1.8W LED Filament Candle Bulb E14 180-230lm
Part number CRBU-360F-03
This is the LED filament lamp we hold for exposed pendants, festoon fittings and open decorative luminaires. It draws 1.8W and is specified at 180-230 lumens, with colour temperature 2700~3000K / 4000~4500K / 6000~6500K, a E14 base and a body of 35x118mm. The point of a filament LED is that it reads as a filament lamp from across the room. It is catalogued as CRBU-360F-03.
- Luminous Flux
- 180~230lm
- Lamp Base
- E14
- Color Temperature
- 2700~3000K / 4000~4500K / 6000~6500K
- Size
- 35*118mm
What This Model Gives You
360° beam angle
Beam angle is specified as part of the product rather than left as a surprise on site.
Colour rendering Ra>82
Colours under this light read closer to how they look in daylight, which matters wherever product or skin tone is on display.
Stated LED life of 50,000 Hours
A published life figure gives a maintenance interval you can plan replacement stock around.
Aluminum + Glass construction
The material is what gives the LED a heat path, and heat is what decides how long the product actually lasts.
180-230 lumens from 1.8W
Output and power are both published, so this model can be compared against anything else you are quoting instead of taken on trust.
Technical Data For 1.8W LED Filament Candle Bulb E14 180-230lm
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| P/N | CRBU-360F-03 |
|---|---|
| Light Source | Filament COB 2PCS |
| Luminous Flux | 180~230lm |
| Type | Non-dimmable |
| Input Voltage | AC:85~264VAC |
| Color Rendering Index | Ra>82 |
| Beam Angle | 360° |
| Size | 35*118mm |
| Color Temperature | 2700~3000K / 4000~4500K / 6000~6500K |
| Lamp Base | E14 |
| Material | Aluminum + Glass |
| Lamp Cover | Clear |
| Life Span | 50,000 Hours |
| Operating Temperature | -20°C to 45°C |
| Humidity | 10~85% / 1. |
| Application | Hotel, Conference Room, Exhibition Center etc. |
How It Is Built
- Light source: Filament COB 2PCS
- Electrical input: AC:85~264VAC
- Operating temperature: -20°C to 45°C
- Construction: Aluminum + Glass
- Global initial product, which breakthrough the regulations of LED linear lighting and light viewing angle up to 360°.
- The only product enjoys the same lighting and reflection effect to replace incandescent light.
- World astonishing 360° lighting and could improve the image of enterprise, shopping malls and stores.
Materials
- Aluminum
- Glass
Buyers This Model Suits
- Decorative lighting retailers
- Electrical distributors stocking exposed-lamp fittings
- Interior designers specifying visible lamps
- Hospitality and restaurant fit-out buyers
Application Scenarios
- Retail interiors with visible lamps
- Exposed pendant and festoon fittings
- Bar, cafe and restaurant interiors
- Open chandeliers and wall lights
Objections This Model Removes
Warm-only filament ranges cannot be used in commercial interiors
Small E14 filament lamps are sold on appearance with no published data
Filament-look lamps that only light forwards give themselves away in an open fitting
Decorative ranges are rarely offered with a dimmable option
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Filament strip preparation and mounting on the stem
Glass envelope sealing and gas filling
Driver assembly matched to dimmable or non-dimmable operation
Base crimping, burn-in and packing
What Gets Checked
- Dimming behaviour check on dimmable versions
- Photometric check against the published flux range
- Filament alignment inspection against the approved sample
- Envelope seal and pressure verification
What You Can Change
- Dimmable or non-dimmable driver
- Colour temperature from 2700-3000K, 4000-4500K or 6000-6500K
- Globe or candle shape
- E26, E27, B22 or E14 base
Certification
This model's part number falls inside the model range listed on our CE (LVD) and RoHS certificates, issued by Shenzhen BST Technology against EN 62560 and IEC 62321. Certificate numbers are published on our Trust page and scans are available on request.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| A traditional incandescent filament lamp | The same visual language at a small fraction of the energy, with a far longer service life |
| A vintage Edison lamp | Considerably more light output; choose Edison only when the amber decorative look is the objective |
| A conventional LED bulb with a diffuser | A genuine 360 degree distribution and a visible filament, which is what an open fitting needs |
Getting It Right On Site
Handle by the base rather than the glass during installation
Use these lamps where the bulb is visible; in a closed shade the look is wasted
Confirm whether the circuit is dimmed before choosing the driver version
Match colour temperature across every lamp in a festoon or cluster
Other Models In LED Filament Bulbs
Guides That Cover This Product
How To Choose The Right LED Lamp Base For Your Market
E27, E26, B22, E14, GU10 and MR16 explained, with the export mistakes that cost importers money.
Buying GuideLumens Not Watts How To Compare LED Bulbs Properly
Why wattage stopped being a measure of brightness, and what to ask a supplier instead.
Buying GuideLED Colour Temperature Explained From 2400K To 6500K
What kelvin values actually mean, where each band belongs, and how to avoid a room full of returns.
Design Guide1.8W LED Filament Candle Bulb E14 180-230lm Questions
How much light does the 1.8W version give?
180-230 lumens. Both the output and the power draw are published so you can compare this model directly against whatever else you are quoting.
Which lamp bases is this model available in?
E14. Tell us the destination market with your enquiry and we will quote the correct base.
What beam angle is this model?
360°. Beam angle is a separate part number in this range, so order the angle you need rather than adjusting on site.
Does this lamp light in all directions?
Yes. It is specified at a 360 degree beam angle, which is why it works in exposed fittings.
Can I get it dimmable?
On the globe shapes, yes. Say which version you need at order stage.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For 1.8W LED Filament Candle Bulb E14 180-230lm
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.