Seven guides covering the pole and pile process, the standards that govern them, rebar and cage making, plant information systems and how to specify a line before the factory exists.
Every stage of the pole process feeds the next one. This guide follows a pole from the mixing station to the stock yard and explains what decides the
Read the guide
A pretensioned spun concrete pile follows the pole process closely until demoulding, then adds the stages that give PHC piles their strength. Knowing
Read the guide
Zino has delivered both. The right answer depends on labour cost, output target and how quickly the plant has to be running, not on which line is more
Read the guide
Zino sends the relevant standards documents to the end user with every turnkey line, so the plant works to the current version from the first casting.
Read the guide
The cage is the part of a pole or pile that a buyer never sees and an engineer never stops thinking about. Material shape, diameter and cut length dec
Read the guide
Industry 4.0 is easy to say and hard to see on a casting floor. In a pole or pile plant it means feedback nodes at each process section, live material
Read the guideMost first time plant investors start by asking for an equipment price. The more useful starting point is the output you have to hold, the building yo
Read the guideSend it by email. Answers come from the engineers who design and commission the lines.
