Wax Therapy Device RHL-I
The RHL-I is an automated wax therapy device designed to melt, filter, and maintain paraffin wax for physical therapy and TCM rehabilitation applications.
What the RHL-I Is Built To Do
The RHL-I is an automated wax therapy device designed to melt, filter, and maintain paraffin wax for physical therapy and TCM rehabilitation applications. Built for hospitals, rehabilitation centres, and therapy clinics, the unit accommodates 30 kg to 70 kg of wax with an initial melting time between 2 and 3 hours. Operating at 2600 W on an AC 220 V supply, it features a temperature setting range of 0 to 99 degrees Celsius with control accuracy of plus or minus 1 degree Celsius. An integrated automatic temperature regulation system holds the wax at 58 to 60 degrees Celsius for direct clinical use in wax cake, wax brushing, and wax dipping treatments.
Why Buyers Specify the RHL-I
- Holds 30 kg to 70 kg of paraffin wax to supply high-volume therapy schedules throughout the day
- Heats 30 kg of initial wax within 2 hours and 70 kg within 3 hours using 2600 W input power
- Automatic temperature control continuously maintains working wax between 58 and 60 degrees Celsius
- One-week parameter storage allows automatic scheduled on and off cycling without daily reconfiguration
- Stainless steel filter mesh and paraffin circulation system remove particulates from reused treatment wax
- Forced heating and manual stop buttons accommodate irregular clinic schedules without resetting programmed parameters
- Manual wax melting without automated controls leads to overheating risks above the safe clinical range
- Daily equipment setup and shutoff consumes staff time before and after scheduled patient appointments
- Impurities and debris accumulate in recycled clinical paraffin wax without an active filtration system
- Unscheduled or urgent therapy sessions stall when operators have to wait through full parameter reprogramming
- Moving heavy melted wax containers between stations causes workplace scald hazards and noise disturbance
- Temperature fluctuations disrupt the required 0.5 to 1.0 centimetre wax layer consistency during application
Where the RHL-I Is Used
Inside the RHL-I
- Melting temperature adjustment range from 0 to 99 degrees Celsius with accuracy of plus or minus 1 degree Celsius
- Automatic temperature control system that maintains liquid wax between 58 and 60 degrees Celsius
- Capacity rating from 30 kg to 70 kg with initial heating completed in 2 to 3 hours
- Integrated stainless steel filter mesh for wax purification during circulation
- Paraffin circulation filter device to maintain clean liquid wax throughout continuous operation
- Programmable one-week operational parameter memory supporting unattended automatic startup and shutdown
- Dedicated forced heating override and stop push-buttons for unscheduled clinical interventions
- Electric leakage protection device for operator and patient electrical safety
- Solid rubber caster wheels configured for quiet transport across clinical floors
Wax Therapy Device RHL-I Technical Data
Figures below are taken from the manufacturer data sheet for this model. Tell us your local voltage and dosing practice and we will confirm the build before the order.
| Model | RHL-I |
|---|---|
| Brand | Huayan Medical |
| Power supply | AC 220 V 50 Hz |
| Rated input power | 2600 W |
| Melting wax capacity | 30 kg to 70 kg |
| Melting temperature range | 0 to 99 degrees Celsius |
| Temperature control accuracy | ±1 degree Celsius |
| Constant wax temperature | 58 to 60 degrees Celsius |
| Initial melting time (30 kg) | ≤ 2 hours |
| Initial melting time (70 kg) | ≤ 3 hours |
| Filtration device | Stainless steel filter mesh |
| Dimensions | 870 mm x 460 mm x 700 mm |
How the RHL-I Is Built and Checked
- Set the operational parameters including timer and target melting temperature up to 99 degrees Celsius
- Melt 30 kg to 70 kg of paraffin wax in the chamber within 2 to 3 hours
- Liquid wax passes through the stainless steel filter mesh via the circulation device
- Automatic control circuit stabilizes the melted paraffin between 58 and 60 degrees Celsius
- Dispense melted wax into molds to form semi-solid wax pies or brush directly onto pain points
- Apply wax layer to patient skin at 0.5 to 1.0 centimetre thickness for a 30-minute treatment session
- Manufactured under ISO 9001 and ISO 13485 quality management systems
- Equipped with CE conformity marking for export into regulated healthcare markets
- Electric leakage protection circuit tested prior to packing and shipment
- Temperature control accuracy verified across 0 to 99 degrees Celsius before dispatch
Building the RHL-I To Your Practice
- Weekly automatic timer cycles configured to the clinical schedule of the receiving facility
- English language operation panel and operating documentation
- Direct factory spare parts supply including replacement filtration mesh
How the RHL-I Compares
An honest read on where this model wins and where another one suits you better.
Industries Using the RHL-I
Rehabilitation and Physiotherapy Centres
Rehabilitation departments adding fumigation, moxibustion, shock wave and wax therapy to existing treatment rooms.
TCM Health and Wellness Centres
Wellness centres running course-based herbal programmes and therapy sessions for self-paying clients.
TCM Clinics and Acupuncture Practices
Clinic owners with one dispensary corner and one member of staff, who still want patients leaving with pouches.
RHL-I Questions and Answers
How long does the RHL-I take to melt a full batch of wax?
What temperature does the device maintain during clinic hours?
What power supply is required to operate the RHL-I?
How does the machine clean recycled paraffin wax?
Does the unit need to be programmed every morning?
What warranty and replacement parts support is provided?
Other Models Worth Comparing
Guides That Help You Decide
TCM Fumigation Therapy Equipment Guide
TCM fumigation combines thermal heating with herbal steam therapy to treat localized pain points and systemic conditions.
Buying GuideChoosing a Moxibustion Therapy Device
Selecting between the RH-K-GJ models depends on whether your clinic requires wormwood fumigation alongside electro-optical...
Buying GuideImporting TCM Equipment Lead Time Payment and Support
Importing clinical TCM machinery begins by translating clinical prescription volume into machine specifications.
Ready to price the RHL-I
Send us your local voltage, your session volume and the space you have. A price and a full specification sheet for the RHL-I come back within twelve hours.