CHEVY 50-INCH STRAIGHT LED UPPER WINDSHIELD KIT (2007-2013 CHEVY )
The SUNLITEC 50-inch straight LED upper windshield kit is designed for 2007-2013 GM Chevys to mount a standard 50-inch LED light bar above the windshield without obstructing the driver's view. The kit uses a durable steel mounting system with a black powder coat finish and is engineered to fit light bars with 8mm mounting posts. It enables a clean, aerodynamic installation that keeps the light bar above the windshield while maintaining full visibility during night driving.
- Mounts a 50-inch LED light bar above the windshield without blocking the driver's view
- Durable steel construction with black powder coating resists corrosion and wear
- Compatible with both single row and dual-row curved LED light bars
- Designed for 8mm mounting post configuration used on standard 50-inch light bars
- Aerodynamic profile reduces wind noise and drag on highway driving
Where This Lamp Is Used
- Adding auxiliary lighting to 2007-2013 Chevrolet Silverado and GMC Sierra trucks used in off-road or night operations
- Installing a 50-inch LED light bar on a fleet vehicle where visibility and clean mounting are required
- Mounting a light bar on a 4WD or 2WD GM pickup used in rural or low-light environments
- Upgrading a standard light bar to a higher visibility position without modifying the windshield frame
- Fitting a light bar on a vehicle that must maintain a clean, OEM-style appearance
Who It Is For
- Distributors of 4x4 and truck accessory lighting needing a reliable mounting kit for GM vehicles
- Fleet operators upgrading older Chevys with modern LED lighting for night work
- Machinery and vehicle OEMs integrating auxiliary lighting into new or modified vehicle builds
- 4x4 accessory brands building private label lighting kits for GM trucks
- Individual vehicle owners installing a 50-inch LED light bar on a 2007-2013 Chevy without drilling into the windshield frame
Problems It Solves
- Older mounting systems obstruct the driver's view when placing a light bar directly on the windshield
- Cheap brackets warp or corrode under UV exposure and vibration from off-road use
- Incompatible mounting patterns prevent standard 50-inch light bars from being installed securely
- Lack of aerodynamic design causes wind noise and turbulence at highway speeds
- No warranty or support for mounting hardware leads to liability when a light bar fails during use
Technical Features
- Steel mounting system with semi-gloss black powder coating for corrosion resistance
- Designed for 50-inch LED light bars with 8mm mounting posts
- Compatible with single row and dual-row curved LED light bars
- Mounts above the windshield with a flush, aerodynamic profile
- No drilling into the windshield required, preserving OEM integrity
- One year warranty on the mounting kit for manufacturing defects
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | Not specified in source |
|---|---|
| Kit Type | Upper windshield mounting kit |
| Vehicle Fitment | 2007-2013 GM Chevrolet (Chevy) 4WD/2WD |
| Light Bar Length | 50-inch |
| Mounting Post Size | 8mm |
| Mounting Position | Above windshield |
| Material | Steel with black powder coating |
| Finish | Semi-gloss black |
| Warranty | One year |
| Compatibility | Single row and dual-row curved LED light bars |
| Installation | No windshield drilling required |
| Mounting Pattern | Standard 50-inch light bar pattern |
| Use Case | Upper windshield mount for GM pickups and SUVs |
Materials Used
- Steel mounting frame with semi-gloss black powder coating
- 8mm mounting posts compatible with standard 50-inch LED light bars
- Corrosion-resistant finish for outdoor and high-vibration environments
How This Lamp Is Built
Steel frame fabrication using precision cutting and bending
Powder coating application in semi-gloss black for durability
Quality inspection of mounting hole alignment and post placement
Final assembly and packaging with installation guide
Quality Control on This Model
- Visual inspection of powder coating for uniformity and defects
- Dimensional check of mounting holes and post alignment
- Load test on the mounting frame to verify structural integrity under vibration
- Corrosion resistance check via salt spray test on coated surfaces
- Functional test to confirm compatibility with standard 50-inch light bars
Customisation Options
- Custom mounting bracket pattern for non-standard light bar configurations
- Alternative finish (e.g. matte black or textured) on request
- Private label branding on the mounting kit or packaging
- Custom packaging for bulk or trial orders
- Alternative cable routing or bracket orientation for specific vehicle models
How It Compares With the Alternatives
| Windshield-mounted light bar with adhesive or clamp-on brackets | This kit uses a steel frame with proper mounting posts, offering higher load capacity and longer service life than adhesive or clamp systems |
|---|---|
| Aftermarket windshield bracket that requires drilling into the windshield | This kit installs without drilling, preserving the windshield's structural integrity and avoiding potential leaks or cracks |
| Universal mounting kit with adjustable arms | This kit is designed specifically for 50-inch light bars on 2007-2013 Chevys, ensuring a precise fit without over-adjustment or wobble |
| Lower bumper or grille-mounted light bar kit | This upper windshield mount keeps the light bar above the windshield, providing unobstructed forward visibility while maintaining a clean aesthetic |
How to Fit and Use It
- Verify the light bar has 8mm mounting posts before installation
- Clean the windshield and mounting area before positioning the bracket
- Align the bracket with the top edge of the windshield and secure with provided hardware
- Ensure the light bar is level and does not obstruct the driver's forward view
- Tighten all bolts to the recommended torque to prevent vibration loosening
- Check the installation after driving at highway speeds to confirm stability
Questions About This Model
Can I use this kit with any 50-inch LED light bar
Yes, as long as the light bar has 8mm mounting posts and fits the standard 50-inch pattern
Does this kit require drilling into the windshield
No. The kit mounts above the windshield using a steel bracket that attaches to the vehicle frame or trim without drilling
Is the kit compatible with both single row and dual-row light bars
Yes. It is designed to work with both single row and dual-row curved 50-inch LED light bars
What is the warranty on this mounting kit
One year warranty covers manufacturing defects in materials and workmanship
Can I install this kit myself
Yes. The kit includes all necessary hardware and instructions for a straightforward installation
Will this kit affect my vehicle's aerodynamics
No. The design is aerodynamic and minimizes wind noise and drag at highway speeds
Can I get a custom version for a different vehicle model
Yes. OEM and ODM services are available for custom mounting kits based on specific vehicle models
Models Often Compared With This One
Guides and Machine Briefs
Get a Price on CHEVY 50-INCH STRAIGHT LED UPPER WINDSHIELD KIT
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.