Part number SLL-B2225 54W/B2226 72W/B2227 126W/B2228 144W/B2229 180W
New Straight Remote Control WHITE RGB LED Light Bar 54W 72W 126W 144W 180W
Five power variants (54W to 180W) deliver high brightness using 3W high-intensity LEDs and RGB LEDs, with a flood beam (120°) or spot beam (60°) option. The bar is rated IP68 and IP6K9K, meets SAE J1455 standards, and operates from 9 to 36V DC, making it suitable for 12V and 24V systems. A remote control allows real-time switching between color modes and lighting patterns, reducing the need for manual wiring changes.
- Five power options (54W to 180W) allow matching output to vehicle or machine lighting needs without overspecifying
- Flood (120°) and spot (60°) beam patterns cover both wide-area and long-distance visibility
- IP68 and IP6K9K sealing with SAE J1455 compliance ensures performance in high-pressure wash, dust storms, and extreme weather
- Remote control with integrated mode and color switch enables instant changes to lighting mode and color without accessing the light bar
- 3W high-intensity white LEDs and RGB LEDs deliver bright, vibrant output with a 6000-6500K color temperature for clear visibility
Application Scenarios
Where This Lamp Is Used
- Front and side lighting on off-road vehicles and ATVs operating in night terrain or forested areas
- Emergency and rescue lighting on response vehicles where rapid color and mode changes are needed
- Auxiliary lighting on golf carts and utility vehicles used in parks, resorts, or large campuses after dark
- Deck and hull lighting on boats and marine vessels where salt spray and water immersion are common
- Lighting on agricultural machinery and mining equipment that operate in dusty, wet, or vibration-heavy conditions
Buyer Fit
Who It Is For
- Distributors of off-road vehicle lighting needing multiple power and beam options in one product line
- Fleet operators fitting light bars on 12V and 24V vehicles with a single part number across voltage ranges
- Machinery OEMs integrating lighting into new models where remote control simplifies user interface
- 4x4 accessory brands building a private label range with customizable color and mode features
- Fleet workshops replacing halogen or basic LED bars that lack remote control or color flexibility
Why It Exists
Problems It Solves
- Halogen or low-output LED bars fail to provide sufficient visibility in wide or long-range applications
- Fixed-color or non-remote lighting requires manual rewiring or multiple units to change modes
- Non-IP6K9K sealed bars degrade after pressure washing or exposure to high-pressure water jets
- Narrow beam bars leave the near edges of the machine dark, increasing risk during close maneuvers
- Lack of remote control forces operators to stop and adjust lights manually, reducing operational efficiency
Build Detail
Technical Features
- Five power variants: 54W, 72W, 126W, 144W, 180W with 3W high-intensity white LEDs and RGB LEDs
- Beam options: Flood (120°) or Spot (60°) for flexible coverage based on application
- Color temperature: 6000-6500K for daylight-like white light with high clarity
- Operating voltage: 9-36V DC, compatible with 12V and 24V vehicle systems
- Remote control with mode and color switch for real-time changes without physical access
- IP68 and IP6K9K sealing with SAE J1455 compliance for full protection against water, dust, and high-pressure jets
- Operating temperature range: -40 to +85 degrees Celsius for use in extreme climates
- Bare wire leads with standard connectors; Deutsch or other connectors available on request
- 50,000-hour rated lifetime under continuous operation
Data Sheet
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-B2225 (54W), SLL-B2226 (72W), SLL-B2227 (126W), SLL-B2228 (144W), SLL-B2229 (180W) |
|---|---|
| Power | 54W, 72W, 126W, 144W, 180W |
| Voltage | 9-36V DC |
| Beam Type | Flood (120°), Spot (60°) |
| LED Type | 3W high-intensity white LEDs + RGB LEDs |
| Color Temperature | 6000-6500K |
| Working Life | 50,000 hours |
| Waterproof Rating | IP68, IP6K9K, SAE J1455 |
| Operating Temperature | -40 to +85 degrees Celsius |
| Remote Control | RF controller with mode and color switch |
| LED Count | Multiple 3W white LEDs and RGB LEDs |
| Input Connector | Bare wire leads, Deutsch connector available on request |
| Housing Material | Die-cast aluminium |
| Lens Material | Anti-scratch polycarbonate |
| Bracket Material | Steel with corrosion-resistant coating |
| Dimensions | Varies by model, standard lengths available |
| Certification | IP68, IP6K9K, SAE J1455 |
Materials
Materials Used
- Die-cast aluminium housing for heat dissipation and structural strength
- Anti-scratch polycarbonate lens for impact and UV resistance
- Steel brackets with corrosion-resistant coating for mounting durability
- Silicone gaskets and sealed cable glands for IP68 and IP6K9K sealing
- High-intensity 3W white LEDs and RGB LEDs for brightness and color variation
Manufacturing
How This Lamp Is Built
01
Die casting of the aluminium housing and heat sink
02
Polishing and surface treatment for corrosion resistance
03
Assembly of LED modules with 3W white and RGB LEDs
04
Lens bonding with UV-resistant adhesive and gasket sealing
Testing
Quality Control on This Model
- Photometric output verified using an integrating sphere to confirm lumen output
- IP68 and IP6K9K sealing tested under high-pressure water jets and dust exposure
- Vibration testing on a vibration test machine to simulate real vehicle mounting conditions
- Salt spray corrosion testing on brackets and housing to verify coating durability
- High and low temperature alternating humidity testing across the -40 to +85 degrees Celsius range
- Remote control signal range and stability tested in multiple environments
OEM and ODM
Customisation Options
- Deutsch or other connector types instead of standard bare wire leads
- Custom bracket design to match specific vehicle or machine mounting points
- Private label logo on the housing and printed carton
- Alternative beam pattern (e.g., spot instead of flood) on request
- Mixed cartons combining multiple models for trial orders or fleet testing
Comparison
How It Compares With the Alternatives
| Standard white-only LED light bar | Adds RGB color and remote control for dynamic lighting without extra wiring |
|---|---|
| Fixed beam light bar | Offers flood and spot beam options to suit different operational needs |
| Non-remote control LED bar | Remote control allows mode and color changes without stopping or accessing the light |
| Lower IP rating bar (e.g., IP65) | IP68 and IP6K9K rating ensures survival in high-pressure wash and marine environments |
| Single power variant bar | Five power levels allow precise matching to vehicle electrical systems and lighting requirements |
Use Guide
How to Fit and Use It
- Choose the appropriate bracket type based on your vehicle’s mounting surface and angle
- Install the light bar using the supplied brackets and ensure the cable entry points downward
- Route the bare wire lead or connector through a sealed gland to maintain IP68 integrity
- Pair the remote controller with the light bar following the instruction manual
- Use the remote to switch between modes and colors—no need to access the light bar during operation
- Avoid direct contact with high-pressure water jets on the remote control or cable junctions
- Clean the lens with water and a soft cloth only; avoid solvents that may damage the anti-scratch coating
Buyer Questions
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the light bar shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this light bar work on both 12V and 24V vehicles
Yes. The operating range is 9 to 36V DC, so the same part number can be used on 12V and 24V systems.
Can I get a remote control with a different range or frequency
The standard RF remote operates within typical range; custom RF options are available on request.
Can you supply the light bar with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Get a Price on New Straight Remote Control WHITE RGB LED Light
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.