Carbide Pegs for Bead Mills
Solid carbide and steel-welded carbide pegs made to your drawing for bead mills handling low to highly viscous materials with consistent dispersion and milling performance.
Carbide Pegs for Bead Mills Catalogue
Problems This Family Solves
- Steel pegs wear quickly in high-viscosity or abrasive bead mill environments
- Inconsistent peg geometry leads to uneven particle distribution and reduced milling efficiency
- Non-standard peg sizes are difficult to source with repeatable dimensions
- Welded carbide pegs with poor bonding fail under thermal or mechanical stress
- Lack of pre-testing samples increases risk of ordering incorrect geometry or material
Who Buys These Parts
- Bead mill manufacturers specifying wear-resistant pegs for high-viscosity applications
- Chemical and pharmaceutical producers replacing worn pegs in continuous milling systems
- R&D teams testing new peg designs for improved dispersion in lab-scale bead mills
- Maintenance teams replacing pegs in existing bead mills with known wear patterns
- Contract manufacturers producing bead mill components under OEM or ODM terms
Why These Parts Hold Up
- Solid carbide pegs and steel-welded carbide pegs available for different wear and load conditions
- Made to customer drawing with consistent geometry and repeatable dimensions
- All orders tested for physical properties, shape and tolerance before bulk production
- Inspection photographs sent to buyer for confirmation before delivery
- Stock items ship 3-5 days after payment is received; custom items quoted with lead time
Typical Applications
- Pegs used in bead mills for pigment dispersion in paints and coatings
- Carbide pegs in high-viscosity polymer processing applications
- Steel-welded carbide pegs in mills handling abrasive or corrosive materials
- Custom pegs made to match existing wear patterns in a production bead mill
- Replacement pegs for mills where consistent particle size distribution is critical
Industries That Use Carbide Pegs for Bead Mills
Pressed Sintered and Ground In House
Weighing In of Ingredients
Tungsten carbide powder and cobalt binder weighed to the grade formula.
Milling
Powders wet milled so the binder is evenly distributed through the mix.
Spray Drying
The slurry is spray dried into free-flowing granules that press consistently.
Testing
Granulate checked before it is committed to a press run.
Forming
Blanks pressed on imported presses from the mould for that part.
Sintering
Sintered at around 1450 degrees C in an over-pressure furnace to close porosity.
Machining
Ground and finished to the dimensions on the drawing.
Quality Control
Physical properties, shape and tolerance checked, then inspection photographs sent before delivery.
Carbide Pegs for Bead Mills FAQ
Can you make pegs to my own drawing?
Yes. OEM and ODM services are available. Send your drawing and we will produce the pegs to your specifications.
How long is the lead time?
Stock items ship 3-5 days after payment is received. Customised items are given a delivery time in the quotation.
Can I test a sample before ordering in bulk?
Yes. Samples are available for pre-testing. Contact us with your drawing and service conditions to request a sample.
How are parts checked before shipping?
All orders are tested for physical properties, shape and tolerance before shipping. Inspection photographs are sent for confirmation before delivery.
Are you a manufacturer or a trading company?
A manufacturer in Zhuzhou, Hunan Province, China, producing tungsten carbide parts for over 15 years.
What is your warranty policy?
We offer a 100% satisfaction guarantee. If there is a quality issue with overseas orders, provide photos by email and we will replace the parts at our cost.
Do you supply solid carbide or steel-welded carbide pegs?
Both types are available. Solid carbide pegs offer uniform hardness and wear resistance. Steel-welded pegs provide a cost-effective option with carbide working surface.
Related Product Families
Solid Carbide End Mills
Solid carbide end mills produced from raw carbide rods, designed for high-speed milling with high…
Tungsten Carbide Bushes and Sleeves
Pressed and sintered carbide bushes, shaft sleeves, valve cores and valve seats made to your…
Tungsten Carbide Rods
Pressed and sintered tungsten carbide rods made to your drawing or standard size for use in drill…
Tungsten Carbide Nozzles
Pressed and sintered tungsten carbide nozzles made to drawing for high-wear, high-temperature, and…
Quote Carbide Pegs for Bead Mills
Send the drawing or the dimensions with the service conditions and you will get a grade recommendation alongside the price.