Welding of stainless steel machine frames at the Huayan Medical plant

Rehabilitation and Physiotherapy Centres Equipment From the Factory That Builds It

Rehabilitation departments and physiotherapy centres require dependable, standardised equipment to introduce TCM physical therapy alongside existing care protocols. Huayan Medical supplies clinical physical therapy devices, including RHL-I wax therapy units and SDZ-III electronic acupuncture stimulators, to relieve pain, soften scar tissue, and improve circulation through repeatable treatment cycles.

Talk To An Engineer Recommended equipment

Pain Points

Where Rehabilitation and Physiotherapy Centres Lose Time and Money

Manual massage and needle manipulation place repetitive physical strain on therapy staff across continuous treatment sessions
Inconsistent heat retention in basic heating pads fails to deliver deep thermal therapy for stubborn scar tissue
Finding precise acupuncture points manually slows down session turnover when treating multiple rehabilitation patients in parallel
Therapy rooms risk irregular wax consistency when temperature and physical viscosity are not carefully controlled
Unreliable pulse waveforms and unstable output currents cause patient discomfort during electro-acupuncture sessions
Procurement delays occur when clinic managers source electro-acupuncture, wax therapy, and fumigation units from disparate vendors
A lack of standardised built-in timers leaves treatment duration dependent on individual therapist memory and monitoring

What You Actually Need

Requirements We Design Around

Wax therapy equipment with melting points between 50 °C and 60 °C for predictable viscosity and tissue application
Electronic stimulation devices offering multiple selectable waveforms and integrated timers to standardise rehabilitation therapy protocols
Acupoint detection capability to assist therapists in locating treatment sites before applying low-frequency electrical pulse currents
Support for both invasive needle stimulation and surface electrode pads to accommodate different patient pain tolerances
Equipment running on standard AC 220 V 50 Hz power supplies without requiring dedicated electrical modifications
Devices certified under ISO 9001, ISO 13485, and CE for hospital and clinical engineering approval
Fast dispatch with wear parts included so treatment rooms maintain uninterrupted daily patient appointments

Recommended Equipment

Equipment Specified By Rehabilitation and Physiotherapy Centres

Rehabilitation departments and physiotherapy centres require dependable, standardised equipment to introduce TCM physical therapy alongside existing care protocols.

Huayan RH-XZ-C TCM fumigation treatment machine acrylic bed with independent heating zones

Fumigation Treatment TCM Fumigation Treatment Machine RH-XZ-C The RH-XZ-C is a TCM fumigation treatment machine engineered for hospitals, acupuncture wards and rehabilitation... View specifications

Huayan RH-XZ-D TCM fumigation treatment machine with acrylic shell and micro-computer control panel

Fumigation Treatment TCM Fumigation Treatment Machine RH-XZ-D The RH-XZ-D is a TCM fumigation treatment machine designed for thermal, steam, and herbal physical therapy across... View specifications

Huayan RH-CJB-A radial shock wave therapy device main console with handpiece and display

Shock Wave Therapy Shock Wave Therapy Device RH-CJB-A The RH-CJB-A is a radial shock wave therapy device designed for physiotherapy, joint rehabilitation, and pain... View specifications

Huayan RH-CJB-B mobile shock wave therapy device with touch panel and treatment gun

Shock Wave Therapy Shock Wave Therapy Device RH-CJB-B The RH-CJB-B is an emission-type radial shock wave therapy device designed for physiotherapy departments, TCM clinics... View specifications

Huayan RH-K-GJ-II TCM moxibustion therapy device mounted on a movable trolley with treatment applicator

Moxibustion Therapy TCM Moxibustion Therapy Device RH-K-GJ-II The RH-K-GJ-II is a multi-function TCM moxibustion therapy device that integrates thermal treatment, infrared laser... View specifications

Huayan RH-K-GJ-III TCM moxibustion therapy device on a mobile trolley frame

Moxibustion Therapy TCM Moxibustion Therapy Device RH-K-GJ-III The RH-K-GJ-III is a multifunctional TCM moxibustion therapy device combining thermal treatment, infrared laser... View specifications

Huayan Medical RHL-I wax therapy device showing mobile cabinet with rubber casters and control interface

Wax Therapy Wax Therapy Device RHL-I The RHL-I is an automated wax therapy device designed to melt, filter, and maintain paraffin wax for physical therapy... View specifications

GreatWall KWD-808I electronic acupuncture stimulator front panel showing six output dials and wave selectors

Acupuncture Stimulators GreatWall KWD-808I Electronic Acupuncture Stimulator The GreatWall KWD-808I is a microcomputer electronic acupuncture stimulator designed for acupoint detection,... View specifications

Typical Scenarios

How the Room Actually Runs

Wax cake preparation at 50 °C to 60 °C applied to soften scar tissue and reduce joint contractures
Targeted electro-acupuncture therapy using low-frequency pulses across selected waveforms to relieve acute and chronic muscle pain
Acupoint detection via dual jacks to map treatment sites prior to electrode pad or needle application
Wax dipping and brushing procedures conducted on extremities to increase local blood circulation and resolve edema
Combined physical therapy protocols integrating electronic muscle stimulation alongside scheduled wax application in rehabilitation rooms

What We Deliver With The Machine

One year free warranty from qualified commissioning with free replacement of faulty components
Wear parts packed with initial equipment shipment to prevent therapy room service interruptions
Free remote video guidance covering equipment installation, electrical setup, and fault diagnosis
On-site installation and clinical operator training available for multi-unit institutional rehabilitation orders
Operator and technician training offered directly at our Tianjin factory facility
Direct factory procurement with replacement parts supplied at cost price following warranty expiration

How A Project Runs

How an Order Runs From Enquiry to Handover

{'t': 'Clinical Requirements Review', 'd': 'You outline planned physical therapies and room volume; we confirm suitable wax therapy and electro-acupuncture unit configurations.'}
{'t': 'Specification Sign Off', 'd': 'Voltage compatibility, rated input power, and waveform requirements are verified with your clinical engineering team.'}
{'t': 'Quotation and Documentation', 'd': 'A detailed commercial quotation is returned within 12 hours alongside ISO 13485, ISO 9001, and CE certificates.'}
{'t': 'Device Assembly and Testing', 'd': 'Heating performance, detection jacks, timer functions, and electrical pulse output waveforms undergo complete operational verification.'}
{'t': 'Packaging and Dispatch', 'd': 'Devices are crated with required wear parts and accessories, with dispatch generally ready in about 6 days.'}
{'t': 'Handover and Training', 'd': 'Free remote video guidance ensures smooth commissioning, with optional operator training at our Tianjin factory facility.'}

Complete Setups

Solutions Built For This Buyer

TCM Physical Therapy Room

Fitting out a treatment room with fumigation, moxibustion, wax therapy, shock wave and electro-acupuncture from one supplier and one shipment.

Guides For This Audience

Product Guide

TCM Fumigation Therapy Equipment Guide

TCM fumigation combines thermal heating with herbal steam therapy to treat localized pain points and systemic conditions.

Buying Guide

Choosing a Moxibustion Therapy Device

Selecting between the RH-K-GJ models depends on whether your clinic requires wormwood fumigation alongside electro-optical...

Buying Guide

Electronic Acupuncture Stimulator Selection Guide

Procurement for outpatient TCM clinics and hospital acupuncture wards depends on simultaneous treatment capacity.

Questions Buyers Ask

Rehabilitation and Physiotherapy Centres FAQ

What is the standard lead time for therapy devices?

Orders are generally ready in about 6 days after payment is received via T/T, depending on the specific models and quantities.

Does the SDZ-III electronic acupuncture device come with needles?

The SDZ-III device does not include acupuncture needles. It is designed to be combined with standard acupuncture needles or surface electrodes in use.

What are the temperature characteristics of the RHL-I wax therapy device?

The wax operates with a melting point of 50 °C to 60 °C and a boiling point of 110 °C to 120 °C, offering high heat capacity and low thermal conductivity.

What electrical supply does the RHL-I wax therapy device require?

The standard RHL-I model operates on an AC 220 V 50 Hz power supply. Verify your department's voltage requirements during initial enquiry.

Which waveforms does the SDZ-III stimulator provide?

The SDZ-III provides 5 different output wave forms, each indicated by an illuminated symbol on the control panel when selected.

What certifications are provided for clinical procurement approval?

Huayan Medical manufactures under ISO 9001 and ISO 13485 management systems, and devices carry CE certification for clinical procurement files.

Sizing equipment for rehabilitation and physiotherapy centres

Tell us your volume, your local voltage and the space you have. We come back with a shortlist, a total power figure and a price within twelve hours.

Chat on WhatsApp Email a Quote Request See All Products