Wood Pattern Steel
Wood grain printed PCM steel coil for panels, doors and interior cladding.
- Base Metal Thickness0.2mm to 1.2mm
- Coil Width800mm to 1500mm
- Coil Inner Diameter508mm and 610mm
Decorative Pattern Steel
Printed PCM steel in wood brick stone and camouflage patterns for interior and exterior panel work.
Decorative pattern steel is special PCM steel rather than common PPGI. The pattern is printed into the coating build-up, protected by a clear varnish and a peel film. Wood, brick, stone and camouflage patterns are standard and all patterns can be custom made.
Who This Range Is For
- Sandwich panel and wall cladding producers
- Interior decoration and ceiling panel manufacturers
- Door, shutter and furniture panel converters
- Contractors specifying a printed metal finish instead of laminate
Problems It Solves
- Real timber and stone finishes that cannot meet fire or moisture requirements
- Laminate faces that lift at the edges after forming
- Pattern repeats that do not line up across a panel run
- Coating wear during roll forming and installation
Core Advantages
- Wood brick stone and camouflage patterns held in stock designs
- All patterns can be custom made
- Three colour printing under a protective clear varnish
- Protection film keeps the face clean until installation
| Base Metal Thickness | 0.2mm to 1.2mm |
|---|---|
| Coil Width | 800mm to 1500mm |
| Coil Inner Diameter | 508mm and 610mm |
| Coil Weight | Max. 8 MT |
| Metallic Coating | Z60 to Z275 and AZ60 to AZ180 |
| Organic Coating Thickness | 20 to 40 micron |
| Yearly Capacity | 80000 MT |
Products In This Range
Brick Pattern Steel
Brick pattern printed PCM steel coil for facade and feature wall panels.
- Base Metal Thickness0.2mm to 1.2mm
- Coil Width800mm to 1500mm
- Coil Inner Diameter508mm and 610mm
Stone Pattern Steel
Stone pattern printed PCM steel coil for cladding that needs a masonry face without masonry weight.
- Base Metal Thickness0.2mm to 1.2mm
- Coil Width800mm to 1500mm
- Coil Inner Diameter508mm and 610mm
Camouflage Pattern Steel
Camouflage pattern printed PCM steel coil for shelters, containers and specialised enclosures.
- Base Metal Thickness0.2mm to 1.2mm
- Coil Width800mm to 1500mm
- Coil Inner Diameter508mm and 610mm
Coating Build Up
Nine layers between the protective film and the backing coat.
| Layer | Type | Function |
|---|---|---|
| Protection Film | Polyethylene | Protects the paintwork from scratching and contamination |
| Clear Varnish | PE / SMP / HDP / PVDF | Transparent layer protects the printed layer and improves surface appearance |
| PVDF ink, PE | Carries the pattern, three colour printing | |
| Top Coating | PE / SMP / HDP / PVDF | Gives colour and appearance and forms a barrier film for long term durability |
| Primer | Polyester | Prevents undercutting of the paint and improves corrosion resistance |
| Chemical Treatment | Cr-free passivation | Pre-treatment layer for paint adhesion and corrosion resistance |
| Base Steel | GI, GL, EG, CR, AL | Galvanized steel, aluzinc steel, electro-galvanized steel, cold rolled steel or aluminium sheet |
| Chemical Treatment | Cr-free passivation | Adhesion and corrosion resistance on the reverse side |
| Backing Coating | Epoxy resin | Improves corrosion resistance and adhesion to the substrate |
Where This Range Is Used
- Home Appliance ManufacturingPre-coated panel steel for appliance makers who want the finish done before the press.
- Building Decoration And PanelsPrinted pattern steel for cladding ceiling and panel producers who need a decorative metal face.
- Custom Pattern Printed SteelWood brick stone camouflage or your own artwork printed into a PCM coating build-up.
- Appliance Panel Steel SupplyPre-coated coil that lets an appliance panel leave the press already finished.
Guides For This Range
Frequently Asked Questions
Which sizes are available in this range?
base metal thickness 0.2mm to 1.2mm; coil width 800mm to 1500mm; coil inner diameter 508mm and 610mm; coil weight Max. 8 MT.
Can the specification be adjusted?
The published figures are ranges. Send the thickness, width and coil format your line needs and we will confirm what can be produced against them.
What is confirmed before production starts?
Product, thickness, coil width, colour or pattern, coil inner diameter and coil weight are confirmed in writing before the order is released.
How is quality controlled?
Senko Steel states that an international standard QC management system is applied to this production, so that output is in line with high end domestic and international manufacturing standards.
Ask For A Quotation On Decorative Pattern Steel
Send thickness, coil width, colour or pattern and quantity. We reply on WhatsApp or by email.