantity
One piece. There is no container minimum, which is why single projects in villas and private residences are a normal part of the workload here.
Why fiberglass reinforced resin rather than something cheaper
Fiberglass takes complex modelled shapes that metal cannot be beaten into, and it stays light enough to lift into place without heavy plant. Figurative and cartoon forms are impossible to fabricate economically in sheet metal. A mould makes them repeatable and keeps the weight down for indoor floors and roof terraces.
How is a animal figure this size packed and shipped
A plywood crate is built around the finished geometry with foam on every finished face. Large animal figures are split into sections at joints chosen during design, trial assembled in the workshop, then marked so they go back together in the same order on site.
What do you need from me to quote
The position, the height or overall size you want, and any drawing, render or reference photograph you already have. For villas and private residences a photograph of the space is often enough to start.
What is the lead time
Lead time depends on the size of the animal figure, the surface finish and how much design work it needs, so it is confirmed with the quotation rather than promised in advance. Send the brief and the schedule comes back with the price.
Quote This Piece for Your Project
Send the position, the height you want and any drawing you have. The quotation comes back against your figures, not against a catalogue size.