1-1/2 Inch Triangle Buckle in Light Antique Brass
A zinc alloy triangle buckle at 1-1/2 inch inner width, or customised, finished in light antique brass. Light antique brass is a softer, warmer tone than full antique brass and is used where the hardware should read as aged rather than dark.
Finished in light antique brass, a warmer tone than the standard antique finish.
| Size | 1-1/2” or customized |
|---|---|
| Material | Zinc alloy |
| Finishes | Light antique brass |
| Typical Use | Bag, purse |
Problems It Solves
- Anchoring 38 mm webbing to a small leather tab needs a shape that narrows the load path
- A rectangle ring at a strap end leaves the webbing free to shift sideways
- Sharp apex corners on cheap triangles chafe the lining they sit against
Key Benefits
- The apex concentrates the pull into one point, which suits a hook or a swivel
- Wide base keeps the webbing flat where it enters the buckle
- Rounded apex so the ring does not mark the panel behind it
Application Scenarios
- Strap ends that clip to a snap hook
- Backpack yoke junctions where webbing meets a single anchor
- Decorative trim on tote and bucket bag straps
Who It Is For
- Bag factories converting wide webbing to a single hook point
- Backpack makers building yoke and harness junctions
- Fashion brands using the triangle as a visible trim detail
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Die cast zinc alloy with an even section on all three sides
- Inner width quoted across the base, which is the webbing dimension
- Apex radius polished before plating
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Quote the size by base inner width, since that is what the webbing has to pass
- Keep the apex facing away from the body panel to avoid marking it
- Match the plated colour to the hook that clips into the apex
| Compared with | What changes |
|---|---|
| Rectangle ring | A rectangle ring keeps the strap the same width, while a triangle narrows it to one anchor point |
| D ring | A D ring needs a sewn tab, while a triangle takes the full webbing width directly |
Related Reading
Industries
Solutions
Other Items in Triangle Buckles
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
Is the Size Measured Across the Base or the Height
Across the base inner width, because that is the dimension your webbing has to pass through.
Ask for a Sample of the 1-1/2 Inch Triangle Buckle in Light Antique Brass
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.