Wind Jets
Air Nozzle
An air nozzle directs a focused stream of compressed air to remove dust, debris, or moisture from a surface, which is essential in cleaning conveyor belts, drying parts after rinsing, or clearing blockages in narrow channels. This CNSS air nozzle range is designed for consistent airflow delivery in industrial cleaning and drying lines, with a body made from durable plastic suitable for dry air service.
No published specification table exists for this listing. Send the duty and the thread on your header and we will confirm the size, pattern and material by email.
Key Benefits
What This Nozzle Gives You
- Delivers a concentrated airflow to clear dust and debris without water or chemicals
- Plastic body resists corrosion in dry, non-abrasive environments
- Eight vertical slots provide even air distribution across the target width
- Threaded connector allows secure mounting on existing air lines
- Compact design fits into tight spaces where larger nozzles cannot reach
- Free trial samples available to test airflow pattern and mounting fit
Application Scenarios
Where It Is Installed
- Cleaning conveyor belts in a textile workshop where moisture must be avoided
- Drying parts after a rinse cycle in a metal finishing line
- Clearing dust buildup in narrow channels or between stacked components
- Removing loose particles from surfaces before painting or coating
- Clearing blockages in small-diameter pipes or ducts using a focused air blast
Who It Is For
Buyers Who Specify It
- Maintenance teams replacing worn air nozzles on cleaning or drying lines
- OEM machine builders integrating air nozzles into automated handling systems
- Plant engineers specifying air nozzles for dust control in dry processing areas
- Facility managers upgrading cleaning systems to reduce water usage
- Installers of fog and mist systems needing air assist for droplet dispersion
Problems It Solves
What It Fixes on the Line
- Inconsistent airflow that leaves residue in corners or along edges
- Nozzle blockage from debris due to poor internal design or material
- Mounting issues from mismatched thread standards or lack of secure fit
- Excessive air consumption from poorly directed or scattered airflow
- High maintenance frequency due to frequent nozzle failure in dry service
Technical Features
How It Is Built
- Eight vertical slots for even air distribution across the target width
- Threaded connector for direct attachment to standard air lines
- One piece plastic body with no internal parts to loosen or wear
- Mounting hole allows secure positioning on fixtures or panels
- Compact profile fits into confined spaces without obstructing movement
- Designed for dry compressed air service with no liquid or particulate carryover
Materials
Body Materials and Where Each One Suits
- Plastic body suitable for dry compressed air service
- Threaded connector compatible with standard industrial air fittings
Manufacturing Process
How the Part Is Made
- Material selection based on the duty of dry air service
- Machining of the body and slot pattern
- Inspection of slot alignment and airflow path
- Packaging for safe transport
- Final inspection before shipment
Quality Control
What Is Checked Before It Ships
- Raw material is selected from approved plastic types suitable for dry air service
- Every process from material selection to transportation is controlled
- Every product is tested before it ships
- A 3 month quality guarantee is given on the product
Customization
What Can Be Changed to Suit You
- Standard and non-standard nozzles can be made to drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial installations
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| Full cone nozzle | A full cone disperses air in a circular pattern, which is better for cooling or mixing, but not suitable for focused cleaning of a linear surface |
|---|---|
| Hollow cone nozzle | A hollow cone provides a ring of air, useful for cooling or drying a cylindrical surface, but not effective for clearing debris from a flat or narrow target |
| Spiral nozzle | A spiral nozzle is designed for high-velocity air with solids handling, but its complex internal structure is unnecessary for simple cleaning tasks |
| Flat fan air nozzle | A flat fan delivers a wide, even air curtain, which is better for large surface cleaning, while this air nozzle is optimized for focused, narrow clearance |
Use Guide
Fitting and Running It
- Confirm the target width and standoff distance before selecting the nozzle
- Ensure the thread size matches the existing air line connection
- Position the nozzle so the eight slots are aligned with the area to be cleaned
- Check for obstructions in the air line that could affect flow
- Inspect the nozzle for wear or clogging if airflow appears uneven
- Use a filter on the air line if the supply contains particulates
Questions Buyers Ask
Air Nozzle Questions
What is the body material of this air nozzle?
The body is made from plastic suitable for dry compressed air service. Confirm the exact material against your duty sheet or drawing.
Can I get a sample before placing a production order?
Yes. Trial samples can be sent free of charge and are ready within 10 days.
Do you accept OEM orders and small volume production?
Yes. Small volume orders are accepted, and standard or non-standard nozzles can be made to your drawing under an OEM order.
What is the airflow pattern of this air nozzle?
The nozzle has eight vertical slots that deliver a focused, even airflow across the target width. The exact pattern is confirmed on enquiry.
What are your payment terms?
The product listings state T/T 100% in advance. Send the model, quantity and destination port by email and we will confirm the terms for your order.
What happens if the nozzle fails in service?
A 3 month quality guarantee is given on the product. Send us the nozzle photo and the service conditions by email and we will assess the wear pattern.
Is this nozzle suitable for wet or high-pressure air?
This nozzle is designed for dry compressed air service. Confirm the duty sheet or drawing for suitability in wet or high-pressure environments.
Related Products
Others in the Wind Jets
Go Deeper
Industries Guides and Ways to Order
Ask About Air Nozzle
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.