Specification Guides for Buyers Who Have To Get It Right
9 guides covering tyre load index tables, OTR service codes, formwork panel specification, panel material comparison, pump identification and battery selection. Written from the same data published on the product pages.
9 Technical Guides
How to Cut Oak Plywood Without Chipping
Why thin face veneers tear at the cut, and the blade, feed and support choices that stop it happening.
Read the guide →Buying GuideReading a Truck Tyre Size and Load Index Table
What each column of a TBR specification table means, and how to check a tyre against your axle load before you order.
Read the guide →Material GuideChoosing Film Faced Plywood for Concrete Formwork
Face, glue, grade and core are four separate decisions. Each one moves the cost per pour, and they are often all left to the supplier.
Read the guide →Comparison ArticleMDF Particle Board and Plywood Compared
Three panel families, three different structures, and the practical consequences for machining, fixing and finishing.
Read the guide →Troubleshooting GuideIdentifying a Power Steering Pump by OEM Number
Why ordering on the truck model produces the wrong pump, and what to read off the unit instead.
Read the guide →Product GuideUnderstanding OTR Tyre Service Codes E L and G
What E-3, L-3, E-4 and G-2 actually specify, and why fitting the wrong code costs more than the tyre.
Read the guide →Buying GuideChoosing a Maintenance Free Starter Battery
Capacity, cold cranking amps, reserve capacity and terminal position — which figure actually decides whether the engine starts.
Read the guide →Product GuideTBR OTR AGR and PCR Tyre Classes Explained
Four abbreviations that appear on every tyre catalogue, what each class is built for, and how buying logic differs between them.
Read the guide →Buying GuideSpecifying a Granite Tile or Slab Order
Colour is only the first decision. Finish, thickness, format and batch control are what determine whether the stone that arrives matches the stone you approved.
Read the guide →About the Knowledge Centre
Who writes these guides?
They are written from the specification data published on this site — the same load index tables, glue classes and OEM cross-references that appear on the product pages.
Can you advise on a specification for my project?
Yes. Send the application on WhatsApp at +86 139 0428 2548 and a recommendation comes back in writing.
Are the guides downloadable?
The specification tables behind them are available as PDFs in the Download Centre.
Have a Specification Question
Send the application, the machine or the part number. A written recommendation comes back before any order is discussed.