Personal Care

JP-01 Oral Spray

Model JP-01

JP-01 is a compact oral spray unit - a pocket-format device for cleaning between teeth after meals, sold both on its own and as a companion SKU inside an oral care range.

Pocket-format oral spray unit
Companion SKU to a toothbrush range
Sold standalone or in gift sets

ISO 9001:2015Sample in 1-5 daysReply in 1 hourOEM and ODM

Key Benefits

Pocket-format oral spray unit
Companion SKU to a toothbrush range
Sold standalone or in gift sets

Who It Is For

Oral care brands launching a good-better-best line-up
Beauty brands adding a device to a skincare or cosmetics range
Pharmacy and drugstore private-label buyers
Subscription and e-commerce brands needing a refill-head ecosystem

Problems It Solves

Brush-head interfaces that are not shared across models force a second refill SKU
Waterproofing that passes a spray test but fails a real bathroom
Battery-operated and rechargeable versions of the same model looking like two products
Beauty devices bought from a different factory that do not match the oral care range

Specification

Technical Data For The JP-01 Oral Spray

Everything below is published for this model. Where a figure is not listed we will confirm it in writing rather than estimate it.

The published specification sheet for this model is supplied on request. Send the model number and we will return the full datasheet with carton data in the same reply.

Request The Datasheet

Materials

Handle housing	Moulded thermoplastic with a sealed joint at the head interface
Brush filaments	Nylon bristle, supplied on the refill head
Seals	Elastomer seals at the head and charge interfaces
Finish	Colour and soft-touch surface treatments applied in the factory

Application Scenarios

Retail oral care ranges - A price ladder from a battery-operated entry model to a sonic premium handle, all taking the same refill heads within their family.
Pharmacy and drugstore private label - The entry oscillating handles, where landed cost is fixed and the unit still has to be genuinely usable.
Beauty and skincare ranges - The facial cleansing brush and the LED makeup mirror as a device extension to a cosmetics line.
Hotel amenity travel retail and gifting - The battery-operated model and the compact sprays, where no charge base means lower cube and lower cost.

How It Is Made

Manufacturing Process And Quality Control

Incoming inspection

Raw materials are tested for physical and chemical performance and supplier quality is recorded before anything reaches the line.

SMT and wave soldering

Control boards are populated on our SMT line and through-hole parts are wave soldered in house.

PCBA testing

100 percent PCBA testing before the board goes into an assembly.

Assembly

Assembly on dust-free automatic lines with a QC station at every process step.

Aging test

100 percent aging testing on finished assemblies before packing.

Packing and warehouse QA

Automatic packing, then a warehouse inspection of the packed goods before delivery.

Quality Control

IQC - Incoming Quality Control: Tests the physical and chemical performance of every raw material and records supplier quality. Materials that meet the standard go to the warehouse; those that do not are rejected.
IPQC - In-Process Quality Control: QC stations are set up at every process step on the line so that a defect is caught at the station that created it rather than at final assembly.
FQC - Final Quality Control: Finished goods are inspected to the AQL standard, or 100% inspected when the programme calls for it.
QA - Quality Assurance: Wear, tear and misuse testing, plus a warehouse inspection of the packed goods before delivery.

Certifications

Manufactured under an ISO 9001:2015 certified quality system. Product-level certification is arranged per programme and per destination market - tell us the markets and we will confirm what is held and what needs to be applied for.

Customisation

What Can Be Changed On This Model

Colour and finish	Moulded colour, wood grain, crack and solid finishes on the existing tool.
Logo and printing	Logo printing and key legends applied in the factory before packing.
Colour box artwork	Retail packaging printed to your artwork so goods land retail-ready.
Trim parts	Trim rings, light diffusers and small cosmetic parts changed at low tooling cost.
Main housing	New housing tooling where the silhouette itself has to carry the brand.
Carton configuration	Pieces per carton adjusted for the programme, with carton size and weight reconfirmed.

Use Guide

How It Is Used

Charge or fit batteries

Charge the handle fully before first use, or fit batteries on the battery-operated model.

Fit the head

Push the refill head onto the interface until it seats.

Use

Two minutes, twice daily, is the normal instruction to print on retail packaging.

Rinse

Rinse the head and the handle joint after use and stand the handle upright to dry.

Replace the head

Replace the refill head on the schedule your brand specifies.

Comparison

How The JP-01 Compares With The Rest Of The Range

Model	Code	Key figure	Positioning
JP-01 Oral Spray	JP-01	See page	Pocket-format oral spray unit
TB-10 and TB-20 Oscillation Electric Toothbrush	TB-10 / TB-20	See page	Two models on one oscillating platform
TB-16 Oscillation Electric Toothbrush	TB-16	See page	Slim oscillating handle for travel and smaller hands
TB-06A Oscillation Electric Toothbrush	TB-06A	See page	Entry oscillating handle for volume programmes
TB-01 Battery Operated Oscillation Toothbrush	TB-01	See page	Battery operated - no charge base, no charging circuit
TB-09 Electric Toothbrush	TB-09	See page	Rechargeable everyday handle

Talk To Someone Who Builds This Product

Send the model, the quantity and the market. You get an answer within 1 hour, and a sample in 1-5 days.

Chat On WhatsApp Email Us

FAQ

JP-01 FAQ

Is this product available for OEM and private label?

Yes. Colour, finish, logo printing and colour box artwork are applied in the factory. New housing tooling is available where the silhouette itself has to carry the brand.

How long does a sample take?

Samples are prepared in 1-5 days and sent for your confirmation before mass production starts.

Can we inspect before shipment?

Yes. We welcome customers to check mass-production goods before delivery.

What quality checks does this product go through?

Incoming quality control on materials, in-process quality control at every process step, final quality control to the AQL standard or at 100 percent, and a quality assurance inspection of the packed goods in the warehouse. Raw material testing, PCBA testing and aging testing are carried out at 100 percent.

How is it shipped?

By air with DHL, FedEx, UPS, TNT or another carrier of your choice, normally 3 to 7 days to destination, or by sea under FOB conditions from Xiamen.

What happens if there is a problem with the shipment?

You can ask to return goods within 30 days of receipt. If the cause is ours we carry the cost and replace the product as soon as we can. Every shipment carries a 1 year quality guarantee.