Wind Jets
Aluminium Windjet Nozzle
An aluminium windjet nozzle directs a focused, high-velocity air stream across a surface to remove debris, dry components, or cool parts after a wash. This CNSS model is designed for light-duty air blowing in industrial cleaning, drying, and cooling lines where weight and cost are factors, and where the air stream must be consistent and non-corrosive. The 1/4 inch BSPT thread allows direct mounting on standard piping without adapters.
| Material | Aluminium |
|---|---|
| Thread Size | 1/4″ BSPT |
Dimensions and materials outside this table are confirmed against your duty sheet before quotation.
Key Benefits
What This Nozzle Gives You
- Lightweight aluminium body reduces system load and installation effort
- 1/4 inch BSPT thread fits standard air line fittings without adapters
- Polished finish resists surface oxidation in dry air service
- Flat nozzle design delivers a uniform air curtain across the target width
- No internal moving parts to wear or fail under normal operation
- Free trial samples available to test air flow pattern and force before bulk order
Application Scenarios
Where It Is Installed
- Drying parts after a parts washing or surface treatment cycle where water residue must be blown off quickly
- Clearing dust or fine particles from conveyor belts, machined surfaces, or packaging lines
- Cooling hot components after heat treatment or forming processes
- Removing debris from electronic assemblies or printed circuit boards
- Supporting air knife systems in packaging or material handling lines
Who It Is For
Buyers Who Specify It
- Maintenance teams replacing worn air nozzles on existing drying or cleaning lines
- OEM machine builders integrating air blowers into new equipment designs
- Process engineers specifying air nozzles for low-pressure, non-corrosive air systems
- Facility managers seeking lightweight, low-cost air nozzles for temporary or auxiliary lines
- Distributors stocking air nozzles for industrial maintenance and repair use
Problems It Solves
What It Fixes on the Line
- Heavy brass or stainless steel nozzles increasing system weight and mounting stress
- Thread mismatch between nozzles and existing air lines requiring adapters
- Corrosion or pitting in non-aluminium nozzles exposed to humid or wet air
- Long lead times for custom air nozzles delaying line maintenance or commissioning
Technical Features
How It Is Built
- One piece aluminium body with no internal parts to fail
- Flat air outlet design produces a consistent, uniform air curtain
- Male threaded connection with 1/4 inch BSPT thread for direct pipe fitting
- Engraved size markings for easy identification during installation or replacement
- Polished surface finish reduces air turbulence and surface drag
- No internal filters or strainers required for clean compressed air service
Materials
Body Materials and Where Each One Suits
- Aluminium body suitable for dry, non-corrosive compressed air service
- Polished finish resists surface oxidation in moderate humidity environments
Manufacturing Process
How the Part Is Made
- Material selection based on the duty and air environment
- Machining of the body and nozzle orifice
- Inspection of thread size and alignment
- Final testing of air flow pattern and consistency
- Packaging and shipment
Quality Control
What Is Checked Before It Ships
- Raw material is selected from approved aluminium stock
- Every product is tested before shipping
- Quality controlled at material selection, manufacturing, inspection, packaging and transportation
- A 3 month quality guarantee is stated on the product listing
Customization
What Can Be Changed to Suit You
- Standard and non-standard parts can be customised to drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial installations
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| Brass windjet nozzle | Aluminium is lighter and less expensive, but brass offers better wear resistance in high-impact or abrasive air service |
|---|---|
| Stainless steel windjet nozzle | Stainless steel is more durable in corrosive or high-temperature environments, but aluminium is sufficient for dry, low-pressure air lines |
| Plastic windjet nozzle | Plastic is lighter and cheaper, but aluminium offers better strength and heat dissipation in continuous operation |
| Air knife with filter | The filtered version protects against particulates in dirty air lines, but the aluminium windjet is suitable for clean compressed air only |
Use Guide
Fitting and Running It
- Confirm the air pressure and flow rate at the nozzle location before selecting the model
- Ensure the 1/4 inch BSPT thread matches the existing pipe or fitting
- Align the nozzle so the air stream is perpendicular to the target surface
- Check for obstructions or debris in the air line that could affect flow
- Inspect the nozzle face for wear or deformation if the air stream weakens
- Use only in dry, clean air service to avoid internal corrosion
Questions Buyers Ask
Aluminium Windjet Nozzle Questions
What is the material and thread size of this windjet nozzle?
The aluminium windjet nozzle is made from aluminium with a 1/4 inch BSPT thread. Confirm the air pressure and duty before use.
Can I get a sample before placing a production order?
Yes. Trial samples can be sent free of charge and are ready within 10 days.
Do you accept OEM orders and small volume purchases?
Yes. Small volume orders are accepted, and standard or non-standard nozzles can be made to your drawing under an OEM order.
What is the quality guarantee for this product?
A 3 month quality guarantee is stated on the product listing. Send the nozzle photo and service conditions by email for assessment.
What are the payment terms?
The product listing states T/T 100% in advance. Send the model, quantity, and destination port by email to confirm the terms.
Is this nozzle suitable for high-pressure or abrasive air?
This aluminium windjet nozzle is intended for dry, clean compressed air at moderate pressure. It is not recommended for high-impact or abrasive service.
Can I use this nozzle in a wet or humid environment?
The aluminium body resists surface oxidation in moderate humidity, but it is not designed for continuous exposure to moisture or condensation.
Related Products
Others in the Wind Jets
Go Deeper
Industries Guides and Ways to Order
Ask About Aluminium Windjet Nozzle
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.