Home Appliance Steel
PCM coated steel for appliance panels, coated and printed before forming.
- Base Metal Thickness0.2mm to 1.2mm
- Coil Width800mm to 1500mm
- Coil Inner Diameter508mm and 610mm
Home Appliances Steel
Pre-coated PCM steel for appliance panels supplied plain or printed and finished before forming.
Home appliances steel is a PCM coil, coated and printed before it reaches your press. The panel leaves the line already finished, which removes spraying, curing and touch up from appliance assembly.
Who This Range Is For
- Refrigerator, freezer and washing machine panel producers
- Air conditioner and water heater casing manufacturers
- Kitchen appliance and cabinet panel converters
- Contract manufacturers building panels for appliance brands
Problems It Solves
- Paint shop capacity limiting panel output
- Colour differences between sprayed batches on the same appliance
- Handling marks appearing on finished panels before assembly
- Coating damage during forming and transport
Core Advantages
- Coated and printed before forming so no paint line is needed
- Protection film guards the face through forming and transport
- Consistent colour across a coil
- Base steel selectable as GI, GL, EG, CR or aluminium
| Base Metal Thickness | 0.2mm to 1.2mm |
|---|---|
| Coil Width | 800mm to 1500mm |
| Coil Inner Diameter | 508mm and 610mm |
| Coil Weight | Max. 8 MT |
| Metallic Coating | Z60 to Z275 and AZ60 to AZ180 |
| Organic Coating Thickness | 20 to 40 micron |
| Yearly Capacity | 80000 MT |
Products In This Range
Coating Build Up
Nine layers between the protective film and the backing coat.
| Layer | Type | Function |
|---|---|---|
| Protection Film | Polyethylene | Protects the paintwork from scratching and contamination |
| Clear Varnish | PE / SMP / HDP / PVDF | Transparent layer protects the printed layer and improves surface appearance |
| PVDF ink, PE | Carries the pattern, three colour printing | |
| Top Coating | PE / SMP / HDP / PVDF | Gives colour and appearance and forms a barrier film for long term durability |
| Primer | Polyester | Prevents undercutting of the paint and improves corrosion resistance |
| Chemical Treatment | Cr-free passivation | Pre-treatment layer for paint adhesion and corrosion resistance |
| Base Steel | GI, GL, EG, CR, AL | Galvanized steel, aluzinc steel, electro-galvanized steel, cold rolled steel or aluminium sheet |
| Chemical Treatment | Cr-free passivation | Adhesion and corrosion resistance on the reverse side |
| Backing Coating | Epoxy resin | Improves corrosion resistance and adhesion to the substrate |
Frequently Asked Questions
Which sizes are available in this range?
base metal thickness 0.2mm to 1.2mm; coil width 800mm to 1500mm; coil inner diameter 508mm and 610mm; coil weight Max. 8 MT.
Can the specification be adjusted?
The published figures are ranges. Send the thickness, width and coil format your line needs and we will confirm what can be produced against them.
What is confirmed before production starts?
Product, thickness, coil width, colour or pattern, coil inner diameter and coil weight are confirmed in writing before the order is released.
How is quality controlled?
Senko Steel states that an international standard QC management system is applied to this production, so that output is in line with high end domestic and international manufacturing standards.
Ask For A Quotation On Home Appliances Steel
Send thickness, coil width, colour or pattern and quantity. We reply on WhatsApp or by email.