Vehicle & marine LED lighting since 2010 30+ series · 200+ models Exported to 80+ countries
Sunlitec Lighting logo Request A Quote
Sunlitec LED driving lights and auxiliary beam lamps
Guide

E-mark CISPR 25 And FMVSS 108 Explained For Importers

Three approvals that decide whether your container clears customs and whether your customers pass inspection.

E-mark Is About Legality On The Road

E-mark approval covers vehicle lighting sold and fitted in markets that follow the United Nations regulations, which includes Europe and Australia among others. Without it an auxiliary lamp fitted to a road vehicle can fail a roadworthy inspection, which turns your stock into a problem for the people who bought it from you. Ask for the certificate that covers the exact model, not a general company statement.

CISPR 25 Is About Not Breaking The Vehicle

A switching LED driver generates electrical noise. CISPR 25 sets limits on that noise so lighting does not interfere with radio reception, telematics, GPS or the vehicle’s own electronics. Class 4 is a demanding level within that standard. This matters far more now than it did ten years ago, because fleets run telematics on everything and a noisy lamp produces complaints that are difficult to diagnose.

FMVSS 108 Is The North American Equivalent

FMVSS 108 is the United States federal standard covering vehicle lamps, reflective devices and associated equipment. If you are importing into North America it is the reference your customers will expect. A supplier who can produce E-mark and FMVSS 108 documentation for the same model saves you running two separate product lines for two markets.

What To Ask A Supplier For

Ask for documentation against the specific model number you are quoting, with a date. Ask whether the certificate covers the current production build or an earlier revision. Ask whether the electromagnetic compatibility testing was done on the lamp as it ships, including the harness, since the harness affects the result. Vague answers to these questions are themselves an answer.

Where Sunlitec Stands

Sunlitec lights are E-mark approved, built to CISPR 25 Class 4 and tested to FMVSS 108, and production runs under ISO 9001 controlled process with mechanical, electronic and optical testing before release. Ask us for the documentation covering the models on your quotation and we will send it with the offer so it is in hand before the container is booked.

Sunlitec LED driving lights and auxiliary beam lamps
Sunlitec LED driving lights and auxiliary beam lamps
FAQ

Questions On This Topic

Do I need E-mark for off-road only products?
Strictly no, but many buyers will still ask for it, and a lamp sold as off-road only can end up fitted to a road vehicle. Check what your market expects.
Can you supply certificates before I place an order?
Yes. Tell us the models you are quoting and we will send the documentation with the offer.
Keep exploring

Products Covered In This Guide

Sunlitec LED head lights and oval machinery lamps
LED Driving Lights

LED Head Light

LED head lamps and oval machinery lamps that replace sealed beam units on equipment and older vehicles.

View product →

Need This Applied To Your Own Application

Send the vehicle or machine and what you are trying to light. We will give you a specific answer rather than a general one.