Cat5e RJ45 Male To Female Extension Harness - Garfour view 1

Cat5e RJ45 Male To Female Extension Harness - Garfour view 2

Cat5e RJ45 Male To Female Extension Harness - Garfour view 3

Cat5e RJ45 Male To Female Extension Harness - Garfour view 4

Cat5e RJ45 Male To Female Extension Harness - Garfour view 5

Communication Wiring Harness

Cat5e RJ45 Male To Female Extension Harness

A moulded RJ45 extension harness that takes one male plug to a female coupler, used to extend a run or to bring a port out to a panel face. Overmoulding the transition removes the loose keystone coupler that normally dangles behind a desk.

Overmoulded body is stronger than a snap-together coupler
Male to female layout extends an existing run without re-terminating
Cat5e construction keeps the extension inside network cable spec
Panel-mountable female end can be fixed to an enclosure face

Samples ship within 3 days of confirmation. Bulk lead time is typically 7 to 12 days.

Problems It Solves

Keystone couplers pull apart under cable weight
Re-terminating a run in the field costs time and a tester
Unprotected ports on enclosure faces collect dust and damage

Who It Is For

Machine builders adding a service Ethernet port
IT and installation contractors
Equipment OEMs exposing a diagnostic port

Application Scenarios

Extending a network drop to a machine panel
Bringing an Ethernet port to the outside of an enclosure
Temporary network runs in workshops and events

Technical Features

RJ45 male to female
Moulded transitions
Cat5e cable
Extension builds available

Specifications

Connector	RJ45 male to female
Type	CAT5e
Construction	Moulded
Model Number	GF-M-0800265

Values shown are the standard build. Connector family, conductor gauge, circuit count and finished length are all build options.

Quality Control And Certification

Continuity And Circuit Verification. Verifies the physical arrangement sequence of the harness terminals and the circuit topology between them
Circuit Configuration Verification. Confirms that a complete, uninterrupted current flow path exists within each circuit
Terminal Retention Strength Test. Measures the mechanical reliability of the connection between the terminal and the wire
Ingress Protection Rating Test. Evaluates the dust and water resistance sealing performance of harness connectors

The company is certified to IATF 16949 and UL standards. Samples are confirmed prior to trial or mass production, and the approved sample is the reference for every repeat order.

Customization Options

Connector family and terminal type to your part numbers
Conductor gauge selected from the current per circuit
Finished length and breakout positions to your drawing
Jacket colour, marking and labelling to your scheme
Packing to your instruction, PE bag and carton as standard

Compared With The Alternatives

Inline keystone couplers

A moulded assembly has no snap joint to separate under load

New cable pull

An extension avoids pulling fresh cable through a finished install

Use Guide

Keep total channel length within the network standard when adding an extension
Support the female end mechanically rather than letting it hang on the cable
Check the link speed after install to confirm the channel still certifies

Other Assemblies In Communication Wiring Harness

RJ45 1 Male To 2 Female Network Splitter Harness - Garfour view 1

Communication Wiring Harness RJ45 1 Male To 2 Female Network Splitter HarnessMoulded one-to-two RJ45 splitter harness for shared network drops View Specifications

GX16 M12 6 Pin Waterproof Connector Cable Assembly - Garfour view 1

Communication Wiring Harness GX16 M12 6 Pin Waterproof Connector Cable AssemblyIP-rated 6-pin circular power and signal assembly built on GX16 M12 DJ7041-1.5-21 connectors View Specifications

RJ11 6P4C Flat Telephone Cable Assembly - Garfour view 1

Communication Wiring Harness RJ11 6P4C Flat Telephone Cable AssemblyFlat 6P4C telephone cord assemblies for communication equipment and telephone cords View Specifications

TAE F To RJ45 Cat5e Adapter Harness For German Telephone Plugs - Garfour view 1

Communication Wiring Harness TAE F To RJ45 Cat5e Adapter Harness For German Telephone PlugsTAE-F 8P2C to RJ45 male network adapter harness for German telephone sockets View Specifications

Guides That Cover This Build

Material Guide

Choosing Between UL2464 UL2514 And UL1007 Cable

Three cable constructions that cover most harness work, and how to tell which one your application needs.

Comparison Article

Overmoulded Or Taped Breakouts On Harness Assemblies

Where a taped loom is the right answer, where it lets water in, and what overmoulding changes.

Cat5e RJ45 Male To Female Extension Harness FAQ

Does this affect gigabit speed?

Keep the whole channel inside the Cat5e length limit and the link is unaffected. Send your run length if you are close to the limit.

Can the female end be panel mounted?

Yes. Tell us the panel cut-out and we build the matching flange version.

Do you charge for samples of Cat5e RJ45 Male To Female Extension Harness?

Samples are charged for the sample and the shipping. The cost and the timing are confirmed with your quotation before anything is built.

Is a sample confirmed before mass production of Cat5e RJ45 Male To Female Extension Harness?

Yes. Samples are confirmed prior to trial or mass production on every custom build, so the first production shipment is not the first time you see the part.

Can Cat5e RJ45 Male To Female Extension Harness be built to our own drawing?

Yes. We are open to OEM projects whenever you can provide a drawing or a physical sample, and the approved sample becomes the reference for repeat orders.

Get A Price On Cat5e RJ45 Male To Female Extension Harness

Tell us the quantity, the finished length and any change to the connector set. We come back with the price, the lead time and a sample plan.

Chat On WhatsApp Email Our Engineers