B2C Stores Recommend GU10 Bulb LED Wall Lamp
The FD-IW020X10 is a 10W LED wall lamp designed for commercial office and retail environments where a compact, durable wall-mounted fixture is needed. It uses five 2W Philips LED chips and is built with an aluminium body and acrylic diffuser for heat dissipation and even light distribution. The fixture is rated IP65, making it suitable for installation in areas with high humidity or occasional water exposure, such as restrooms, corridors, and service areas. It operates on AC85-265V, allowing direct connection to standard mains wiring without a driver. The design supports both surface mounting and recessed installation, and the slim profile fits flush against walls without protruding into walkways.
| Model | FD-IW020X10 |
|---|---|
| Power | 5*2W |
| Input Voltage | AC85-265V |
| IP Rating | IP65 |
| Dimension | 110 x 105 x 220 mm |
| Material | Aluminium+Acrylic |
| LED Chip | Philip |
| Driver | Dark Energy |
| Warranty | 3 Years |
Key Benefits
- IP65 rating allows installation in high-moisture areas like restrooms and corridors
- Five 2W Philips LED chips provide consistent, uniform lighting across the wall surface
- Aluminium body ensures effective heat transfer and long-term stability
- AC85-265V input eliminates the need for an external driver
- Slim 220mm depth fits flush against walls without obstructing walkways
- Acrylic diffuser reduces glare and provides even light distribution
Application Scenarios
- Lighting corridors and hallways in commercial office buildings
- Illuminating restrooms and service areas with high humidity
- Wall-mounted lighting in retail stores and B2C showrooms
- Backlighting wall panels or signage in office lobbies
- Installing in areas where recessed or surface-mounted fixtures are required
Who It Is For
- Commercial office project contractors specifying wall lighting for interior fit-outs
- Retail store owners sourcing fixtures for B2C showrooms
- Electrical wholesalers supplying lighting for office and retail projects
- Brand owners sourcing OEM wall lamps under their own label
Problems It Solves
- Standard wall lamps with low IP ratings fail in humid or wet areas
- Fixtures requiring external drivers increase installation complexity and cost
- Poor heat dissipation leads to early LED failure in enclosed wall mounts
- Glare from exposed LEDs causes discomfort in close-proximity office environments
- Lack of slim profile forces fixtures to protrude into walkways or interfere with wall features
Technical Features
- Five 2W Philips LED chips for consistent light output
- AC85-265V input for direct mains connection without a driver
- IP65 rating for protection against dust and water jets
- Aluminium body for heat dissipation and structural rigidity
- Acrylic diffuser for even light distribution and reduced glare
- Available for surface mounting or recessed installation
Materials
- Aluminium body for heat dissipation and structural strength
- Acrylic diffuser for even light spread and reduced glare
- Sealed joints and gaskets to maintain IP65 rating
Manufacturing Process
- Aluminium body machining and surface finishing
- Acrylic diffuser cutting and polishing
- LED board assembly with Philips chips
- Driver integration and electrical testing
- IP65 sealing and pressure test
- Aging test under power before packing
Quality Control
- Incoming inspection of Philips LED chips and Dark Energy drivers
- IP65 sealing check using pressure test before final closure
- Powered ageing test for 24 hours before packing
- Stated defective rate below 0.2%
Certification
Only the certification the factory publishes is listed here.
- CE certificate and report
- Stated conformity with CE, RoHS and FCC
Customisation Options
- Customer logo printing available, confirmed against an approved sample before production
- Available with or without driver, though this model has an integrated driver
- Surface or recessed mounting options based on site requirements
- OEM and ODM production for buyers selling under their own brand
Compared With the Alternatives
Wall lamp with external driver
Higher installation cost and complexity, but allows for separate driver replacement if needed
Plastic-bodied wall lamp
Less durable in high-traffic or humid areas, but lower initial cost
Recessed wall light with no IP rating
Not suitable for wet or high-moisture zones, but may have a lower profile
Use Guide
- Mount the fixture on a flat, stable wall surface with appropriate fixings
- Ensure the electrical connection matches AC85-265V input and is properly grounded
- Avoid installing in areas where the fixture will be directly exposed to high-pressure water jets
- Clean the acrylic diffuser periodically with a soft cloth to maintain light output
- Do not obstruct the air vents on the back of the fixture to ensure proper heat dissipation
B2C Stores Recommend GU10 Bulb LED Wall Lamp Questions
What is the input voltage for this wall lamp?
It operates on AC85-265V, which allows direct connection to standard mains wiring.
Is the driver included?
Yes. The driver is integrated into the fixture and does not require an external unit.
What does IP65 mean for this fixture?
IP65 means it is dust-tight and protected against water jets from any direction, suitable for humid or wet indoor areas.
Can it be installed in a bathroom or corridor?
Yes. The IP65 rating makes it suitable for use in restrooms, corridors, and other high-moisture indoor environments.
What is the warranty period?
This model carries a 3-year warranty. Across the FENGDIAN range, warranty varies from 2 to 5 years depending on the product.
Can I order a sample before placing a bulk order?
Yes. Sample orders are accepted, mixed samples are acceptable, and samples typically ship within 3-5 days.
How long does mass production take?
Mass production typically takes 1-2 weeks, and goods are shipped via DHL, UPS, FedEx, or TNT with 3-5 days in transit, or by air or sea freight.
Related Products
Remote Controller RGB DC24V LED Strip Light
View Specification
Designer Moon Shape LED Garden Light
View Specification
B2C Store Macaroon Colorful LED Surface Down Light
View Specification
24W High Quality Design LED Ceiling Light
View Specification
Hot Selling LED Garden Light B2C to Amazon Store
View Specification
6W DMX IP66 RGB RGBW DMX LED Point Light
View SpecificationRelated Guides
Request a Quotation for B2C Stores Recommend GU10 Bulb LED Wall Lamp
Send the quantity and the destination and we will quote against it. Samples from one piece, typically 3-5 days.