LED PIR Motion Sensor Bulb
LED PIR Motion Sensor Bulb is a motion sensor bulb specified for hallways, stairwells, garages and store rooms. This is the cheapest way to add occupancy control to a building.
What This Model Gives You
Against a time-delay stair switch
Detects presence continuously rather than counting down from a button press.
Against a separate PIR sensor wired to a standard bulb
No wiring, no second component and nothing to commission.
Against a plain LED bulb on a manual switch
Lights only when someone is present, which cuts running hours in circulation spaces.
Instruction sheet translated for your market
Specified at order stage rather than fixed by the catalogue, so the model can be matched to your market instead of the other way round.
Technical Data For LED PIR Motion Sensor Bulb
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| Bulb Video | Motion sensor bulb (PS:https://youtu.be/uoGq8dh6bow) |
|---|---|
| Motion Sensor Bulb Instructions | 1.Under the bright environment,the automatically is put out. |
How It Is Built
- 2.In the dark environment or night ,when people enter the detection zone the bulb will automatically bright.
- 3.Keep moving in the sensor range in low light,lamp will keep working.
Buyers This Model Suits
- Landlords and property managers
- Hardware and DIY retail buyers
- Facilities teams lighting circulation areas
- E-commerce sellers in home improvement categories
Application Scenarios
- Residential fit-out packages sold through electrical merchants
- Restaurant and bar interiors using Edison and filament shapes
- Hotel corridor and guest room lamp replacement programmes
- Retail shelf restocking under an importer's own brand
Objections This Model Removes
Sensor lights trigger in daylight and waste their life
Users assume a fault when the lamp self-checks on power-up
Hallway and stairwell lights get left on for hours
Adding occupancy sensing normally means an electrician and a separate sensor
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Infrared sensor module assembly and calibration
LED engine and driver integration
Body assembly and sensor lens fitting
Detection test through the full sequence before packing
What Gets Checked
- Hold-time behaviour test after the last detection
- Electrical safety and base retention test
- Detection range and angle verification
- Ambient light threshold calibration check
What You Can Change
- Colour temperature selected from the published options
- Own-brand packaging with printed instructions
- Instruction sheet translated for your market
- Base type selected at order stage
Certification
Our LED bulb line holds CE (LVD) and RoHS certificates issued by Shenzhen BST Technology, with the numbers published on our Trust page. Ask us in writing for the certification position on this specific model before you quote it into a regulated market - we will tell you what is held and what is not.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| A separate PIR sensor wired to a standard bulb | No wiring, no second component and nothing to commission |
| A plain LED bulb on a manual switch | Lights only when someone is present, which cuts running hours in circulation spaces |
| A time-delay stair switch | Detects presence continuously rather than counting down from a button press |
Getting It Right On Site
Expect the lamp to stay dark in a brightly lit room - that is the design
Allow 30 to 60 seconds after power-up for the infrared sensor to stabilise
One or two flashes on switch-on is the self-check, not a fault
Mount where movement crosses the detection zone rather than towards it
Other Models In LED Bulbs
8W RGBWW Bluetooth Smart LED Bulb
GU10 6W COB LED Spotlight
MR16 6W COB LED Spotlight
3W Vintage Edison LED Bulb E26 Model CRBU-360E-03
3W Vintage Edison LED Bulb E26 Model CRBU-360E-04
4W WWCW Smart WiFi LED Bulb
2W RGB Smart WiFi Glass LED Bulb
3W Ceramic LED Bulb 45x80mm
Guides That Cover This Product
How To Choose The Right LED Lamp Base For Your Market
E27, E26, B22, E14, GU10 and MR16 explained, with the export mistakes that cost importers money.
Buying GuideLumens Not Watts How To Compare LED Bulbs Properly
Why wattage stopped being a measure of brightness, and what to ask a supplier instead.
Buying GuideLED Colour Temperature Explained From 2400K To 6500K
What kelvin values actually mean, where each band belongs, and how to avoid a room full of returns.
Design GuideLED PIR Motion Sensor Bulb Questions
Why does the bulb flash when I switch it on?
That is the self-check. It needs roughly 30 to 60 seconds for the infrared sensor to stabilise before it works normally.
Will it come on during the day?
No. In a bright environment it stays off. It triggers on movement in a dark or low-light environment.
How long does it stay on?
It switches off roughly 30 to 60 seconds after movement stops within the detection range.
Which lamp bases can you supply on the bulb range?
Most models are offered in E27, E26 and B22. Candle, flame tip and the smaller filament shapes are offered in E14. The base options for each model are listed in its own specification table.
Are the bulbs dimmable?
It depends on the shape. The filament and candle ranges are listed as non-dimmable or dimmable and you choose at order stage. The smart WiFi and Bluetooth bulbs dim through their app or remote rather than through a wall dimmer.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For LED PIR Motion Sensor Bulb
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.