Concave Mirror for Garden Decoration
A concave mirror for garden decoration is forged from 304 stainless steel into a curved reflective surface and...
View Details
Stainless Steel Sculpture
Stainless Steel Pebbles
Stainless steel pebbles are forged from 304 stainless steel into smooth rounded forms and polished to a mirror finish. They are designed to be placed in clusters across lawns, plazas or shallow water features, where they blend into the landscape by reflecting the sky and surrounding planting instead of standing out as a separate object. Each piece is built to the buyer's landscape layout drawing, allowing variation in size and curvature within a cluster to match natural stone patterns.
| Material | 304 stainless steel |
|---|---|
| Forming | Hand forged and welded from plate |
| Standard Finish | Mirror polish |
| Alternative Finishes | Brushed satin, colour electroplating, baked lacquer |
| Typical Use | Park landscape and water system landscape |
| Sizes | Built to the buyer layout drawing |
| Category | Stainless Steel Sculpture |
| Made In | Pingshan District, Shenzhen, China |
Key Benefits
- Mirror polished 304 stainless steel reflects the sky and planting, so the pieces integrate into the landscape rather than contrast with it
- Forged from plate rather than cast, so large pieces remain light enough to install without heavy lifting equipment
- Closed rounded forms have no sharp edges, which suits public spaces used by children and pedestrians
- Suitable for permanent installation in water features where painted or coated finishes would degrade
- Cluster sizes and quantities are built to your layout drawing instead of a fixed catalogue size
Application Scenarios
- Park lawns and pathway edges where a sculpture group replaces conventional planting beds
- Water system landscape such as shallow pools, stream edges and fountain surrounds
- Hotel entrance courtyards and drop off areas that need a low non-blocking feature
- Shopping mall atriums and roof gardens where a low sculpture group breaks up a hard floor
- Residential development landscape zones and show garden areas
Who It Is For
- Landscape architects specifying sculptural elements for public parks and waterside schemes
- Property developers dressing entrance landscapes and show gardens before handover
- Hotel and resort buyers sourcing outdoor decoration that survives rain and cleaning
- Municipal parks departments replacing planting beds with low maintenance features
- Art consultants assembling a coordinated set of pieces across one site
Problems It Solves
- Painted or coated outdoor decoration chalks and peels after a few seasons near water while polished stainless steel does not
- Natural boulders of matching shape are hard to source in quantity and heavy to place on a finished landscape
- Standard catalogue sculpture rarely fits a drawn cluster layout, leaving gaps the landscape drawing did not intend
- Freight cost on solid stone or cast pieces of this size is often higher than the piece itself
- Cleaning is a recurring cost on textured outdoor pieces while a mirror surface wipes down
Technical Features
- Body forged and welded from 304 stainless steel plate, then ground and mirror polished
- Seamless appearance with weld lines dressed back before the final polish
- Hollow forged construction keeps weight per piece low relative to size
- Base plate or ground spigot fixing detailed to the site condition
- Finish options include mirror polish, brushed satin, colour electroplating and baked lacquer
Materials
- 304 stainless steel plate for the forged body and the fixing detail
- Stainless steel welding consumables matched to the parent plate so the polish stays even
Quality Control
- Formed shape checked against the approved drawing before welding
- Weld seams inspected and dressed until they disappear under the polish
- Polished surface checked under light for grinding marks and orange peel
- Protective film applied to every polished face before crating
Customization Options
- Any pebble size and any number of pieces in a cluster to your drawing
- Mirror, brushed, colour plated or baked lacquer finish per piece or per cluster
- Fixing detail adapted to lawn, paving, planter or shallow water installation
- Sample piece produced for approval before a full cluster goes into production
Use Guide
- Send the landscape layout drawing with pebble positions and intended sizes marked
- Confirm whether pieces sit on lawn, on paving or in water, as the fixing detail differs
- Leave the protective film in place until the surrounding landscape work is finished
- Clean with water and a soft cloth and do not use abrasive pads on a mirror surface
- Re-polish locally if a piece is scratched during site work rather than replacing it
Manufacturing Process
How This Piece Is Made
- Review of the landscape layout drawing and agreement of the cluster sizes
- Plate forming data calculated for each pebble before any steel is cut
- Hand forging of the plate into the rounded pebble form
- Welding of the closed body and dressing back of the weld lines
- Grinding through successive grits followed by mirror polishing
- Fixing detail welded on, protective film applied and crating for export
Every stage happens in the same workshop in Pingshan, Shenzhen, which is why a set of pieces arrives matching.
Comparison
How It Compares With the Alternatives
Compared with Natural stone bouldersStone is cheaper per piece but far heavier to place, and matching shapes across a cluster is difficult
Compared with Cast copper pebblesCast copper develops a patina that some schemes want, but it is heavier and costs more at this size
Compared with Painted carbon steelPainted steel gives any colour at a lower price, but needs repainting outdoors and will rust at any chip
Compared with Resin imitation stoneResin is the lightest option, but it fades under sunlight and cannot take a mirror finish
Where This Piece Is Used
Urban Public Art and LandscapeApplication notesCommercial Property and RetailApplication notesDesigners and Art ConsultantsApplication notesMountain and Wolves Landscape InstallationProject notesForged Stainless Steel Giant MushroomsProject notesChoosing Stainless Steel for Outdoor SculptureMaterial GuideFrom Drawing to Installed SculptureProcess GuideMaintaining Outdoor Metal SculptureMaintenance Guide
Related
More From Stainless Steel Sculpture
Polished Garden Sculpture
A mirror polished stainless steel outdoor sculpture designed as a large-scale garden feature. The form is based on a...
View Details
Big Flower
A large scale stainless steel flower sculpture based on the Bauhinia flower form, forged from 304 stainless steel...
View Details
Furnishing Articles
Stainless steel branch bird sculptures are forged from 304 stainless steel plate into organic, flowing forms that...
View DetailsFAQ
Stainless Steel Pebbles Questions
What material are the pebbles made from?
They are forged from 304 stainless steel plate and then mirror polished. 304 is the grade used because it holds a polish and stands up to rain and pool water.
Can you make them in the sizes on our landscape drawing?
Yes. Our technicians calculate the plate forming data for each piece, so sizes and curvature follow your drawing rather than a fixed catalogue size.
Can the pebbles sit in water?
Yes. They are used in water system landscape as well as on lawns. Tell us the water condition so the fixing detail and drainage of the hollow body can be detailed for it.
What finishes are available besides mirror polish?
Brushed satin, colour electroplating and baked lacquer are all produced in house. Colour samples are made for approval before production.
How are the pieces packed for export?
Polished faces are covered with protective film and the pieces are crated. Tell us the destination port and we will confirm the crating arrangement.
Can we see a sample before the full cluster is made?
Yes. One piece can be produced for approval first, which is the normal route on larger clusters.
How do we get a price?
Send the layout drawing or a sketch with sizes and quantities by email or WhatsApp and we will quote against it.
Quote Stainless Steel Pebbles at Your Size
Tell us the size, the quantity and where it will be installed. A drawing or a reference photograph is enough to start.