TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 1

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 2

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 3

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 4

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 5

Communication Wiring Harness

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs

An adapter harness with a German TAE-F 8P2C telephone plug on one end and an RJ45 male on the other. It lets equipment with standard network connectors work on German wall sockets without a converter block sitting on the floor.

Direct TAE-F to RJ45 conversion in one moulded assembly
Cat5e construction keeps the network side within the expected cable standard
One-piece harness replaces an adapter plus a patch lead
Moulded hoods keep the plug and cable joint rigid in wall sockets

Samples ship within 3 days of confirmation. Bulk lead time is typically 7 to 12 days.

Problems It Solves

Loose adapter blocks fall out of wall sockets and break the connection
Two-piece adapter chains add a failure point at every joint
Generic cords do not match the TAE keying and will not seat

Who It Is For

Networking hardware suppliers shipping into Germany
Installers working with TAE wall outlets
Distributors bundling region-specific cords

Application Scenarios

Router and modem installs on German telephone lines
Hotel and residential fit-out in TAE socket markets
Equipment exports into the German telephone standard

Technical Features

TAE-F 8P2C plug
RJ45 male connector
Cat5e cable construction
Moulded transitions both ends

Specifications

Connector A	TAE-F 8P2C plug
Connector B	RJ45 male
Cable	Cat5e
Application	German telephone network

Values shown are the standard build. Connector family, conductor gauge, circuit count and finished length are all build options.

Quality Control And Certification

Continuity And Circuit Verification. Verifies the physical arrangement sequence of the harness terminals and the circuit topology between them
Circuit Configuration Verification. Confirms that a complete, uninterrupted current flow path exists within each circuit
Terminal Retention Strength Test. Measures the mechanical reliability of the connection between the terminal and the wire
Ingress Protection Rating Test. Evaluates the dust and water resistance sealing performance of harness connectors

The company is certified to IATF 16949 and UL standards. Samples are confirmed prior to trial or mass production, and the approved sample is the reference for every repeat order.

Customization Options

Connector family and terminal type to your part numbers
Conductor gauge selected from the current per circuit
Finished length and breakout positions to your drawing
Jacket colour, marking and labelling to your scheme
Packing to your instruction, PE bag and carton as standard

Compared With The Alternatives

Separate adapter plus patch cord

One moulded harness removes the joint that usually works loose

Unkeyed generic plugs

A true TAE-F body seats and locks in the German socket

Use Guide

Check the TAE socket position, F for telephone, before plugging in
Do not force the plug if the keying does not align
Leave a small service loop at the wall so the plug is not side-loaded

Other Assemblies In Communication Wiring Harness

Cat5e RJ45 Male To Female Extension Harness - Garfour view 1

Communication Wiring Harness Cat5e RJ45 Male To Female Extension HarnessMoulded RJ45 male to female network extension harness View Specifications

RJ45 1 Male To 2 Female Network Splitter Harness - Garfour view 1

Communication Wiring Harness RJ45 1 Male To 2 Female Network Splitter HarnessMoulded one-to-two RJ45 splitter harness for shared network drops View Specifications

GX16 M12 6 Pin Waterproof Connector Cable Assembly - Garfour view 1

Communication Wiring Harness GX16 M12 6 Pin Waterproof Connector Cable AssemblyIP-rated 6-pin circular power and signal assembly built on GX16 M12 DJ7041-1.5-21 connectors View Specifications

RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 1

Communication Wiring Harness RJ11 6P4C Flat Telephone Cable AssemblyFlat 6P4C telephone cord assemblies for communication equipment and telephone cords View Specifications

Guides That Cover This Build

Material Guide

Choosing Between UL2464 UL2514 And UL1007 Cable

Three cable constructions that cover most harness work, and how to tell which one your application needs.

Comparison Article

Overmoulded Or Taped Breakouts On Harness Assemblies

Where a taped loom is the right answer, where it lets water in, and what overmoulding changes.

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs FAQ

Can you supply TAE-N versions as well?

Send the socket type and we build the matching plug body.

What cable length can we order?

Length is built to order. Send the run length with your quantity.

Is a sample confirmed before mass production of TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs?

Yes. Samples are confirmed prior to trial or mass production on every custom build, so the first production shipment is not the first time you see the part.

Can TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs be built to our own drawing?

Yes. We are open to OEM projects whenever you can provide a drawing or a physical sample, and the approved sample becomes the reference for repeat orders.

Where is the factory and can we visit?

Our factory is in Humen Town, Dongguan City, Guangdong Province, a 30 minute drive from Shenzhen International Airport. We welcome visits at any time.

Get A Price On TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs

Tell us the quantity, the finished length and any change to the connector set. We come back with the price, the lead time and a sample plan.

Chat On WhatsApp Email Our Engineers