Jellyfish Swarm
Stainless steel jellyfish sculptures are forged from 304 stainless steel into open, reticulated forms that mimic the...
View Details
Stainless Steel Sculpture
Furnishing Articles
Stainless steel branch bird sculptures are forged from 304 stainless steel plate into organic, flowing forms that suggest flight and natural movement. Installed in exhibition halls, they function as focal points that draw the eye without dominating the space. The pieces are built to a buyer's layout drawing, so scale and placement match the architectural intent of the space.
| Material | Stainless steel, 304 as standard |
|---|---|
| Forming | Hand forged and welded from plate |
| Standard Finish | Mirror polish |
| Alternative Finishes | Brushed satin, colour electroplating, baked lacquer |
| Typical Use | Exhibition hall and interior architectural spaces |
| Sizes | Built to the buyer layout drawing |
| Category | Stainless Steel Sculpture |
| Made In | Pingshan District, Shenzhen, China |
Key Benefits
- Forged from 304 stainless steel plate, so the structure holds its shape and resists deformation over time
- Mirror polish finish reflects ambient light and surrounding architecture, making the piece feel integrated into the space
- Hollow construction keeps weight low relative to size, reducing the need for heavy mounting hardware
- No sharp edges or protrusions, which suits public spaces with high foot traffic
- Can be installed in dry or climate-controlled exhibition environments without finish degradation
Application Scenarios
- Exhibition halls and museum galleries where a sculptural element adds visual interest without competing with displays
- Corporate lobbies and reception areas that need a subtle but memorable art feature
- Art installations in public buildings where a lightweight, durable piece is required
- Interior spaces with high ceilings where a suspended or freestanding sculpture adds vertical interest
- Showrooms and design studios that use art to convey a modern, industrial aesthetic
Who It Is For
- Exhibition hall designers and curators specifying sculptural elements for thematic displays
- Corporate interior buyers sourcing art that fits within a modern, minimalist aesthetic
- Public building architects integrating art into non-residential interior spaces
- Art consultants assembling a curated set of pieces across a multi-room installation
- Design firms developing a consistent visual language across a client’s portfolio of spaces
Problems It Solves
- Standard catalogue sculptures often come in fixed sizes that do not fit the exact scale of a given exhibition space
- Cast or solid metal pieces of this form are too heavy to install without structural support
- Painted or coated finishes on metal art can chip or fade in indoor lighting and air-conditioned environments
- Many sculptural forms are too literal or decorative, failing to serve as a subtle architectural accent
- Lack of custom sizing means buyers must compromise on layout or scale to fit available stock
Technical Features
- Body forged and welded from 304 stainless steel plate, then ground and mirror polished
- Seamless appearance with weld lines dressed back before final polish
- Hollow construction reduces weight while maintaining structural integrity
- Fixing detail adapted to wall mounting, floor stand, or ceiling suspension based on site condition
- Finish options include mirror polish, brushed satin, colour electroplating, and baked lacquer
Materials
- 304 stainless steel plate for the forged body and fixing components
- Stainless steel welding consumables matched to the parent plate to maintain finish uniformity
Quality Control
- Formed shape checked against the approved drawing before welding begins
- Weld seams inspected and dressed until they are invisible under the final polish
- Polished surface checked under angled light for grinding marks or orange peel
- Protective film applied to every polished face before crating
Customization Options
- Any size and any number of pieces built to your layout drawing
- Mirror, brushed, colour plated, or baked lacquer finish per piece or per installation
- Fixing detail adapted to wall, floor, or ceiling mounting based on site condition
- Sample piece produced for approval before full production begins
Use Guide
- Send the exhibition layout drawing with the intended position and scale of the bird marked
- Confirm whether the piece will be wall-mounted, floor-standing, or suspended, as the fixing detail differs
- Leave the protective film in place until all surrounding construction and finishing is complete
- Clean with water and a soft cloth; do not use abrasive pads on the mirror surface
- Re-polish locally if a scratch occurs during site installation rather than replacing the piece
Manufacturing Process
How This Piece Is Made
- Review of the exhibition layout drawing and agreement on placement, scale, and mounting method
- Plate forming data calculated for each section of the bird form before any steel is cut
- Hand forging of the plate into the organic branch and wing shapes
- Welding of the closed body with attention to seam alignment and symmetry
- Grinding through successive grits followed by mirror polishing
- Fixing detail welded on, protective film applied, and crating prepared for export
Every stage happens in the same workshop in Pingshan, Shenzhen, which is why a set of pieces arrives matching.
Comparison
How It Compares With the Alternatives
Compared with Cast bronze bird sculptureCast bronze has a heavier presence and richer tone, but it is more expensive and heavier to install
Compared with Painted carbon steel birdPainted steel is cheaper but will chip or fade in indoor environments with consistent lighting
Compared with Resin or fiberglass birdResin is lighter and can be molded into complex forms, but it lacks the structural integrity and reflective finish
Compared with Standard catalogue metal sculptureCatalogue pieces are fixed in size and cannot be adjusted to fit a specific layout or scale
Where This Piece Is Used
Urban Public Art and LandscapeApplication notesCommercial Property and RetailApplication notesDesigners and Art ConsultantsApplication notesMountain and Wolves Landscape InstallationProject notesForged Stainless Steel Giant MushroomsProject notesChoosing Stainless Steel for Outdoor SculptureMaterial GuideFrom Drawing to Installed SculptureProcess GuideMaintaining Outdoor Metal SculptureMaintenance Guide
Related
More From Stainless Steel Sculpture
6M Globe
A 6M diameter globe constructed from a tubular frame of 304 stainless steel, forming a longitude and latitude grid....
View Details
The Sheep
The Sheep is a stainless steel animal sculpture with lifelike modeling, forged from 304 stainless steel plate and...
View Details
The Elephant
The elephant is a stainless steel animal sculpture crafted from 304 stainless steel with a lifelike form and high...
View DetailsFAQ
Furnishing Articles Questions
What material are the sculptures made from?
They are forged from 304 stainless steel plate and then mirror polished. 304 is used because it holds a polish and resists corrosion in indoor environments.
Can you make them in the sizes on our layout drawing?
Yes. Our technicians calculate the forming data for each steel plate, so the size, curvature, and height follow your drawing exactly.
Can the sculpture be mounted on a wall or ceiling?
Yes. Fixing details are built into the piece to suit wall, floor, or ceiling mounting. Tell us your installation method and we will adapt the detail.
What finishes are available besides mirror polish?
Brushed satin, colour electroplating, and baked lacquer are all produced in house. We provide samples for approval before production.
How are the pieces packed for export?
Polished faces are covered with protective film and the pieces are crated. We confirm the crating arrangement based on the destination port.
Can we see a sample before the full set is made?
Yes. One piece can be produced for approval before the full set goes into production. This is standard practice for custom installations.
How do we get a price?
Send the layout drawing or a sketch with sizes and quantities by email or WhatsApp and we will quote against it.
Quote Furnishing Articles at Your Size
Tell us the size, the quantity and where it will be installed. A drawing or a reference photograph is enough to start.