Hangzhou Iroga Technology Co., Ltd · 3D Supplier Worldwide
Request A Quote
Corporate and Property Branding served by IROGA 3D

Corporate and Property Branding

A corporate mark has to be reproduced exactly, and splitting it across fabricated sections is where that goes wrong. A 1200 mm bed keeps most marks in one piece, so the geometry that was signed off is the geometry that gets installed.

Request A Quote All Products

Pain Points We Hear

  • Splitting a logo into sections distorts the mark and shows joins
  • Joins in outdoor signage admit water and stain the facade
  • Reception lettering is viewed at close range where finish matters
  • Brand guidelines specify colours that are hard to match with paint or vinyl
  • Facilities teams inherit signage they cannot economically repair

What This Industry Needs

  • One piece production of the complete mark
  • Colour matched through the material rather than applied
  • Halo and frontlit options for different building surfaces
  • A finish suitable for close viewing in a reception area
  • Replaceable elements produced from the same file years later
Recommended Products

Products for Corporate and Property Branding

Typical Application Scenarios

  • Building entrance identity signs
  • Reception and lobby logo walls
  • Halo lit marks on facades and car park structures
  • Property and estate wayfinding identity

Delivery Capability

  • Production around 20 to 25 days for machines, 7 to 30 days across the range
  • DDP delivery to site or warehouse available
  • Fumigation free wooden boxes for machines and export cartons for material
  • Lifetime technical support
How We Work

The Route We Recommend

Check step

Check the largest element of the mark against the 1200 mm envelope

Choose step

Choose halo lit or frontlit according to the building surface

Print step

Print the mark in one piece and fit the LED strip before closing

Archive step

Archive the file and batch so replacements match

Solutions

Go Deeper

Solution

Outdoor Signage Durability

Most outdoor sign failures trace back to a material decision made at quotation stage. This is the specification route we use, with...

Read more
Solution

From Artwork to Installed Sign

Every stage between an approved drawing and a lit sign on a wall, and what usually goes wrong at each one. This is the workflow th...

Read more
Project Profiles

Related Work

Knowledge

Further Reading

Questions

Frequently Asked Questions

Answers to what buyers ask before ordering Corporate and Property Branding.

How large can a logo be printed in one piece

Up to 1200 x 1200 x 120 mm on the new generation large format machine.

What is the advantage of a one piece mark

No joins to align seal or maintain, and the geometry that was approved is the geometry produced.

Halo lit or frontlit for a building entrance

Halo lit suits a clean facade with clearance behind the sign. Frontlit is brighter head on and works where the sign is approached directly.

Can the brand colour be matched exactly

Stock colours cover most palettes. An exact custom colour has a minimum of 100 rolls.

Can damaged elements be replaced later

Yes, by reprinting from the archived file in the same filament colour.

Talk To Someone Who Knows This Work

Tell us the sizes volumes and destinations you work with and we will put a specification together.

Chat on WhatsApp Email Us Download Centre