4-in-1 Wireless Charging Office Mouse Pad | Pen Holder & Phone Stand
A 250x270mm fabric-textured mouse pad with a plastic module along one edge carrying a four-slot pen holder, a phone cradle for 4.7-6.7in devices and a 15W Qi charging zone. Four desk functions on one footprint, specified for volume office procurement where each additional accessory is a separate PO line and a separate box to unpack.
- Four functions on one 250x270mm footprint, replacing four purchase lines
- Four pen slots sized for standard ballpoints through to gel pens
- Phone cradle keeps the screen visible during calls while it charges
- Fabric-textured surface is anti-scratch and anti-stain for shared desks
- 100x50mm branding area plus Pantone matching on both pad and module
MOQ 100 units per customised style. Sampling 7–10 working days on most changes. Send AI or CDR vector artwork with your colour reference.
What it solves
- Pens, phone, charger and pad are four purchases, four SKUs and four sources of mismatch
- Loose pens roll off desks and are constantly re-ordered
- A phone lying flat cannot be seen during a call or a data-entry task
- Un-branded accessories waste the most-looked-at surface on the desk
Who specifies it
- Procurement teams standardising desk accessories across sites
- Office supply distributors carrying a branded tech line
- HR teams assembling onboarding kits
- Promotional product agencies
Specifications
Every figure below comes from the product specification. Where a value is adjustable, the page says so.
| Functions | 4-in-1: mouse surface, 15W Qi charger, 4-slot pen holder, phone stand |
|---|---|
| Overall Size | 250 x 270 mm |
| Charging Output | 15W Qi, adaptive 5W / 7.5W / 10W |
| Phone Size Range | 4.7 - 6.7 in |
| Pen Slots | 4, sized for conventional and gel pens |
| Pad Material | Wear-resistant fabric-textured composite, anti-scratch and anti-stain |
| Module Material | Black moulded plastic |
| Branding Area | 100 x 50 mm print or emboss |
| Safety Standards | FCC / CE |
| Sampling Lead Time | 7-10 working days |
Customisation
- Pantone colour matching on the pad surface and on the plastic module
- Logo printing or embossing within a 100x50mm area
- Module design changes, including slot arrangement
- Sampling cycle 7-10 working days from confirmed artwork
Quality control
- Module seated and pull-tested against the pad body before packing
- Charging output verified with a reference handset on the marked zone
- Pen slot opening width gauged against standard and gel pen bodies
- Declared to FCC and CE safety standards; certificate copies available on request
Against the alternative
The comparison is against the commodity version of the same product, which is usually what the incumbent quotation is for.
| Aspect | This product | Commodity equivalent |
|---|---|---|
| Functionality | Mouse pad, charger, pen holder and phone stand | Mouse function only |
| Storage | 4-slot pen holder | None, or a 1-2 slot plastic cup |
| Charging | Built-in 15W Qi zone | No charging function |
| Branding | Colour, logo and module customisation | Surface printing only |
Where it is used
- Volume office desk fit-outs and new-hire kits
- Hybrid work equipment packs
- Branded corporate gifts for technology and services firms
- Call centre and operations floor desk standardisation
In use and care
Position the module edge away from the mouse travel area
Place the phone in the cradle with the back against the charging face
Load pens tip-down into the four slots to keep the surface clean
Dry-cloth the fabric daily; lift light stains with a wrung-out damp cloth and dry
Questions buyers ask
Do the pen slots take different pen thicknesses?
Yes. The four slots accept conventional ballpoints and gel pens; the opening width suits most office writing instruments.
How do I clean the fabric surface?
Dust daily with a dry cloth. Light stains come off with a damp cloth that has been wrung out, then dried. The material resists fading and deformation.
Can the module colour be matched to our brand?
Yes. The plastic module supports Pantone colour matching. Specify the colour reference in the order; sampling takes 7-10 working days.
What is the mouse tracking surface like?
A fabric-textured composite that suits both wired and wireless mice for daily task and data-entry work.
Quote the 4-in-1 Wireless Charging Office Mouse Pad
Tell us the quantity, the colour reference and any layout change. A quotation and a sampling date come back, usually within one working day.