Cartridge Dust Collector for Powder and Granule Charging
A fan pulls dust-laden air away from the charging point, cartridge filters intercept the particles, clean air is exhausted and the collected dust falls back into the storage hopper or collection bin. The material you paid for stays in the process instead of ending up on the floor.
Application
Prevents dust emissions and environmental contamination during the manual or automated charging of powders and granules into the production line, while simultaneously recovering valuable materials.
Who It Is For
- Plants with a manual sack tipping or bag dump charging station
- Automated charging points where dust escapes at the transfer
- Operations handling expensive powders where recovered material has real value
- Sites working to reduce operator dust exposure and housekeeping load
What Goes Wrong Without It
Dust escaping at the charging point settles across the plant and becomes a cleaning and compliance problem
Fine material lost as airborne dust is paid-for product that never reaches the batch
Operators at a charging station carry the highest dust exposure in the building
Dust migrating into weighing equipment is one of the main causes of long-term accuracy drift
Key Benefits and Product Features
Negative pressure capture at source
A fan generates negative pressure that draws dust-laden air into the filter unit before it can escape into the room.
Cartridge filtration
Cartridge filters intercept the dust particles and allow clean air to be exhausted.
Material recovery
Collected dust settles back into the storage hopper or dust collection bin rather than being discarded.
Suits manual and automated charging
The same unit covers operator sack tipping and automated charging into the production line.
How the Machine Is Built
The system uses a fan to generate negative pressure, drawing dust-laden air into the filter unit. Cartridge filters intercept the dust particles, allowing clean air to be exhausted, while the collected dust settles back into the storage hopper or dust collection bin.
Technical Data
Values marked TBC are confirmed against your duty at quotation. We do not publish figures we cannot stand behind.
| Filtration type | Cartridge filter unit |
|---|---|
| Working principle | Fan-generated negative pressure |
| Material recovery | Collected dust returned to storage hopper or dust collection bin |
| Duty | Manual or automated charging of powders and granules |
| Air volume, filter area, fan power, dimensions | TBC - quoted against the charging point and material |
How It Compares
Versus a bag filter house
A bag house suits large central extraction. A cartridge unit at the charging point is compact, captures at source and returns the recovered material straight back to the hopper.
Versus room ventilation
General ventilation dilutes dust after it has escaped. Capture at source removes it before it enters the room, which is the only approach that also recovers the material.
Versus no extraction
Without capture, the dust becomes a housekeeping cost, an exposure risk and a slow accuracy loss in the weighing equipment downstream.
Specifying and Installing It
Describe the charging point: manual sack tipping, bag dump or automated transfer, and how many charges per hour.
Send the material data - fine powders and free-flowing granules generate very different dust loads.
Confirm where the recovered material should return: the storage hopper, or a separate dust collection bin.
Plan the exhaust route for the cleaned air and the access needed for cartridge changes.
Set a filter inspection interval from the start; capture efficiency falls quietly as cartridges load.
Customisation: material of construction, weighing capacity, control tier and host protocol are all specified against your process. Tell us what the line already runs and we build to it.
Other Machines in This Range
High-Precision Feeder
A screw feeder, a hopper weighing unit and a control unit working as one loop. The controller reads material weight and screw speed in real time,…
View Specifications
Automatic Discontinuous Totalizing Hopper Weigher
A batch totalising scale for in-plant metering. Material fills a weighing hopper, the weight is recorded, the hopper discharges and the controller…
View Specifications
Fully Automatic Bottom-Fill Packaging Machine Without Hopper
A complete bagging line in one frame: it loads the bag, fills it from the bottom through a valve, weighs it, sews the mouth and conveys the finished…
View SpecificationsBackground Reading
FAQ About the Dust Collector
Does the collected dust go to waste?
No. The collected dust settles back into the storage hopper or the dust collection bin, so valuable material is recovered rather than discarded.
Does it work with automated charging as well as manual tipping?
Yes. It is designed for both manual and automated charging of powders and granules into the production line.
How is the dust actually captured?
A fan generates negative pressure that draws dust-laden air into the filter unit, where cartridge filters intercept the particles and clean air is exhausted.
Can it be supplied together with the weighing and packing equipment?
Yes. Charging points are normally protected as part of the same project as the feeder, hopper weigher or packing machine.
What air volume and filter area will we need?
That is quoted against the specific charging point and material. Send the duty and we will size the unit.
Request a Quotation for the Dust Collector
Send the material, bulk density, throughput and accuracy target. Our engineers reply with the specification and price within 24 hours.