7 Inch New Exclusive Osram 45W Big Refelector Built-in DT Connector Long Distance 500M
It uses a single 45W Osram LED chip to project a focused beam up to 500 meters, which helps operators on excavators, cranes, and mining trucks see obstacles and terrain features far ahead. The built-in Deutsch DT connector simplifies wiring on machines with pre-fitted harnesses, and the lamp is CE, RoHS and ECE certified for use on road-going vehicles.
- Spot beam pattern projects light up to 500 meters for long-range visibility on off-road and industrial machines
- Built-in Deutsch DT connector eliminates the need for field splicing and reduces connection failure risk
- Single 45W Osram LED delivers high lumen output with a real power draw of 45W and a theoretical lumen rating of 7000 lm
- ECE certification ensures compliance with electromagnetic compatibility standards for road inspection in Europe
- Die-cast aluminium housing with semi-gloss black powder coating resists corrosion and handles high thermal loads
Where This Lamp Is Used
- Front driving lighting on excavators and mining trucks operating at night in open pits
- Long-range visibility on cranes and engineering vehicles used in remote construction zones
- Auxiliary headlight on 4x4 vehicles and utility trucks where standard halogen beams fall short
- Mounting on the front of forklifts and service vehicles in large warehouses with high ceilings
- Replacement for short-range halogen headlights on machinery that must operate beyond daylight
Who It Is For
- Distributors of off-road vehicle lighting needing a single model with long reach and reliable connector
- Machinery OEMs integrating a consistent lighting solution into production lines with pre-wired harnesses
- Fleet operators replacing halogen headlights that degrade quickly and lack long-distance reach
- 4x4 accessory brands building a private label driving light line with a built-in connector
- Equipment dealers fitting lights on machines that must pass road inspection in Europe
Problems It Solves
- Halogen driving lights have a short effective range and fail under vibration from heavy machinery
- Field spliced wiring connections degrade over time and cause intermittent faults in harsh environments
- Uncertified driving lights may fail an ECE electromagnetic compatibility check during road inspection
- Narrow beam lights with low lumen output leave the far edge of the path dark and reduce safety
Technical Features
- Single 45W Osram LED chip with a theoretical lumen output of 7000 lm and real power draw of 45W
- Spot beam pattern with a 500 meter effective reach under standard test conditions
- Built-in Deutsch DT connector for direct plug-in to pre-fitted machine harnesses
- Anti-scratch UV resistant polycarbonate lens over the LED array
- Operating voltage range of 10-30V DC to work on both 12V and 24V systems
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Size | Round 7 inch |
|---|---|
| Max Power | 45W |
| Real Power | 45W |
| LED | 1 x 45W Osram |
| Effective Lumen | Not specified |
| Beam Pattern | Spot |
| Light Distance | 500 meters |
| Colour Temperature | Not specified |
| Amp Draw | Not specified |
| Lens Material | Anti-scratch PC |
| Bracket Material | Included with housing |
| Electrical Connection | Built-in Deutsch DT connector |
| Lifetime | Not specified |
| Net Weight | Not specified |
| Packing | Not specified |
| Certification | CE, RoHS, ECE |
Materials Used
- Anti-scratch UV resistant polycarbonate lens
- Deutsch DT connector with sealed housing
- Semi-gloss black powder coating on the full housing
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in semi-gloss black
LED board assembly with a single Osram 45W chip
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Vibration testing on a vibration test machine to simulate machine-mounted service
- Salt spray corrosion testing on housing coating and connector housing
Customisation Options
- Alternative beam pattern (flood or combo) available on request
- Custom cable length for specific machine harnesses
- Private label logo on the housing and printed carton
- Alternative connector type instead of the built-in DT connector
- Mixed cartons combining this light with other SUNLITEC models for trial orders
How It Compares With the Alternatives
| Round 5 inch driving light | Larger 7 inch body allows more LED area and better heat dissipation but requires more front mounting space |
|---|---|
| Spot beam with external connector | Built-in DT connector reduces field wiring errors and improves long-term reliability |
| Flood beam version of same model | Spot reaches 500 meters ahead while flood covers a wider area but with reduced reach |
How to Fit and Use It
- Plug the built-in Deutsch DT connector directly into the machine’s pre-wired harness without field splicing
- Aim the spot beam at the far edge of the path to maximize visibility at 500 meters
- Keep the connector housing sealed and avoid pointing the cable entry upward to prevent water ingress
- Clean the PC lens with water and a soft cloth only—avoid solvents that may damage the anti-scratch coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 10 to 30V DC, so the same part number can be fitted to 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is CE, RoHS and ECE certified, which ensures compliance with electromagnetic compatibility and safety standards for road use.
Get a Price on 7 Inch New Exclusive Osram 45W Big Refelector Bu
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.