RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 1

RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 2

RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 3

RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 4

RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 5

Communication Wiring Harness

RJ11 6P4C Flat Telephone Cable Assembly

A flat RJ11 6P4C telephone cable assembly for voice and low-speed communication equipment. The flat profile runs under carpet edges and behind wall trim where a round cable would sit proud, which is why it stays the default for telephone cords.

Flat profile routes cleanly along skirting and under desk edges
6P4C plugs match standard telephone and communication device jacks
3m standard length covers desk and wall-plate runs
Moulded strain relief survives repeated plug and unplug cycles

Samples ship within 3 days of confirmation. Bulk lead time is typically 7 to 12 days.

Problems It Solves

Round cords sit proud of trim and get pinched by furniture
Generic cords fail at the plug after a few hundred insertions
Wrong conductor count breaks two-line telephone systems

Who It Is For

Telecom equipment suppliers
Hospitality and office fit-out contractors
Device makers bundling a line cord

Application Scenarios

Telephone handsets and base units
Communication equipment with RJ11 line ports
Office and hospitality installs

Technical Features

RJ11 6P4C plugs both ends
Flat cable profile
3m standard length

Specifications

Connector	RJ11 6P4C
Cable	Flat telephone cable
Length	3m
Application	Telephone cords
Product Certificates	RoHS

Values shown are the standard build. Connector family, conductor gauge, circuit count and finished length are all build options.

Quality Control And Certification

Continuity And Circuit Verification. Verifies the physical arrangement sequence of the harness terminals and the circuit topology between them
Circuit Configuration Verification. Confirms that a complete, uninterrupted current flow path exists within each circuit
Terminal Retention Strength Test. Measures the mechanical reliability of the connection between the terminal and the wire
Ingress Protection Rating Test. Evaluates the dust and water resistance sealing performance of harness connectors

The company is certified to IATF 16949 and UL standards. Samples are confirmed prior to trial or mass production, and the approved sample is the reference for every repeat order.

Customization Options

Connector family and terminal type to your part numbers
Conductor gauge selected from the current per circuit
Finished length and breakout positions to your drawing
Jacket colour, marking and labelling to your scheme
Packing to your instruction, PE bag and carton as standard

Compared With The Alternatives

Round RJ11 cords

A flat cord lies under trim and carpet edges without a bulge

Coiled handset cords

A straight flat cord suits fixed wall to device runs instead of handsets

Use Guide

Press the latch fully until it clicks, then release so the retention tab seats
Avoid sharp folds in the flat cable, which crack conductors over time
Do not run alongside mains cabling for long parallel distances

Other Assemblies In Communication Wiring Harness

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 1

Communication Wiring Harness TAE F To RJ45 Cat5e Adapter Harness For German Telephone PlugsTAE-F 8P2C to RJ45 male network adapter harness for German telephone sockets View Specifications

Cat5e RJ45 Male To Female Extension Harness - Garfour view 1

Communication Wiring Harness Cat5e RJ45 Male To Female Extension HarnessMoulded RJ45 male to female network extension harness View Specifications

RJ45 1 Male To 2 Female Network Splitter Harness - Garfour view 1

Communication Wiring Harness RJ45 1 Male To 2 Female Network Splitter HarnessMoulded one-to-two RJ45 splitter harness for shared network drops View Specifications

GX16 M12 6 Pin Waterproof Connector Cable Assembly - Garfour view 1

Communication Wiring Harness GX16 M12 6 Pin Waterproof Connector Cable AssemblyIP-rated 6-pin circular power and signal assembly built on GX16 M12 DJ7041-1.5-21 connectors View Specifications

Guides That Cover This Build

Material Guide

Choosing Between UL2464 UL2514 And UL1007 Cable

Three cable constructions that cover most harness work, and how to tell which one your application needs.

Comparison Article

Overmoulded Or Taped Breakouts On Harness Assemblies

Where a taped loom is the right answer, where it lets water in, and what overmoulding changes.

RJ11 6P4C Flat Telephone Cable Assembly FAQ

What lengths do you make?

3m is the standard build. Other lengths are cut and moulded to order.

Can you colour the cable to our specification?

Yes. Jacket colour is selectable on custom runs.

Which markets do you already supply?

We take on client projects each year from the United States, the United Kingdom, Germany, France, Mexico and Japan, with the United States as our core market.

Do you accept small batch orders of RJ11 6P4C Flat Telephone Cable Assembly?

Yes. Small batch orders are accepted and quoted case by case. Our production lines are set up for small batch, multiple variety work rather than only long runs.

What quality system do you work to?

Dongguan JiaFu Automobile Accessories Co., Ltd is certified to IATF 16949 and UL standards, and harness testing covers continuity, circuit configuration, terminal retention strength and ingress protection rating.

Get A Price On RJ11 6P4C Flat Telephone Cable Assembly

Tell us the quantity, the finished length and any change to the connector set. We come back with the price, the lead time and a sample plan.

Chat On WhatsApp Email Our Engineers